Get AUDIO AND TELEMATICS Guide for Citroen C-Crosser Suv First Generation (2007-2012)

A U D I O a n d T E L E M AT I C S

AUDIO CD SYSTEM

CD slot.

Eject one or more CDs.

Load one or more discs.

Selection and adjustment

of audio settings

(BASS, TREBLE, ...).

Manual search for a lower

or higher radio frequency/

PTY.

Audio system On/Off.

Decrease/Increase volume.

Functions setting mode

(AF, REG, TP, SCV, ...).

Search for the previous or

next MP3 folder.

Selection of CD/

Changer mode.

Selection of radio mode.

Selection of waveband

(FM, MW, LW).

Automatic station storing

(autostore).

Automatic search for

a lower radio frequency.

Search for the previous

track.

Automatic search for

a higher radio frequency.

Search for the next track.

XI

164

A U D I O a n d T E L E M AT I C S

Fast backwards play.

Display CD-Text/MP3/

Tag ID3 information.

Multifunction screen.

Search for TP trafﬁc

information.

Scroll information by page.

Activation/Deactivation

of PTY.

Play the beginning of each

track (MP3 folder/disc).

Repeat

(track/MP3 folder/disc).

Manual storing and recall of

radio stations/

PTY (12 to 17).

Selection of

the previous disc.

Random play

(tracks/MP3 folder/disc).

Fast forwards play.

Selection of the next disc.

XI

A U D I O a n d T E L E M AT I C S

STEERING MOUNTED CONTROLS

Switching on Searching in radio mode

Press button 1 for more than two seconds. Press button 4 or 5 to search for a

higher or lower radio frequency respec-

tively.

The last source selected before switching

off comes back into operation.

Searching in CD mode

Press button 4 or 5 to select the next or

previous track on the CD respectively.

Switching off

Press button 1 for more than two seconds.

Press and hold button 4 or 5 for fast for-

wards or fast backwards playing of the

current track of the CD respectively.

1. On/Off and selection of radio or

CD mode

2. Volume decrease

3. Volume increase

Selecting the source

Press button 1.

The source changes in the following order:

FM1/FM2/FM3/MW/LW/CD/FM1...

4. Search for a higher radio frequency/

Next track/Fast forwards play

5. Search for a lower radio frequency/

Previous track/Fast backwards play

While a track is being played, press

button 5 once to return to the beginning

of this track.

Adjusting the volume

Press and hold button 2 or 3 to decrease

or increase the volume respectively.

They can be used when the ignition

switch is in the "ON" or "ACC" position.

XI

166

A U D I O a n d T E L E M AT I C S

GENERAL FUNCTIONS

Switching on

Setting the audio modes

Selecting the musical ambience

"TYPE"

Press the "PWR" button.

Press the "SOUND" but-

Turn the "SOUND" dial; the

musical ambiences change

in the following order:

The last source selected be-

fore switching off resumes

operation.

ton several times; the audio

modes change in the follow-

ing order:

CLASSIC/JAZZ/POP/ROCK/

HIP-HOP.

Once the ambience has been selected,

SUB PUNCH/TYPE/FIELD/

BASS/MID/TREBLE/FAD-

ER/BALANCE/OFF.

The audio equipment functions can be

used when the ignition switch is in the

"ON" or "ACC" position.

press the "SOUND" button to conﬁrm.

"CLASSIC": optimises the acoustics to

obtain perfect equalisation of the sound

for classical music.

"JAZZ": optimises the acoustics to

obtain an ambient sound with speciﬁc

modulations in the bass, mid tone and

treble for jazz.

"POP": optimises the acoustics to

obtain clear vocals and modulation of

the bass and treble for pop music.

"ROCK": optimises the acoustics to

obtain a sound in harmony with the

rhythm which places the emphasis on

the mid tone for rock music.

Quick access mode

Switching off

To access the personalised sound func-

tions quickly, press and hold this button,

then turn it to reach the personalised

sound setting of your choice.

Press the "PWR" button again.

Release the button to store the setting.

Adjusting the volume

Turn the "VOL" dial respec-

tively to the left to decrease

the volume or to the right to

increase it.

"Hold" mode

If you press this button for more than

2 seconds in the audio setting mode,

the system switches to "Hold" mode.

The audio mode selected will be re-

tained until you press this button again

for more than 2 seconds.

"HIP-HOP": optimises the acoustics to

obtain a powerful sound and accentua-

tion of the bass for hip-hop music.

The audio setting mode is deactivat-

ed when the radio is operated or a

CD is played or after approximately

10 seconds without any action.

XI

If the "TYPE" is changed, the sound

cuts out brieﬂy.

167

A U D I O a n d T E L E M AT I C S

Selecting the surround effect

"FIELD"

Setting the bass "BASS"

unit "SUB PUNCH"

Turn the "SOUND" dial to set the vol-

ume of the bass unit.

Only vehicles ﬁtted with the "Premium

Sound" system can offer the "SUB

PUNCH" setting.

Turn the "SOUND" dial to

set the required bass value.

Turn the "SOUND" dial; the

surround effects change in

the following order:

NORMAL/STAGE/LIVE/HALL.

Setting the mid tone "MID"

Turn the "SOUND" dial to set the re-

quired mid tone value.

Once the surround effect has been se-

lected, press the "SOUND" button to

conﬁrm.

If the "SUB PUNCH" is changed, the

sound cuts out brieﬂy.

"NORMAL": produces a sound in which

the voices are at the front and the in-

struments surround the listener.

"STAGE": produces a sound in which

the voices are immediately facing the

listener, as on a stage.

"LIVE": produces a sound similar to

that of a live show, in which the sound

reaches the listener from all directions.

Setting the treble "TREBLE"

Automatic volume adjustment

"SCV"

Turn the "SOUND" dial to set the re-

quired treble value.

This permits automatic adjustment of

the "VOLUME", "BASS", "MID" and

"TREBLE" settings in relation to the ve-

hicle speed.

Setting the front/rear sound

distribution "FADER"

Press the "SOUND" button

for more than two seconds

to gain access to the func-

tions setting mode.

"HALL": produces a sound similar to

that of a concert hall with deﬂection of

the sound.

Turn the "SOUND" dial to set the bal-

ance of the volume of the front and rear

speakers.

Then, press this same button

several times; the functions

setting mode changes in the following

order:

AF/CT/REG/TP-S/PTY (languages)/SCV/

PHONE/OFF.

Setting the right/left sound

distribution "BALANCE"

Turn the "SOUND" dial to set the bal-

ance of the volume of the right and left

speakers.

Turn the "SOUND" dial respectively to

the left to deactivate the function or to

the right to activate it.

XI

If the "FIELD" is changed, the sound

cuts out brieﬂy.

If the value "0" is set, an audible signal

will be heard.

168

A U D I O a n d T E L E M AT I C S

RADIO

Selecting radio mode

Manual station search

Automatic station storing

Press the "PWR" button

or the "AM/FM" button to

switch on the radio.

Turn the "TUNE" dial re- Stations can only be stored automati-

spectively to the left to cally on wavebands FM3, MW and LW.

search the lower frequen-

cies or to the right to search

the higher frequencies.

Storing new stations replaces the pre-

vious stations.

This storing can be activated automatically

irrespective of the waveband selected.

Selecting the waveband

Manual station storing

Press the "AM/FM" button

for more than two seconds.

Press the "AM/FM" button

several times in succession

to select the waveband; it

changes in the following

order: FM1/FM2/FM3/MW/

LW/FM1...

You can store up to six stations on each

waveband.

Storing a new station replaces the pre-

vious station.

The six stations offering the best recep-

tion are stored and classiﬁed from the

weakest to the strongest on the six cor-

responding buttons.

Automatic station search

Press one of the six buttons "1" to "6"

until an audible signal is heard.

Recalling stored stations

Press the "SEEK ꢀ" or

"SEEK ꢁ" button to search

the lower frequencies or the

higher frequencies respec-

tively.

The sound cuts out then becomes au-

dible again when the station has been

stored.

The number of the button and the as-

sociated radio frequency appear on the

screen.

Press one of the six buttons "1" to "6".

The station corresponding to the wave-

band selected appears on the screen.

The search begins automatically and

stops at the ﬁrst station found.

To recall the pre-set stored setting,

press the button and release it within

two seconds.

XI

Disconnecting the battery terminals

clears the stored radio stations.

169

A U D I O a n d T E L E M AT I C S

"RDS"

The "Radio Data System" (RDS) function

on the FM waveband permits:

Alternative frequencies "AF"

Traffic information "TP"

Your radio automatically checks and

selects the best frequency for the radio

station to which it is tuned (if the station

broadcasts on several transmitters or

frequencies).

The frequency of a radio station cov-

ers approximately 30 miles (50 km). The

change from one frequency to another

explains the temporary loss of reception

during a journey.

The "Trafﬁc Program" (TP) function per-

mits automatic and temporary switching

to an FM station broadcasting trafﬁc in-

formation.

The radio station or the source that you

are listening to at this point is paused.

Once the trafﬁc information has ended,

the system switches back to the radio

station or the source that you were lis-

tening to initially.

-

access to the display of information,

such as the name of the station, ...

tuning to the same station while trav-

elling through different regions,

temporary tuning to trafﬁc information

announcements.

Most FM stations use RDS. These

stations transmit non-audible data in

addition to their programmes.

The data transmitted in this way allows

you access to various functions, mainly

displaying of the name of the station,

automatic station following or temporary

tuning to trafﬁc information announce-

ments.

The RDS allows you to continue listen-

ing to the same station by means of the

alternative frequency following. How-

ever, in certain conditions, this RDS

frequency following cannot be provided

throughout the country. Radio stations

do not cover the whole country, which

explains the loss of reception of the sta-

tion during a journey.

If the station to which you are listening does

not have several frequencies in the region in

which you are currently located, you can de-

activate the alternative frequency following.

Press the "TP" button.

"TP" appears on the display.

If the station is compatible,

"RDS" also appears.

Regional following mode "REG"

Some stations are organised in a network.

In different regions, they broadcast diffe-

rent or shared programmes depending

on the time of day.

If the radio detects trafﬁc information,

"TRAF INF" appears on the display,

followed by the frequency of the broad-

casting station, then its name.

The volume is different from that of the

previous source.

You can follow:

-

a regional station only,

the entire network, with the possibility

that you will be listening to a different

programme.

Following the broadcasting of the trafﬁc

information, the volume returns to that

of the source prior to the interruption.

On long distance journeys, when the

stored station becomes weak, the ra-

dio searches ﬁrst for another frequen-

cy for the same station (AF). Then, if

this fails, it searches for a frequency

broadcasting the regional programme

(REG). If this also fails, the radio re-

turns to the stored station.

The "AF", "REG" and "TP"

functions can be deacti-

vated or activated via the

"TUNE" button functions

setting mode.

When "TP" appears on the display,

the radio stops solely at RDS stations

broadcasting trafﬁc information.

XI

170

A U D I O a n d T E L E M AT I C S

Search for a "PTY" broadcast

Emergency broadcasts

"ALERT"

Press the "PTY" button.

An emergency broadcast automatically

and temporarily interrupts the FM station

or the source that you are listening to.

The message "ALERT" appears on the

display and the volume is different from

that of the previous source.

Following the emergency broadcast,

the message disappears and the volume

returns to that of the source prior to the

interruption.

Turn the "TUNE" dial to se-

lect the type of programme

required.

The sound cuts out then becomes au-

dible again when the programme has

been stored.

The number of the button and the asso-

ciated PTY programme appear on the

display.

Two seconds later, the radio searches

for a broadcast which corresponds to

your selection; the type of PTY selected

ﬂashes on the display.

Once the station has been found, its

name appears on the display.

To recall the pre-set memory setting,

press the button and release it within

two seconds.

You can press the "SEEK ꢀ" or "SEEK ꢁ"

buttons to ﬁnd another station.

Themed type of programme

"PTY"

Changing the display language of

the "PTY" programme

If no station is found corresponding

to your selected type of programme,

"NONE" appears on the display for

ﬁve seconds and the radio returns to

the previous station.

Some stations offer the option of listen-

ing to a themed type of programme as a

priority, selected from the list available

below:

NEWS,AFFAIRS, INFO, SPORT, EDUCATE,

DRAMA, CULTURE, SCIENCE, VARIED,

POP M, ROCK M, EASY M, LIGHT M,

CLASSICS, OTHER M, WEATHER, FINANCE,

CHILDREN, SOCIAL, RELIGION, PHONE IN,

TRAVEL, LEISURE, JAZZ, COUNTRY,

Press the "TUNE" button for

more than two seconds to

access the functions setting

mode.

Storing a "PTY" programme

Then, press this button several times in

succession; the functions setting mode

changes in the following order:

AF/CT/REG/TP-S/PTY (languages)/SCV/

PHONE/OFF.

You can store up to six PTY programmes.

NATION M, OLDIES, FOLK M, DOCUMENT. Each new programme stored replaces

the previous one.

Turn the "TUNE" dial to the left or to the

right to select the language (ENGLISH,

FRANCAIS, DEUTSCH, SVENSK,

ESPAGNOL, ITALIANO).

Turn the "TUNE" dial to set

the PTY programme to be

stored.

Press one of the six but-

tons "1" to "6" for more than

two seconds.

XI

171

A U D I O a n d T E L E M AT I C S

Functions setting mode

CD PLAYER

Audio CDs

This can play audio CDs (CD-DA, CD-

Text, CD-R/RW) or MP3 CDs.

This permits activation or deactivation

of the functions below.

Fast search

Press and hold button "ꢂ"

Press the "TUNE" button for

more than two seconds to

access the functions setting

mode.

Then, press this button sev-

eral times in succession;

Selecting CD mode

or "ꢃ" to carry out a fast

backwards or forwards

search respectively.

After inserting a disc, printed face up-

wards, the player starts automatically.

Play begins when the button is released.

the functions setting mode changes in

the following order:

AF/CT/REG/TO-S/PTY (languages)/SCV/

PHONE/OFF.

Turn the "TUNE" dial respectively to the

If the player already con-

tains a disc, press the "CD"

button.

Selecting a track

"CD", the track number and

Press button "ꢀ" or "ꢁ" to

select the previous or next

track respectively.

left to deactivate the function ("OFF") or the playing time appear on the screen.

to the right to activate it ("ON").

Repeating a track

Insert circular compact discs only.

8 cm compact discs must be inserted

in the centre of the player slot.

Press the "RPT" button to

repeat the play of the cur-

rent track. "RPT" appears

on the screen.

To exit this mode, press this button

again.

Ejecting a disc

Press this button to remove

the disc from the player.

The system automatically

switches to radio mode.

Random playing of a disc

Press the "RDM" button

to start random play of the

tracks on the disc. "RDM"

appears on the screen.

The "PHONE" is not operational at

present.

The functions setting mode is deacti-

Once ejected, if the compact disc is

not removed within ﬁfteen seconds, it

is reloaded into the player.

To exit this mode, press this button

again.

XI

vated after approximately 10 seconds

without any action.

172

A U D I O a n d T E L E M AT I C S

CD-TEXT DISPLAY

MP3/TAG ID3 CD

Playing the beginning of each track

The CD player and the CD changer are The CD player and the CD changer

compatible with the display of CD-Text are compatible with the playing of MP3

Press the "SCAN" button to

start playback of the ﬁrst ten

seconds of each track on

the disc. "SCAN" appears

on the screen and the corresponding

track number ﬂashes.

information.

ﬁles.

These must be recorded in ISO9660

Level 1/Level 2, Joliet or Romeo format

on CD ROMs, CD-Rs or CD-RWs.

The CDs can contain a maximum of

255 ﬁles and 100 folders on 16 levels.

Press the "DISP" button

several times in succession;

the CD-Text information ap-

pears in the following order:

To exit this mode, press this button again.

DISC NAME/TRACK NAME/NORMAL

DISPLAY MODE.

The Tag ID3 version 1 can be displayed

while playing MP3 ﬁles.

If the information exceeds

12 characters, press the

"PAGE" button to see the

rest.

In the case of compact discs contain-

ing both CD-DA and MP3 ﬁles, play

automatically begins with the CD-DA

ﬁles.

To switch play between the two types

of ﬁle, press the "CD" button for more

than two seconds until an audible

signal is heard.

On CD-R/RWs, the quality of the

playback sound depends on the en-

coding software, the burning device

and the burning speed used.

In the absence of CD-Text information

to be displayed, "NOTITLE" appears on

the screen.

While using these compact discs, the

"Repeat", Random play" and "Play-

ing of the beginning of the tracks"

functions are only applied to ﬁles of

the same format.

Selecting an MP3 folder

Turn the "FOLDER" dial

respectively to the right to

select a folder in ascending

order or to the left to select a

folder in descending order.

XI

173

A U D I O a n d T E L E M AT I C S

Repeating the tracks in a folder

Playing the beginning of each track

To deactivate this information, press

the "DISP" button again for more than

two seconds.

Press the "SCAN" button

to start playing the ﬁrst ten

seconds of each track in all

Press the "RPT" button for

more than two seconds to

repeat the playing of the

tracks contained in the cur-

rent folder. "D-RPT" appears in the

screen.

of the folders. "SCAN" ap-

If the information exceeds

12 characters, press the

"PAGE" button to see the

rest.

pears in the screen and the correspond-

ing track number ﬂashes.

To exit this mode, press this button

again.

To exit this mode, press this button

again.

In the absence of MP3 or Tag ID3 in-

formation to be displayed, "NOTITLE"

appears in the screen.

MP3/Tag ID3 display

Random playing of a folder

When play begins, "READING" appears

in the screen then disappears to make

way for the folder number, the track

number, the playing time and "MP3".

Press the "RDM" button to

start random playing of the

tracks in the current fold-

er. "RDM" appears in the

screen.

On CD-R/RWs, the quality of the

playing sound depends on the en-

coding software, the burning device

and the burning speed used.

Depending on the ﬂow chart of the

MP3 folders and ﬁles on the disc,

play may not begin immediately.

To exit this mode, press this button

again.

Press the "DISP" button sev-

eral times in succession; the

MP3 information appears in

the following order:

FOLDER NAME/TRACK NAME/NORMAL

DISPLAY MODE.

Random playing of a disc

Press the "RDM" button for

more than two seconds to

start random playing of the

Press the "DISP" button for

more than two seconds to

activate the Tag ID3 infor-

mation. "TAG" appears in

the screen.

tracks in all of the folders.

"D-RDM" appears in the screen.

To exit this mode, press this button

again.

Press the "DISP" button several times

in succession; the Tag ID3 information

appears in the following order:

ALBUM NAME/TRACK NAME/ARTIST

NAME/NORMAL DISPLAY MODE.

XI

174

A U D I O a n d T E L E M AT I C S

CD CHANGER

See also "CD-Text display" and "MP3/

Tag ID3 CD".

Loading all of the discs

Ejecting all of the discs

Press this button for more

than two seconds. The cur-

rent disc is ejected.

Press the "LOAD" button for

more than two seconds.

The changer selects an

empty slot number from the

Selecting changer mode

After inserting at least one disc, printed

face upwards, the changer starts auto-

matically.

Once this disc has been

removed, the next disc is ejected auto-

matically in its turn.

Repeat these steps until unloading is

complete.

lowest to the highest and switches to

waiting for loading mode.

"LOAD DISC N° (1-6)" appears on the

display; insert the disc in the corre-

sponding slot.

The changer automatically selects the

next empty slot number and returns to

waiting for loading mode.

Repeat these steps until loading is

complete. Play begins with the last disc

inserted.

If the changer already

contains a disc, press the

"CD" button.

"CD", the disc and track

numbers and the playing time appear

in the screen.

Once ejected, if the compact disc is

not removed within ﬁfteen seconds it

is re-loaded into the changer.

Loading a disc

The CD changer can hold up to 6 CDs.

Selecting a disc

Press the "LOAD" button

brieﬂy. "WAIT" appears on

the display.

Ejecting a disc

Press one of the "DISC" but-

tons several times in suc-

cession until you reach the

disc required. The symbol

of the disc selected appears

in the screen.

When the changer is ready,

the indicator lamp on the "LOAD" button

comes on and "LOAD DISC N° (1-6)"

appears in the screen.

Press this button brieﬂy to

remove the current disc

from the changer.

If several slots are empty, select one

using one of the "DISC" buttons.

Insert circular compact discs only.

8 cm compact discs cannot be

played by the changer.

XI

175

A U D I O a n d T E L E M AT I C S

Repeating a disc

Press the "RPT" button for

Playing of the beginning of each track

Audio CD

Fast search

Press the "SCAN" button

to start play of the ﬁrst ten

seconds of each track on

the disc. "SCAN" appears in

the screen and the corresponding track

number ﬂashes.

more than two seconds to

repeat the playing of the

tracks of the current disc.

Press and hold button "ꢂ"

or "ꢃ" to carry out a fast

backwards or forwards

search respectively.

"D-RPT" appears in the screen.

To exit this mode, press this button

again.

To exit this mode, press this button

again.

Play begins when the button is re-

leased.

Random playing of a disc

Selecting a track

Press the "RDM" button to

start random playing of the

tracks on the disc. "RDM"

appears in the screen.

Press button "ꢀ" or "ꢁ" to

select the previous track or

next track respectively.

On CD-R/RWs, the playback sound

quality depends on the encoding

software, the burning device and the

burning speed used.

To exit this mode, press this button

again.

Repeating a track

Press the "RPT" button to

repeat the playing of the cur-

rent track. "RPT" appears in

the screen.

Random playing on all of the discs

Press the "RDM" button for

more than two seconds to

start random playing of the

To exit this mode, press this button

again.

tracks on all of the discs.

"D-RDM" appears in the screen.

To exit this mode, press this button

again.

XI

176

A U D I O a n d T E L E M AT I C S

ERROR MESSAGES

If an error message appears on the screen, refer to the table below to ﬁnd out what it means and the solution to be applied

in order to rectify it.

TEXT

DESCRIPTION

SOLUTION

No disc present.

Disc not compatible.

NO DISC

Insert a disc.

Disc inserted incorrectly.

Disc with condensation.

Insert the disc with the printed face upwards.

Clean the dampness off the disc.

ERROR 01

ERROR 02

ERROR 03

ERROR HOT

ERROR

Disc dirty, scratched or distorted.

Excessive vehicle vibration.

Clean or replace the disc.

Try again when the vibration has stopped.

Error on insertion or ejection.

Playing head misaligned.

Eject the disc and insert it again. If it is not ejected,

have the audio equipment checked.

Triggering of the internal protection against high Wait approximately 30 minutes to allow the audio

temperatures.

system to cool.

Communication error between the audio system

and the external system.

External system supply error.

Consult a CITROËN dealer.

XI

177

A U D I O a n d T E L E M AT I C S

AUDIO-TELEMATIC SYSTEM

AUDIO: selection of Audio-video

(FM, CD, music server, ...) or Navi-

gation (map) display.

SCALE: changing the scale of the

map.

ENT: conﬁrms the choice of the

item selected on the screen.

For certain operations, conﬁrma-

tion is given by contact with the

touch screen.

VOL: adjustment of audio-video

volume.

POWER: audio system on/off

(only).

OPEN:tiltsthescreen

and permits access

to the CD/DVD. A

second press closes

the screen.

Scrolling the map displayed or

selection of an item.

Mute on/off.

Next or previous selection for:

-

a radio station,

an audio track (CD),

a chapter (DVD).

Setting the audio volume.

Move a ﬁnger over the screen to operate

the system.

Use the buttons offered on the screen.

Changing the audio-video source

(FM, CD, music server, ...).

For safety reasons, the driver

must only carry out operations

which require prolonged atten-

tion with the vehicle stationary.

!

XI

178

A U D I O a n d T E L E M AT I C S

DESCRIPTION OF THE CONTROLS - MENUS

MODE: Audio-video menu for:

INFO: Information menu for the

consultation or adjustment of cer-

tain settings for your vehicle.

-

radio,

audio, MP3 or WMA CD,

music server,

DVD.

SET: Settings menu for:

NAVI: display of the current location

on the map.

-

switching off the screen,

selecting the sound setting,

selecting the picture quality,

selecting the language, the time

zone or the units,

MENU: Navigation-guidance menu

for selecting:

-

a destination,

a point of interest (POI),

an advanced search by POI,

one of the 20 previous destinations,

an address stored in the ad-

dress book,

the return home,

-

selecting the size of the DVD

picture,

selecting the guidance voice,

the screen colour schemes or

display of the audio-video icon,

-

setting certain equipment avail-

able in your vehicle.

certain navigation settings,

a route demonstration.

XI

179

A U D I O a n d T E L E M AT I C S

NAVIGATION-GUIDANCE

GPS

What is the navigation system and

the GPS?

The satellite navigation system guides

What precautions should be

observed in order to make best use

of the system?

What is a point of interest

(POI)?

A point of interest (POI) is

the driver to the destination that he has Do not place anything on or near the

set in accordance with a chosen route. GPS aerial.

represented by an icon on

the map, it represents an

airport, a station, a town

hall, ...

Initially, it searches for the destination Do not use any digital communication

required by the user, then it calculates equipment (personal computers, etc.)

the route and ﬁnally it provides the vi- near the GPS aerial.

sual and audible guidance instructions.

Do not afﬁx any reﬂective ﬁlms or ﬁlms

containing carbon to the windows.

Up to 40 different icons may

be displayed (refer to the

section "Points of interest

icon").

The system's measurements may be

inaccurate if the vehicle is:

They are classiﬁed in

5 groups and identiﬁed by one colour

for each group:

-

in a tunnel or underground car park,

underneath a two-level motorway,

in an area with several very high

buildings,

surrounded by closely planted trees.

The GPS (Global Position-

ing System) consists of

several satellites distribut-

-

Shops, ﬁnance and businesses

(Green),

ed around the earth. They

-

Vehicles and travel (Dark blue),

Restaurants (Orange),

Public places and emergency ser-

vices (Brown),

Entertainment and attractions (Blue).

-

continuously transmit digi-

tal signals which travel at the speed of

light, on 2 different frequencies.

Depending on the vehicle's situation

and the reception of the GPS informa-

tion, the displayed information may dis-

appear from the screen temporarily.

At any given time, the system receives

its position in relation to the satellites

detected and the time of transmission

of the signal.

-

This enables the telematic unit to cal-

culate its position and therefore that of

the vehicle.

A repositioning process using the map

database stored on the hard disk allows

the vehicle to be positioned on the road

network, so improving the accuracy of

the vehicle location function.

XI

180

A U D I O a n d T E L E M AT I C S

Information displayed on the

map during navigation

J. Destination/intermediate destination

A. Manoeuvre icon: indicates whether

the driver should turn left or right at

the next junction indicated by the

guidance and the distance to this

junction.

information: indicates the distance

and the time remaining until the des-

tination or intermediate destination is

reached.

B. Guidance route: indicates the route

to the destination.

C. Vehicle marker: indicates the posi-

tion of the vehicle while driving.

D. TMC icon: displays trafﬁc infor-

mation such as trafﬁc jams, road

works, etc.

A

B

C

K1

K4

K2

K5

K3

When the icon is touched, detailed

TMC information can be viewed.

E. Orientation mark: indicates the ori-

D

entation of the map displayed.

F. Map scale: indicates the scale of

the map displayed.

G. Name of the street: indicates the

name of the current street.

H. Direction frame: displays the num-

ber of the next road or the name

of the next street which the driver

should turn into.

E

F

K.

Press for access to the Route

Menu in order to:

G

K1 - change the route in favour of

another making a detour through

a speciﬁed region,

K2 - change the position of the desti-

nation, add an intermediate des-

tination and change the route

calculation conditions,

Single map display.

I. Destination/intermediate destina-

tion icon: indicates the direction

of the destination or intermediate

destination.

H

K3 - display a route by various methods,

K4 - delete a route created,

K5 - search for points of interest (POI)

around the current location.

I

K

J

XI

Two-map display.

181

A U D I O a n d T E L E M AT I C S

Searching for a destination

using an address or points of

interest (POI)

A

- Select a location using the address or

street name of the destination. Select:

A1 - the country,

A1

A2

A2 - the city,

A3 - the street,

A4 - the house number,

A5 - the name of a junction,

A3

A4

A5

A6

A6 - to select the search using either a number

or a junction.

B

- Select a location using the name of a

point of interest (POI).

Select:

B1

B2

A

B

C

B1 - the country,

B2 - the city,

B3 - the name of a stored POI,

B4 - a POI category (airport, bowling alley,

bus station, car park, service station,

hotel, cinema, ...),

B3

B4

B5

B5 - a detailed POI list.

C

- Select a location using an advanced

search based on a POI:

C1 - around the current location,

C2 - on the current route,

C3 - in the vicinity of the destination,

C4 - on a chosen street,

C5 - along a motorway or in the vicinity of

the exit,

C6 - by scrolling the map,

C1

C4

C7

C2

C5

C8

C3

C6

C7 - taking the point of departure of the current

route,

C8 - specifying the latitude/longitude coordi-

nates.

You have a maximum of 100 points of interest (POI) within a radius

of approximately 60 miles (100 km).

XI

182

A U D I O a n d T E L E M AT I C S

Searching using previous destinations, a stored address or a return home

D

- Select a location using one of the

20 previous destinations.

E

- Select a location using an ad-

dress stored in the address book.

Sort by:

E1

E2

E3

E1 - Icon,

E2 - Name,

E3 - Date.

D

E

F

- Select a return home directly.

Press YES to store your home

address (the ﬁrst time).

XI

183

A U D I O a n d T E L E M AT I C S

G

- Select the settings of functions

linked with the navigation to:

Navigation settings and

information (1/2)

G1 - set the screen display parameters

such as:

- display 1 or 2 maps,

G1

G4

G2

G5

G3

- display or do not display the POIs

on the map, display selected icons,

- change the colours of the map,

- display or do not display the name

of the current street.

- display or do not display the ad-

dress of the current street.

G2 - set route conditions, such as,

- avoiding trafﬁc problems,

- avoiding selected areas,

- avoiding roads at a certain time.

G3 - set the route guidance mode and

the displaying of the results of the

route search,

G4 - save, change or delete a location

in the address book,

G

H

G5 - display and select the trafﬁc in-

formation such as trafﬁc jams or

road works by selecting dynamic

guidance.

XI

A U D I O a n d T E L E M AT I C S

Navigation settings and

information (2/2)

H

- Select basic information relating

to the navigation as well as a pre-

set route demonstration to:

H1 - choose to divert your route to

avoid certain areas,

H2 - select a location using an ad-

vanced search based on a POI

along a motorway or in the vicinity

of the motorway exit,

H3 - start/stop the demonstration,

H4 - recall a stored map screen.

H1

H3

H2

H4

H

XI

A U D I O a n d T E L E M AT I C S

Selecting points of interest (POI)

icons displayed on the map

General

Town centre

Public places and emergency

services (Brown)

Town Hall

Locality

Community centre

Convention/exhibition centre

Hospital

Shops, ﬁnance and businesses (Green)

Major companies

Shopping centre

University/college

You can select up to 40 types of point

of interest icon which are displayed on

your map screen.

Entertainment and attractions (Blue)

Vehicles and travel (Dark blue)

Press the MENU button then [Navigation

Settings].

Theme park

Bowling alley

Casino

CITROËN

Airport

Bus stop

Cinema

Vehicle hire

Golf course

Suburban station/station

Ferry terminal

Hotel

Historical monument

Skating rink

Marina

Park and ride

Car park (press +)

Service station

Rest area

Press [Screen] then [Select] on the POI

line.

Press [4] which is displayed.

Museum

Flying club

Leisure area

Ski station

Toll booth

Sports centre

Theatre/opera

Tourist attraction

Vineyard/wine and spirit store

Tourist information

Railway station

Press each POI required.

Restaurant (Orange)

At each contact with a POI, the display

of [α] changes (α = the POI will be dis-

played on the screen).

XI

Night life/night club

Restaurant

186

A U D I O a n d T E L E M AT I C S

Entering an address and starting guidance (1/2)

Press

Explanations

Result

Press the MENU button.

Press [Address/Junction].

Press [Country] and enter the name of the country using the touch keypad.

When a character of the name of the country is entered, if 5 countries

or fewer are recognised, you can select a country from a list which is

displayed or press [List].

You can select one of the 5 most recently selected countries by

pressing [Last 5] on the "Country" line.

Press [City] then [Keyword] and enter the name of the city using the touch

keypad.

When a character of the name of the city is entered, if 5 cities or fewer are

recognised, you can select a city from a list which is displayed or press

[List].

You can select a city using the post code.

Press [Post Code] and enter the number.

XI

You can select one of the 5 most recently selected cities by

pressing [Last 5] on the "City" line.

187

A U D I O a n d T E L E M AT I C S

Entering an address and starting guidance (2/2)

Press

Explanations

Result

Press [Street] and enter the name of a street using the touch keypad.

When a character of the name of the street is entered, if 5 streets or fewer

are recognised, you can select a street from a list which is displayed or

press [List].

Press [House #] and enter the number of the house using the touch

keypad.

You can enter the name of a junction instead of the number

of the street. Press [Junction] and select the name from a

list which is displayed.

This is the result once all of the information has been entered:

/

If you agree with the information press [Set], otherwise press one of the

buttons to correct.

XI

Press [Start] to start the navigation.

188

A U D I O a n d T E L E M AT I C S

Traffic information

During navigation, the system gives you

trafﬁc information received in real time.

The system can then suggest a detour

route, if dynamic guidance has been

activated by pressing MENU, [Naviga-

tion settings] then [TMC].

Press

Explanations

Result

Press [Route].

Press [Display new route].

The system offers a detour route (dynamic guidance).

Press [Back] and enter to return to the previous screen.

The system asks you to conﬁrm or not the new route.

Press [Yes] to conﬁrm your choice. The system displays the name of the

new route.

Press [No] to not register the route.

XI

189

A U D I O a n d T E L E M AT I C S

AUDIO-VIDEO

What is RDS?

RDS station following

Trafﬁc information function

Radio Data System (RDS) func-

tion on the FM waveband permits:

tuning to the same station while

travelling through different regions

(if the transmitters of this station

cover the area through which you

are travelling),

temporary tuning to trafﬁc informa-

tion announcements,

display of the name of the station,

etc...

Your radio automatically checks

and selects the best frequency

for the radio station to which it is

The Trafﬁc Program (TP) func-

tion permits automatic and

temporary switching to an FM

station broadcasting trafﬁc infor-

mation.

-

tuned (if the station broadcasts on sev-

eral transmitters or frequencies).

The frequency of a radio station covers

approximately 30 miles (50 km). The

change from one frequency to another

explains the loss of reception during a

journey.

If the station to which you are listening

does not have several frequencies in

the region in which you are currently lo-

cated, you can deactivate the automatic

frequency following.

The radio station or the source that you

are listening to at this point is paused.

Once the trafﬁc information has ended,

the system switches back to the radio

station or the source that you were lis-

tening to initially.

-

Most FM stations use RDS.

These stations transmit non-audible

data in addition to their programmes.

The data transmitted in this way allows

you access to various functions, mainly

displaying of the name of the station,

temporary tuning to trafﬁc information

announcements or automatic station

following.

RDS allows you to continue listening to the

same station by means of the frequency

following. However, in certain conditions,

this RDS frequency following cannot be

provided throughout the country. Radio

stations do not cover the whole country,

which explains the loss of reception of the

station during a journey.

Regional following mode

Programme types

Some stations are organised in

a network.

In different regions, they broadcast dif-

ferent or shared programmes depend-

ing on the time of day.

Some stations offer the option

of listening to a themed type of

programme as a priority, select-

ed from the list available below:

NEWS, AFFAIRS, INFOS, SPORT,

EDUCATE,

DRAMA,

CULTURE,

You can follow:

SCIENCE, VARIED, POP M, ROCK M,

EASY M, LIGHT M, CLASSICS, OTHER

M, WEATHER, FINANCE, CHILDREN,

SOCIAL, RELIGION, PHONE IN, TRAVEL,

LEISURE, JAZZ, COUNTRY, NATION M,

OLDIES, FOLK M, DOCUMENT.

-

a regional station only,

the entire network, with the possibility

that you will be listening to a different

programme.

XI

190

A U D I O a n d T E L E M AT I C S

Information displayed in Radio mode

A

B

C

D

E

F

G. To receive the stored station.

Press and hold to store a station.

H. To change the frequency step by

step.

N

M

L

Press and hold for scrolling of the

frequency.

G

I. To search for currently broadcasting

stations which can be received in

the current location, until a station is

found.

K

J

I

H

J. To display the programme types

pre-setting screen, e.g.: sport, rock,

classical, news, ... Press PTY again

to exit.

K. Press this button to display the

secondary menu.

L. REG is displayed during the recep-

tion of regional frequencies data.

M. RDS is displayed during the reception

of RDS data.

A. A pre-set number is displayed when

a pre-set channel has been selected.

B. The name of the station is displayed

during the reception of RDS data. If

the name has not been transmitted,

the frequency is displayed.

C. Stereo is displayed when a stereo

transmission is received.

D. AF is displayed when the AF control

function is activated.

N. TP is displayed when the trafﬁc

information is in standby mode.

E. PTY (programme type) is displayed

if the RDS data received is dis-

played.

TRAFINF is displayed, during an

interruption, for trafﬁc information.

ALARM is displayed, during an

interruption, for urgent information.

F. Display of 6 pre-set stored stations.

XI

191

A U D I O a n d T E L E M AT I C S

Radio, selecting an FM station and storing

Press

Explanations

Result

Press the MODE button.

Press FM. By default the screen shows the FM1 stations.

Press [ꢀ Tune] to decrease the frequency or [Tune ꢁ] to increase the

frequency. The frequency is changed in steps of 0.1 MHz.

Continue to press to tune to a station automatically.

You can select [ꢄSeek] or [Seekꢅ] to start a continuous

search until the stations which can be received in the current

location are detected.

You can also start a search by type of programme by pressing

[PTY].

Once the frequency has been selected, a long press on the station (e.g. 3)

will store it.

The name of the station is displayed if it is available.

XI

You can start automatic storing on FM3 for 6 stations, which

can be received in the current location, by pressing [^] then

[Auto-Store].

192

A U D I O a n d T E L E M AT I C S

Radio, RDS settings

Press

Explanations

Result

Press the MODE button.

Press FM. By default the screen shows the stations on FM1.

Press [^].

Press [RDS Settings].

Press [On] or [Off] to activate or deactivate the functions:

-

AF: automatic search for the best frequency,

REG: switch to the regional frequencies,

TP: automatic selection of stations broadcasting trafﬁc information.

XI

193

A U D I O a n d T E L E M AT I C S

CD player

Your Audio-Telematic system allows

you to listen to audio CDs (CDDA, CD-

Text, CD-R/RW) or MP3 and WMA CDs.

Switching off the engine or removing

the CD during recording will result in the

tracks being faulty.

The operation of the navigation system

may slow down during recording.

The recording speed may be slower

than 4x due to the processing load on

the equipment or the condition of the

audio CD.

If jumps or other errors occur, return to

the beginning of the track and start the

recording again.

What is the Gracenote CDDB?

The title information for the

track currently being played

can be obtained from the

"Gracenote CDDB" database

stored on the hard disk.

Playing an audio CD

When the audio CD is

inserted in the player,

playing of the tracks is

automatic and they can

be recorded onto the

hard disk.

The Gracenote company uses this

standard to identify the music and the

associated information such as:

-

the title of the album,

the name of the artist,

the title of the tracks,

the genre, ...

Simultaneous access to the music rec-

ognition service "Gracenote CDDB" on

the hard disk permits display of the title

information.

Even if there is no gap between the

tracks on the CD, a brief silence be-

tween tracks is stored on the hard disk.

For further details, consult the site:

The Gracenote CDDB database incor-

porated in this equipment cannot guar-

antee the content of the data 100 %.

You can update this database using a

DVD sold separately.

Recording onto the music server

The tracks of audio CDs (not

MP3/WMA) can be recorded

onto the hard disk at approximately

4x speed (e.g.: 60 minutes converted

to 15 minutes) and stored on the music

server.

The sounds recorded may be altered

by the noise present and the quality of

the sound may differ from the original.

The tracks recorded on the music server

cannot be reproduced on another me-

dium (CD-R/RW, HDD, etc...).

Copyright

Your Audio equipment may allow you

to listen to music which is usually pro-

tected by copyright in accordance with

current national and international stan-

dards. Please consult these standards

and comply with them.

Previously recorded tracks cannot be

recorded again from the same CD.

XI

194

A U D I O a n d T E L E M AT I C S

Information displayed in CD mode and recording a CD

A

B

C

H. Displays the number and the name of

the track. While driving, they are not

available and cannot be selected.

I. To display the secondary menu.

J. Move the cursor onto the track cur-

rently being played.

D

E

K

J

F

K. The number and the name of the

track currently being played are dis-

played.

I

H

G

L

A. The name of the album is displayed

for the track currently being played.

B. The name of the artist is displayed

for the album currently being played.

M

C. The playing time of the track currently

being played is displayed.

D. The playing mode currently selected

is displayed.

E. Position of the cursor and total number

of tracks on the album.

The CD button is only active if the player

contains a CD.

L. During recording, this symbol is

displayed in red and it switches off

when all recording operations are

complete. The number indicates the

percentage of the total number of

tracks on the CD already recorded

onto the hard disc. 00 % when only

one track has been recorded.

F. Displays the item currently selected.

G. To scroll up or down through the

tracks.

Press and hold for fast backwards

or forwards playing of a track.

M. The tracks which have not been

recorded are displayed in blue.

No symbol is displayed for tracks

which have been recorded.

XI

Press Open to return the screen to the

vertical position.

195

A U D I O a n d T E L E M AT I C S

Playing a CD

Press

Explanations

Result

Press the MODE button then CD, if the player already contains a CD.

Otherwise, insert a CD in the player, play begins automatically.

Selecting a track

Press [ꢀTrack] to select the previous track or return to the beginning of

the track currently being played.

Press and hold for fast backwards play.

Press [Track ꢁ] to select the next track.

Press and hold for fast forwards play.

Changing the play mode

Press [^] to access the secondary menu.

Press [Repeat] to play the track in a loop (repetition).

Press [^] then [Repeat] to stop.

Press [Scan] to play the beginning of each track for approximately

9 seconds (scan). Press [^] then [Scan] to stop or press the current track

(during the 9 seconds) and play begins.

XI

Press [Random] to play the tracks in random order. Press [^] then

[Random] to stop.

196

A U D I O a n d T E L E M AT I C S

Recording a CD onto the music server (1/3)

Press

Explanations

Result

Automatic recording of all of the tracks

All of the tracks are recorded automatically when a CD is inserted.

This automatic recording is programmed by default on leaving the factory.

If you have changed the recording mode (manual or ﬁrst track), while a

CD is being played press [^] to access to secondary menu.

Press [REC. Setting].

Press [Auto REC.] and conﬁrm by pressing [Back].

Next, eject the CD currently being played then insert a CD and the

recording of all of the tracks begins.

If you wish to record the CD which is currently being played, press [^] to

access the secondary menu and press [REC. Start].

If another track (already recorded) is selected during recording, the

recording continues and the new track selected is played.

If another track (not recorded) is selected, the recording which is in

progress stops and the recording of the new track selected begins. This

track is played during recording.

XI

A U D I O a n d T E L E M AT I C S

Recording a CD onto the music server (2/3)

Press

Explanations

Result

Manual recording of individual tracks

You can record the tracks manually, one by one.

After inserting a CD and while it is being played, press [^] to access the

secondary menu.

Press [REC. Setting].

Press [Manual REC.] and conﬁrm by pressing [Back].

Once the manual programming has been carried out, select the track to

be recorded then press [^].

Press [REC. Start], the recording of the track selected begins.

If another track is selected during recording, the recording stops and the new

track selected is played.

XI

A U D I O a n d T E L E M AT I C S

Recording a CD onto the music server (3/3)

Press

Explanations

Result

Automatic recording of the ﬁrst track

You can programme the automatic recording of the ﬁrst track when a CD

is inserted.

After inserting a CD and while it is being played, press [^] to access the

secondary menu.

Press [REC. Setting] then [Single REC.] and conﬁrm by pressing [Back].

Next, eject the CD which is currently being played then insert a CD and

the recording of the ﬁrst track begins.

If you wish to record the ﬁrst track of the CD which is currently being

played, press [^] to access the secondary menu and press [REC. Start].

If another track is selected during recording, the recording stops and the

track selected is played.

Stopping automatic or manual recording

During the recording of a CD or of a track on a CD, press [^] to access the

secondary menu.

XI

Press [REC. Stop], the recording stops.

199

A U D I O a n d T E L E M AT I C S

"Original" group, number 01:

This is the location of

the original playlist cre-

ated automatically (not manual) when a

track of an audio CD is recorded.

It is not possible to change its name or

delete it.

You can record up to 9999 playlists in

this group.

"Original Playlist" lists:

These are original play

General notes on the Music Server

What is the music server?

Your Audio-Telematic system allows

you to copy audio CDs onto a music

server, up to 2,500 songs on a 10 Gb

hard disk.

The tracks on audio CDs (not MP3 or

WMA) can be recorded onto the hard

disk at approximately 4x speed and

stored on the music server.

lists created automatical-

ly (not manual) when an

audio CD is recorded.

The lists and the artists can be renamed

or deleted. The genres can also be set.

Refer to the "Recording a CD" section.

The music server then allows you to

manage groups and lists of tracks.

"My Favorites" list:

This is the location for

storing your favourite

tracks.

"My Best" group, number 02:

This is the location of the

playlists, etc... created

automatically from the information read

on the music server.

They can be deleted from the list and

the order in which they are played can

be changed.

"My Frequency" list:

It is not possible to change its name or

delete it.

The groups "My Favorites" and "My

Frequency" are stored here.

This is the location of

the playlists used most

frequently from the original list.

It is not possible to add tracks or change

their order.

"User Playlist" list:

"New Group" group for the user,

numbers 03 to 99:

This is the location of a

playlist of tracks selected

by the user from the original list.

If you delete a track from the original

list, it will be deleted from the user list.

The list and the artist can be renamed

or deleted.

It is possible to add tracks or change

their order.

This is the location of

the user's playlists.

You can record up to 9999 playlists in

this group.

The group can be created, renamed or

deleted.

XI

200

A U D I O a n d T E L E M AT I C S

Information displayed in Music Server mode

A

B

C

D

G. To display the list of groups, the

playlist and the list of tracks.

H. To scroll up or down through the

tracks.

E

F

Press and hold for fast backwards

or forwards playing of a track.

I. To scroll up or down through the

G

M

L

playlists.

J. Group lists: number and name of

the group.

K

J

I

H

Playlists: number and name of the

playlist.

A. The number and the name of the

track currently being played are dis-

played.

B. The number and the name of the

playlist currently being played are

displayed.

Track lists: number and name of the

track.

K. To display the secondary menu.

L. Displays the item currently selected.

M. Move the cursor onto the track cur-

rently being played.

C. The name of the artist is displayed

for the playlist currently being played.

D. The playing time of the track cur-

rently being played is displayed.

E. The playing mode currently selected

is displayed.

F. Group lists: position of the cursor

and total number of groups.

Playlists: position of the cursor and

total number of playlists.

Track lists: position of the cursor

and total number of tracks.

XI

201

A U D I O a n d T E L E M AT I C S

Playing a track or a playlist on the Music Server

Press

Explanations

Result

Press the MODE button then Music Server.

The playlists are played in a loop.

The server can play a track while recording another track from a CD. You

must wait until recording is complete before playing the recorded track.

Selecting a track

Press [ꢀTrack] to select the previous track or return to the beginning of

the track currently being played.

Press and hold for fast backwards play.

Press [Track ꢁ] to select the next track.

Press and hold for fast forwards play.

Selecting a playlist

Press [ꢄPlaylist] to select the previous playlist.

Press [Playlistꢅ] to select the next playlist.

Press these buttons to switch between groups, playlists and

tracks.

You cannot switch directly from groups to tracks.

XI

202

A U D I O a n d T E L E M AT I C S

Creating a group and a playlist on the Music Server

Press

Explanations

Result

Creating a group

Press [^] to access the secondary menu.

Press [New Group], enter the name of the group and press [SET].

The group is stored on the server.

Creating a playlist

Press [^] to access the secondary menu then press [Function Settings].

Press [New Playlist].

Select the group to which the playlist is to be attached. The group must

be created ﬁrst.

Enter the name of the playlist and conﬁrm by pressing [SET].

XI

Then select the search method attached to this new list (either from the

list or by conditions).

The list is stored on the server.

203

A U D I O a n d T E L E M AT I C S

General notes on MP3/WMA CDs

Playing an MP3/WMA CD

What is the MP3/WMA ﬁle format?

Acceptance of the ﬁles

When the MP3/WMA CD is MP3 is the abbreviation of MPEG-1 Some blank CDs may not be played

inserted in the player, play- Audio Layer 3 and MPG is the abbrevia- by your equipment (quality, recording

ing of the tracks is automatic. tion of Motion Pictures Experts Group, a speed...).

digital video data compression standard

The tracks cannot be recorded

onto the music server.

When you burn a CD-R or CD-RW,

used on media such as video CDs.

The MP3 compression reduces the burning standard.

number of bytes in a song by eliminating

the long sound waves in the range of fre-

quencies which are imperceptible to the

human ear, so producing high quality au-

dio ﬁles with a low volume of data.

This compression divides the size of

the content of a conventional audio CD

by approximately 10, which means that

the content of 10 audio CDs can be

recorded onto a single CD-R or CD-RW.

select the ISO 9660 level 1.2 or Joliet

You can play CDs with up to 8 levels,

255 folders and 400 ﬁles maximum.

To obtain the best acoustic quality pos-

sible, select the lowest burning speed.

The MPEG1 and MPEG2 standards

are accepted.

Transmission speeds between 32 and

320 kbits/s and scans between 16 kHz

and 48 kHz are accepted.

To display the title information (the name

of the artist, the title of the album, etc...),

the information contained in the ID3 Tags

or the WMA Tags must be included in the

MP3/WMA ﬁles burned onto the disc.

WMA is the abbreviation of Windows

Media Audio, another audio data com-

pression standard offered by Microsoft.

It can be used to create and save audio

ﬁles at a compression rate higher than

that of the MP3 format.

Windows Media and Microsoft Corpo-

ration are trademarks registered in the

United States and/or other countries.

Copyright

Your Audio equipment may allow you

to listen to music which is usually pro-

tected by copyright in accordance with

current national and international stan-

dards. Please consult these standards

and comply with them.

XI

A U D I O a n d T E L E M AT I C S

Information displayed in MP3/WMA CD mode

A

B

C

D

I. To scroll up or down through the

tracks.

E

F

N

Press and hold for fast backwards

or forwards playing of a track.

J. To scroll up or down through the

G

folders.

M

K. Displays the folder number and the

folder name. Plus the lists and num-

bers of tracks and the name of the

ﬁle (without extension).

H

L. To display the secondary menu.

M. Move the cursor onto the track cur-

L

K

J

I

rently being played.

N. Displays the type of medium, MP3

or WMA.

A. The number and the name of the track

currently being played are displayed.

B. The name of the album/folder is dis-

played for the track currently being

played.

C. The name of the artist is displayed

for the track currently being played.

D. The playing time of the current track

is displayed.

E. The playing mode currently selected

is displayed.

The CD button is only active if the player

contains a CD.

F. Position of the cursor and total num-

ber of folders or tracks on the current

level.

G. To display the list of folders of a higher

level.

H. Displays the item currently selected.

Press Open to return the screen to the

vertical position.

XI

205

A U D I O a n d T E L E M AT I C S

Playing an MP3/WMA CD (1/2)

Press

Explanations

Result

Press the MODE button then CD, if the player already contains a CD.

Otherwise, insert a CD in the player, play begins automatically.

Moving around the folders

You can move by one level at a time.

Press on the name of a folder and at each press the list of folders of the

level below is displayed.

These displays indicate the current level:

CD: level 0, folder below: level, folder below that, level 2, etc...

Up to 8 levels maximum.

Press on the folder above to move up and/or select a level.

Selecting a folder

Press [ꢄFolder] to select the previous folder.

XI

Press [Folderꢅ] to select the next folder.

206

A U D I O a n d T E L E M AT I C S

Playing an MP3/WMA CD (2/2)

Press

Explanations

Result

Selecting a track

Press [ꢀTrack] to select the previous track or return to the beginning of

the track currently being played.

Press and hold for fast backwards play.

Press [Track ꢁ] to select the next track.

Press and hold for fast forwards play.

Changing the playing mode

Press [^] to access the secondary menu.

Press [Repeat] to play the track selected in a loop (repetition).

Press [Repeat] again to play all of the tracks in the selected folder in a loop.

Press again to stop.

Press [Scan] to play the beginning of each track in each folder for

approximately 10 seconds (scanning).

Press [Scan] again the play the beginning of each track in the selected

folder in a loop.

Press again to stop or press on the current track (during the 10 seconds)

and play begins.

Press [Random] to play all of the tracks in the selected folder in random

order.

Press [Random] again to play all of the tracks on the CD in random order.

Press again to stop.

XI

207

A U D I O a n d T E L E M AT I C S

DVD MODE

Information displayed in DVD

mode

A

B

C

D

E

K. To display the DVD title menu.

L. To scroll up or down through the

chapters.

Press and hold for fast backwards

or forwards play.

F

G

H

I

R

Q

P

M. To scroll up or down through the titles.

N. To enter a title or chapter number.

O. To change the angle.

O

N

J

P. To change the language of the sub-

titles.

M

L

K

Q. To change the language.

R. To select a chapter or title or specify

a number.

A. This icon is displayed when the opera-

tion requested cannot be carried out.

B. The number of the chapter currently

being played is displayed.

C. The number of the title currently

being played is displayed.

D. Symbols display the current status

of the player.

E. The playing time is displayed.

F. To resume normal play when play is

paused or during slow-motion play.

G. To stop play temporarily.

The DVD button is only active if the

player contains a DVD.

H. To stop play. Press the screen to

access the menu.

I. For slow-motion play.

J. To play the previously selected zone

on the disc.

For safety reasons, the video

is not displayed while driving,

however the audio can be

played.

!

Press Open to return the screen to the

vertical position.

To display the picture and watch a

DVD, park the vehicle in a safe place.

XI

208

A U D I O a n d T E L E M AT I C S

Playing a DVD

Press

Explanations

Result

Press the MODE button then DVD, if the player already contains a DVD.

Otherwise, insert a DVD in the player, the picture is displayed

automatically. Press the screen to access the menus.

While driving, only the soundtrack is played and no picture is displayed.

Selecting a chapter

Press [ꢀChapter] to select the previous chapter or return to the beginning

of the chapter currently being played.

Press and hold for fast backwards play.

Press [Chapter ꢁ] to select the next chapter.

Press and hold for fast forwards play.

Selecting a title

Press [ꢄTitle] to select the previous title.

XI

Press [Titleꢅ] to select the next title.

209

A U D I O a n d T E L E M AT I C S

SETTINGS

A

- Choose to switch off the display.

To switch it back on, touch the

screen or press any button.

Display, sound, picture

B

- Choose the settings of the sound

in the vehicle, if an audio source

is selected (FM, CD, ...), for:

B1 - the sound distribution or the volume

such as the front-rear balance, the

bass, the medium, the treble, the

volume adjustment in relation to the

vehicle speed,

B2 - the type of music (with surround

option) such as classic, jazz, pop,

rock, hip hop, country, normal, ...

A

B

C

B1

B2

B3

B3 - the sound ﬁeld (with surround op-

tion) such as stage, live, hall, nor-

mal, ...

C - Choose the quality of the picture for:

C1 - the colour (when playing DVDs),

C2 - the intensity of the colours (when

playing DVDs),

C3 - the brightness,

C4 - the contrast,

C5 - the level of black.

C1

C2

C3

C4

C5

XI

210

A U D I O a n d T E L E M AT I C S

Time and date, language, unit,

picture size

D

- Choose the base settings of the sys-

tem for:

D1

D3

D2

D4

D1 - setting of the time by the RDS signal,

time zone, summer time,

D2 - the language (English, Français,

Deutsch, Nederlands, Portuguese,

Español, Svenska, Italiano, Dansk),

D3 - the units for calculation of the dis-

tances (km or miles and °C or °F),

D4 - other settings such as:

- the voice guidance volume,

- the type of voice guidance voice

(female or male),

- the volume of the operation bleeps

(1 to 3 and 0=no bleep),

- the type of inputting keypad (alpha-

bet or PC),

D

E

- the range of menu colours (red or

blue),

- the displaying or not of the audio

playing icons on the map screen,

- the reinitialisation of the vehicle sensor,

- the interruption or not of the display

when the air conditioning is used.

E

- Choose the size of the DVD picture for:

E1 - normal 4/3,

E2 - extends the picture evenly to the right

and to the left in wide screen mode,

E3 - extends the right and left parts only

leaving the centre as it stands in

wide screen mode,

E4 - enlarges the picture in 4/3 format.

The top and the bottom are outside

the frame.

XI

E1

E2

E3

E4

211

A U D I O a n d T E L E M AT I C S

Equipment, contrast, traffic information (TP)

F

- Choose to adjust or set the param-

eters of certain equipment offered

in your vehicle (e.g.: unfolding/

folding of the mirrors, closing the

windows on locking, timing and

sensitivity of the automatic light-

ing, direction indicators motorway

function, ...):

F1

F2

F3

F1 - to scroll up the list,

F2 - o scroll down the list,

F3 - to reinitialise all of the settings

(manufacturer's settings).

Press each setting to select or

change the parameters.

F

G

H

-

Choose to adjust the contrast of the

display in relation to the ambient

light level (day, night or automatic).

H

- Choose to activate or deactivate

the trafﬁc information (TP).

XI

212

A U D I O a n d T E L E M AT I C S

INFORMATION

System version, satellite

A

- Consult the system information:

A1 - the software version,

A2 - the map data version,

A3 - the system information database

version.

A1

A2

A3

To update the versions, insert

the DVD containing the new data

and follow the instructions on the

screen.

B

- Consult the GPS information:

B2

B1

B1 - the satellite positions diagram

with the direction of movement of

the vehicle. Plus the position of

the satellite signal receivers,

B2 - the name of the current location,

B3 - the longitude and latitude of the

current location,

A

B

B4

B5

B3

B6

B7

B8

B4 - the position measurement status

(2D=3 satellites or fewer, 3D=4

satellites or more),

B5 - the number of receiving satellites,

B6 - to have north at the top of the map,

B7 - to have the direction of the ve-

hicle at the top of the map,

B8 - to pivot the map from overhead

or change the angle of the map.

XI

213

A U D I O a n d T E L E M AT I C S

Calendar, trip

C

- Make a note on the calendar of

special days, birthdays, ...

Use the arrows to ﬁnd a date and

press directly on the day required

to enter the event.

D - Consult the driving information:

D1 - the average speed,

D2 - the average fuel consumption,

D3 - the current fuel consumption,

D4 - for speed and fuel consumption

graphs in 5 minute intervals,

D1

D2

D3

C

D5 - choose an automatic reinitiali-

sation (key at off for more than

4 hours) or manual reinitialisation

(press [Reset]),

D4

D5

D

D6 - the distance which can still be

travelled (in relation to the fuel re-

maining and the recent average

consumption),

D6

D7

D8

D7 - the distance travelled since the

fuel tank was last ﬁlled (press

[Refuel] to reinitialise),

D7

D8 - the driving time (duration be-

tween the key being turned to on

then to off).

These double arrows permit

access to the driving infor-

mation screen, previous or

next.

D9

D10

D11

D12

- press [Start] to measure interme-

diate times with:

D9 - the duration,

D10 - the distance,

D11 - the speed,

D12 - the fuel consumption.

XI

214

A U D I O a n d T E L E M AT I C S

Environment, air conditioning,

telephone

E

E1 - the altitude,

E2 - the atmospheric pressure,

E3 - the ambient temperature. The ice

symbol ﬂashes if there is a risk

of ice.

-

Consult the environment information:

E1

E2

E3

F

- Consult the air conditioning con-

ditions:

F1 - the fan speed indicator,

F3

F4

F5

F2 - the air selection indicator,

F3 - the windscreen demisting indicator,

F4 - the air conditioning indicator,

F5 - the rear screen demisting indicator,

F6 - the AUTO mode indicator.

F6

E

F

F1

F2

G

- Make and receive telephone calls:

G1 - enter the telephone number,

G2 - delete a character,

G3 - make the call.

G1

G2

G3

Refer to the hands-free telephone

section to connect your Bluetooth^®

mobile telephone.

XI

215

A U D I O a n d T E L E M AT I C S

HANDS-FREE TELEPHONE

General notes

What is the Bluetooth® hands-free telephone with voice

recognition?

The system uses wireless communication technology referred to as You can make telephone calls using

Bluetooth® which allows you to make hands-free telephone calls in a microphone, located in the courtesy

your vehicle via your Bluetooth® compatible mobile telephone.

lamp making use of the steering mount-

ed controls or by the voice recognition

function using voice commands. Five

languages are available: English (by

default), Spanish, French, German and

Italian.

Increase audio volume.

Audio system on/off.

Decrease audio volume.

PICK UP

Press to answer an incoming call.

If a second incoming call is received,

press this button to place the ﬁrst call on

hold and speak to the second caller.

In this case, a brief press switches be-

tween callers.

To establish a three-way conversation,

press the SPEAK button to switch to

voice recognition mode and say "In-

corporate the call".

SPEAK

Pressing activates the voice recognition (“Listening” is displayed).

During voice recognition, a brief press pauses this recognition.

An extended press deactivates the recognition.

A brief press will activate the recognition even if a telephone call is

progress.

HANG UP

Press to reject an incoming call.

During a call, pressing ends this call.

XI

216

A U D I O a n d T E L E M AT I C S

Changing the language,

programming the voice

Changing the language of the voice

commands

By default, the recognition system is in ming function to create a voice model

Programming the user's voice

You can use the user's voice program-

5 - The system says the ﬁrst of 45 typical

phrases.

6 - Repeat each phrase in the

table on the next page.

English.

for one person per language.

The characteristics of your voice and

your pronunciation are recorded in this

model for improved voice recognition.

1 - Press the SPEAK button.

The system records your voice and

moves on to the recording of the next

command.

Continue the process until all of the

phrases have been recorded.

It is essential that the vehicle is parked

in a safe place, with the parking brake

applied.

2 - Say "Setup".

Switch off your telephone during the

process to avoid any interruption.

3 - Say "Language".

7 - After reading all the voice com-

mands, the system says "The word

enrolment is complete" and ends the

process.

4 - The system says "Select a language:

English, Spanish, French, German or

Italian".

5 - Say the language of your

choice in English, example:

say "French" for French.

6 - The system then says "French se-

lected. Is this correct?"

If you do not start the program-

ming process within approximately

3 minutes after pressing the SPEAK

button, the process is cancelled.

If you press the SPEAK button with-

in 5 seconds following the reading of

a voice command, the recording of

this command is repeated.

1 - Press the SPEAK button.

2 - Say "Word training".

7 - Say "Yes" to start the change

of language process or say

"No" to return to steps 4 to 7.

3 - An explanation message is given.

8 - The system repeats the language

chosen and completes the change

of language process.

4 - When you are ready to start,

press and hold the SPEAK

button.

XI

217

A U D I O a n d T E L E M AT I C S

Training voice commands

1

2

3

4

5

6

7

8

9

# 790 (for # = "Hash")

* 671 (for * = "Star")

212 - 4 903

16 55 66 77 88 99

17 44 33 22 11 00

18 Call 293 - 5804

19 Call * 350

31 Home, Work, Mobile, Pager

32 List of names

33 No

235 - 3 494

34 Phone book: Delete

35 Phone book: New entry

36 Previous

315 - 5 657

20 Call 1 (234) 567 - 8 901

21 Dial 639 - 1542

22 Dial # 780

456 - 7 930

793 - 5 462

37 Phone book: Clear all

38 Redial

794 - 1 826

23 Dial (987) 654 - 3210

24 1058# 3794# Send

25 27643# 4321# Send

26 Cancel

826 - 3 145

39 Repeat the training

40 Conﬁgure the conﬁrmation requests

41 Conﬁgure the language

42 Conﬁgure the matching options

43 Match a telephone

44 Transfer the call

45 Yes

10 962 - 7 305

11 (531) 742 - 9 860

12 (632) 807 - 4 591

13 (800) 222 - 5015

14 (888) 555 - 1 212

15 0 123 456 789

27 Continue

28 Emergency number

29 Clear all

30 Help

XI

218

A U D I O a n d T E L E M AT I C S

8 - The system conﬁrms the va-

lidity of the number spoken,

answer "Yes". Say "No" to re-

turn to step 7.

12 - After the audible signal, allo-

Matching your Bluetooth®

telephone

cate a name to the telephone

by saying the name of your

choice.

The system can register up to 7 Bluetooth®

compatible mobile telephones.

The telephone which has the highest

level of priority is connected automati-

cally.

It is absolutely essential that the vehicle

is parked in a safe place with the park-

ing brake applied.

13 - The system says "Allocate an order

of priority between 1 and 7. One is

the highest level of priority".

Remember this matching code as

you must enter it in the telephone

in one of the following steps of the

matching procedure.

14 - Say a number between 1

and 7 to establish the level

of priority of the mobile tele-

phone.

9 - The system says "Start the matching

procedure on the telephone. Con-

sult the instructions in the telephone

manual".

15 - The system says and conﬁrms the

<name of the telephone> and the

<number> of its priority.

1 - Press the SPEAK button.

10 - Consult your mobile tele-

phone's user manual and

enter the matching code

recorded in step 7 in the

telephone.

16 - Answer "Yes" or say "No" to

return to step 13.

2 - Say "Conﬁgure".

17 - The systems says "Matching

complete" then emits an audible

signal and deactivates the voice

recognition.

3 - Say "Matching options".

4 - The system says "Do you wish to

match a telephone, delete a tele-

phone or obtain the list of matched

telephones?".

If the code is incorrect, the system

locks. To clear the code:

-

check that the telephone's voice

recognition is not activated,

-

with the ignition on and the audio

systemactive,presstheHANG UP

button for 2 seconds, 3 times in

succession.

5 - Say "Match a telephone".

If the system does not detect the

Bluetooth® compatible mobile tele-

phone, the matching process stops

accompanied by an audible signal.

6 - The systems says "Please say the

4 digits of a matching code".

If you select a level of priority which

has already been allocated to an-

other telephone, the system asks

you if you wish to replace this level

of priority.

11 - When it detects a Bluetooth®

compatible mobile telephone,

the system says "Please say

the name of the telephone

after the bleep".

7 - Say a 4-digit number which

will be recorded as the match-

ing code.

XI

219

A U D I O a n d T E L E M AT I C S

Making a telephone call using a number, phone book

A Bluetooth® compatible mobile telephone Recording a name in the system's

must be matched with the system.

7 - The system says "HOME, WORK,

MOBILE OR PAGER".

phone book

The system has its own phone book,

independent of that of the mobile tele-

phone.

It can contain up to 32 names for each

language.

8 - Say the location which cor-

responds to the number that

you wish to record.

Using a telephone number

1 - Press the SPEAK button.

Each name in the phone book is asso-

ciated with 4 locations: HOME, WORK,

MOBILE and PAGER.

9 - The system asks you to conﬁrm the

location.

2 - Day "Dial".

10 - Answer "Yes" or say "No" to

return to step 7.

3 - The system says "Number please".

1 - Press the SPEAK button.

2 - Say "Phone book".

4 - Say the telephone number.

11 - If a telephone number has already

been recorded for this location, the

system says "The current number

is <number>, number please".

5 - The system asks you to con-

ﬁrm this number, answer

"Yes". Say "No" to return to

the previous step.

3 - The system says "Select one of the

following items: New Entry, Change,

List of names, Delete or Clear all,

or say Cancel to return to the main

menu".

12 - If you do not wish to change

the telephone number, re-

peat the original number to

retain it, otherwise say the

new number.

To enter a new number:

4 - Say "New entry".

13 - The system asks you to conﬁrm the

number.

5 - The system says "Name please".

6 - Say the name of your choice.

14 - Answer "Yes" or say "No" to

return to step 11.

If your vehicle is ﬁtted with the audio-

telematics screen, you can use the

press buttons to dial a number then

make a call.

XI

220

A U D I O a n d T E L E M AT I C S

Making a telephone call using a name in the phone book, receiving a call

Using a name in the system's

phone book

The name must be recorded in the sys-

tem's phone book.

8 - Answer "Yes" or say "No" to Receiving a call

return to step 4.

The telephone ring is transmitted on the

speaker by the front passenger's seat.

If an audio source (CD, radio, ...) is in

operation when the call is received, it is

placed on mute and only the incoming

call is heard.

9 - The system says "Call to <name> at

<location>" and makes the call.

1 - Press the SPEAK button.

When the ignition switch is in the ACC

or ON position, the audio system is acti-

vated automatically if an incoming call

is received, even if it was originally off.

2 - Say "Call".

3 - The system says "Name please".

Redialling the last number

1 - Press the PICK UP button.

4 - Say the name of the person

that you wish to call.

1 - Press the SPEAK button.

5 - If several telephone numbers have

been recorded for this person, the

system says "Do you wish to call

<name> {home}, {work}, {mobile} or

{pager]?".

2 - Say "Redial".

At the end of the call, the audio system

returns to its previous status.

6 - Say the location correspond-

ing to the number that you

wish to call.

7 - The system request conﬁrmation of

the name.

XI

221

A U D I O a n d T E L E M AT I C S

Voice commands (1/2)

Press this button to start the voice recognition.

Conﬁgure

Divert the call

Add a location

Conﬁgure the conﬁrmation requests

Language

Home, at home

Work, at work

Mobile, on mobile

Pager, on pager

Help

Phone book

Dial

Call

Redial

New entry

Emergency number

Matching options

Match a telephone

Delete a telephone

List of matched telephones

Select a telephone

Continue

All

Change

Call this number

Change another entry

Try again

Cancel

Mute

Deactivate mute

Yes

Clear all

List of names

No

XI

When the system is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current

situation.

222

A U D I O a n d T E L E M AT I C S

Voice commands (2/2)

Press this button to start the voice recognition.

Zero

English

Word training

One

Phone book New entry

Phone book Change

Phone book Delete

Two

Repeat training

Activate

Three

Four

Phone book Clear All

Phone book List of names

Conﬁgure the conﬁrmation requests

Conﬁgure Select a telephone

Conﬁgure the matching options

Delete a name

Deactivate

Five

Incorporate the call

<digits> Send

Six

Seven

Eight

Nine

Star (*)

Hash (#)

Conﬁgure the language

Conﬁgure the PIN

XI

When the system is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current

situation.

223

AUDIO AND TELEMATICS for Your Citroen C-Crosser Suv First Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals