2007-2012 Citroen C-Crosser Suv PRACTICAL INFORMATION -> Changing a Bulb User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

PRACTICAL INFORMATION -> Changing a Bulb for Your Citroen C-Crosser Suv First Generation (2007-2012)

P R A C T I C A L I N F O R M AT I O N  
CHANGING A BULB  
Front lamps  
WARNING: RISK OF  
ELECTROCUTION  
!
Xenon bulbs must be replaced by a  
CITROËN dealer or a qualified work-  
shop.  
In some weather conditions (e.g. low  
temperature or humidity), the presence  
of misting on the internal surface of the  
glass of the headlamps and rear lamps  
is normal; it disappears after the lamps  
have been on for a few minutes.  
1. Direction indicators  
(PY21W - 21 W).  
2. Dipped beam headlamps  
(H11 - 55 W)  
or xenon bulb (D2S - 35 W).  
3. Sidelamps (W5W - 5 W).  
Handle the bulbs using a dry  
cloth.  
Do not clean the headlamps using  
a dry or abrasive cloth, or using  
detergent or solvent products, use  
a sponge and soapy water.  
!
4. Main beam headlamps  
(H7 - 55 W).  
5. Front foglamps  
(H11 - 55 W).  
IX  
137  
P R A C T I C A L I N F O R M AT I O N  
Changing direction indicator bulbs (1) Access to the bulbs on the left-hand Access to the bulbs on the right-  
side  
hand side  
When you change a bulb on the left-  
hand side, remove the relay box fixing  
nut B and move the relay box towards  
the rear.  
) Turn the bulb holder A to the left  
and remove it.  
) Pull the bulb and change it.  
To refit, carry out these operations in  
reverse order.  
When you change a bulb on the right-  
hand side:  
) Remove the screenwash reservoir  
fixing C and move the reservoir to-  
wards the rear.  
) Remove the coolant reservoir fixing  
nut D.  
Coloured bulbs must be replaced  
with bulbs of identical specification  
and colour.  
IX  
) Remove the clip E and raise the res-  
ervoir moving it towards the front.  
138  
P R A C T I C A L I N F O R M AT I O N  
Changing dipped beam headlamp  
bulbs (2)  
Changing sidelamp bulbs (3)  
Changing main beam headlamp  
bulbs (4)  
) Unscrew the cover H.  
) Disconnect the connector.  
) Unscrew the cover J.  
) Disconnect the connector.  
) Unscrew the cover F.  
) Disconnect the connector.  
IX  
) Turn the bulb holder I a quarter of a  
turn and remove it.  
) Turn the bulb G to the left and re-  
move it.  
) Move aside the spring K to release  
the bulb and remove it.  
) Pull the bulb and change it.  
To refit, carry out these operations in  
reverse order.  
To refit, carry out these operations in  
reverse order.  
To refit, carry out these operations in  
reverse order.  
139  
P R A C T I C A L I N F O R M AT I O N  
Changing integrated direction  
indicator side repeaters  
Changing foglamp bulbs (5)  
) Push the repeater A towards the ) Turn the wheel fully out for easy ) Using a screwdriver, remove the four  
access to the flap A located in the  
wheelarch.  
rear and detach it.  
) Unclip the repeater.  
clips B located in the wheelarch.  
) Disconnect the repeater connector  
and change the repeater.  
To refit, carry out these operations in  
reverse order.  
Toobtainrepeaters,contactaCITROËN  
dealer or a qualified workshop.  
IX  
140  
P R A C T I C A L I N F O R M AT I O N  
) Using a screwdriver, remove the ) Lift the access flap D located in the ) Disconnect the connector E.  
three clips C located below the  
bumper.  
wheelarch and slide it downwards.  
) Turn the bulb F to the left and remove it.  
To refit, carry out these operations in  
reverse order.  
IX  
141  
P R A C T I C A L I N F O R M AT I O N  
Changing brake lamp/sidelamp and  
direction indicator bulbs  
Rear lamps  
These two bulbs are changed from out-  
side with the tailgate open:  
) Open the tailgate (refer to the "Access"  
section),  
) Turn the pin C to the left and remove it.  
) Pull the bulb D out and change it.  
To refit, carry out these operations in  
reverse order.  
1. Third brake lamp (LEDs).  
2. Brake lamps/Sidelamps  
(21/5 - W21W - 5 W).  
3. Direction indicators  
(WY21W - 21 W).  
4. Reversing lamps (W21W - 21 W).  
) Remove the two lamp fixing bolts A,  
) Extract the lamp unit from outside,  
5. Number plate lamps  
(W5W - 5W).  
6. Foglamps  
(W21W - 21 W).  
Amber coloured bulbs, such as the  
direction indicators, must be replaced  
with bulbs of identical specification  
and colour.  
IX  
When refitting the lamp unit, align the  
two pins E with the openings on the ve-  
hicle.  
Changing the third brake lamp  
(LEDs)  
All work on the LED lamps must be  
carried out by a CITROËN dealer or a  
qualified workshop.  
) Turn the pin B to the left and remove it.  
) Pull the bulb out and change it.  
142  
P R A C T I C A L I N F O R M AT I O N  
Changing reversing lamp bulbs  
) Open the tailgate (refer to the "Ac- ) Pull the bulb C out and change it.  
cess" section),  
) Insert a thin screwdriver in the open-  
ing on the lens to press the tab E.  
) Remove the lens.  
) Pull the bulb out and change it.  
To refit, carry out these operations in  
reverse order.  
To refit, carry out these operations in  
) From the inside of the tailgate, in- reverse order.  
sert a screwdriver in the opening on  
the cover A to use it as a lever to  
open the cover.  
Changing number plate lamp bulbs  
IX  
) Open the tailgate (refer to the "Ac-  
cess" section) to gain access to the  
number plate lamps D,  
) Remove the lamp unit D while  
pressing it to the left.  
) To refit the lamp unit, insert the end of  
the tab F first, then align the tab G.  
)
Turn the pin B to the left and remove it.  
143  
P R A C T I C A L I N F O R M AT I O N  
Changing foglamp bulbs  
) Open the tailgate and the lower tail- ) Turn the pin and bulb assembly D to  
gate (refer to the "Access" section)  
and fold down the cover A.  
the left.  
) Remove the bulb.  
To refit, carry out these operations in  
reverse order.  
) Remove the 4 clips B using a screw-  
driver to detach the lamp cover.  
IX  
) When refitting the lamp unit, align  
the clips E with the openings on the  
bodywork.  
) Remove the bolts C and remove the  
lamp unit.  
144  
P R A C T I C A L I N F O R M AT I O N  
INTERIOR LAMP BULBS  
Glove box lamp  
Front and rear courtesy lamps  
) Insert a screwdriver to remove the courtesy lamp cover.  
) Remove the bulb while pressing the tab A.  
To refit the cover, align the hooks on the holes located in the body of the vehicle.  
) Turn the pin B anticlockwise and re-  
move it.  
) Remove the bulb.  
IX  
Low level lamp  
) Insert a screwdriver to remove the  
lamp cover.  
) Remove the bulb.  
145  

Related Topics

PRACTICAL INFORMATION
Changing a Wheel Changing a Fuse Battery Changing a Wiper Blade Towing Towing a Trailer / Caravan Fitting Roof Bars Accessories

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot