2010-2020 Citroen C-Zero 4 Door Instruments -> Instrument panel screen User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments -> Instrument panel screen for Your Citroen C-Zero 4 Door First Generation (2010-2020)

Instruments  
Instrument panel screen  
1
When the ignition switch is in the "ON" position, press button A repeatedly to display the following information in turn.  
Distance recorder  
Trip distance recorder (Trip A or B)  
System for measuring the total distance  
travelled by the vehicle during its life.  
Press button A.  
Each of these trip recorders indicates the  
distance travelled since the last reset.  
Press button A to display the desired trip.  
Reset to zero  
With the ignition on and either trip A or B  
displayed, press the button for more than  
2 seconds.  
The total distance appears in the screen.  
21  
Instruments  
Lighting dimmer  
Service indicator  
System which informs the driver when the  
next service is due in accordance with the  
manufacturer's servicing schedule.  
The point at which the next service is due  
is calculated from the last service indicator  
zero reset.  
This point can be indicated in one of two ways:  
-
-
the miles (km) remaining,  
the time remaining to the next service.  
System for manual adjustment of the  
brightness of the instruments and controls in  
relation to the exterior brightness.  
With the lighting on or off, press button A to  
select the function, then hold down to change  
the intensity of the lighting of the instruments  
and controls in "day" or "night" mode.  
The intensity of the lighting increases each time  
button A is pressed.  
When the lighting reaches the maximum  
setting, press again to change to the minimum  
setting.  
When the lighting reaches the required  
intensity, release button A.  
Operation  
1. The screen indicates that 620 miles  
(1000 km) or 1 month remain before the  
next service.  
2. The screen indicates that the date for the  
service has been exceeded.  
Every time the ignition is switched on,  
the service spanner is displayed for a  
few seconds to remind you that a service  
should be carried out as soon as possible.  
3. Once the service has been carried out, the  
distance or the number of months to the  
next service is displayed again.  
When the ignition is switched on, press  
button A several times in succession until the  
service indicator is displayed in the desired  
units.  
The setting is saved when you release button A  
and retained when the ignition switch is turned  
to OFF.  
22  
Instruments  
1
Resetting the service indicator to zero  
After each service, the service indicator should  
be rest to zero.  
The procedures is as follows:  
The display of "---", indicating that the  
service date has arrived, comes on  
automatically after a certain time and  
distance travelled. The screen then  
indicates the time remaining before the  
next service is due.  
F
F
Switch off the ignition (switch in the LOCK  
or ACC position).  
Press the reset button A several times in  
succession until the service indicator is  
displayed.  
F
F
Press and hold the reset button for a few  
seconds until the spanner flashes.  
Press the reset button while the spanner is  
flashing to change the display from "---" to  
"CLEAR".  
The distance (or time) remaining before the  
next service is due is displayed.  
23  

Related Topics

Popular Owner Manuals