COMFORT
These are three rings for each seat:
This ISOFIX mounting system pro-
vides fast, reliable and safe fitting of
the child seat in your vehicle.
"ISOFIX" MOUNTINGS
Your vehicle has been approved in
accordance with the new ISOFIX
regulation.
The seats*, represented below, are fit-
ted with regulation ISOFIX mountings:
The ISOFIX child seats are fitted
with two latches which are secured
easily on these lower rings A.
Some also have an upper strap
which is attached to the upper ring B.
To attach this strap, raise the
vehicle seat's head restraint
then pass the hook between
its rods. Then fix the hook on
the upper ring B and tighten the up-
per strap.
-
two lower rings A, located
between the vehicle seat back
and cushion, indicated by a
label,
The incorrect installation of a
child seat in a vehicle compro-
mises the child's protection in
the event of an accident.
For information regarding the ISOFIX
child seats which can be installed in
your vehicle, refer to the table of lo-
cations for ISOFIX child seats.
-
an upper ring B for securing the
upper strap, referred to as the
TOP TETHER, indicated by a
marking on the rear seat back
panel.
* According to version.
44
English 