DRIVING
EASY mode
(automatic mode)
Stopping the engine
Operating fault
Before switching off the engine, you
can change to position N to be in
neutral.
In all cases, it is essential that you
apply the parking brake to immobilise
the vehicle.
With the ignition on, illumi-
nation of this warning lamp
indicates a gearbox fault.
Select position E using the gear lever.
The gear engaged is displayed in the
instrument panel screen.
The gearbox continuously selects
the most suitable gear.
Contact a CITROËN dealer or a
qualified workshop.
On a slope, use the brake to
immobilise the vehicle and
place the gear lever in posi-
tion N, E or R.
Always press the brake pedal
while starting the engine.
Manual mode
Place the gear lever in position M,
then change up or down through the
gears by pressing:
Do not keep the vehicle immobilised
using the accelerator.
-
-
rearwards, "+" to change up,
forwards, "-" to change down.
Never select neutral N while
the vehicle is moving.
The gear engaged is displayed on
the instrument panel screen.
If the engine speed is too low, the
gearbox automatically changes down
to prevent stalling.
In all cases, it is essential to
apply the parking brake to
immobilise the vehicle.
In the event of overheating of the
clutch, position N is selected auto-
matically and the symbol N flashes
accompanied by an audible signal.
66
English 