Get Practical Information -> Changing a wheel Guide for Citroen C1 4 Door First Generation (2005-2014)

PRACTICAL INFORMATION

Tools

CHANGING A WHEEL

Parking the vehicle

The following tools are installed in a

carrier, located in the centre of the

spare wheel:

1. Wheelbrace

2. Jack with handle

3. Removable towing eye

 As far as possible, immobilise

the vehicle on level, stable, non-

slippery ground.

 If necessary, chock the wheel

diagonally opposite the wheel to

be changed.

 It is imperative that you ensure

that the occupants get out of

the vehicle and wait in a safe

location.

 Apply the parking brake, switch

off the ignition and engage ﬁrst

gear or reverse for the manual

gearbox, position

for the

"SensoDrive" gearbox.

Access to the spare wheel and

the jack in the boot

 Remove the carpet then the

Tyre pressures

These are indicated on the label po-

sitioned on the inner pillar of the left

door, see "Identiﬁcation markings".

plastic cover using the handle.

PRACTICAL INFORMATION

Removing the wheel

1. Remove the trim.

2. Slacken the wheel bolts using the

wheelbrace 1.

Reﬁtting the wheel

1. Position the wheel.

2. Screw in the bolts fully by hand.

3. Place the jack 2 in contact

with one of the four locations A

provided on the underbody, the

one closest to the wheel to be

changed.

4. Extend the jack 2 until its base is

in contact with the ground. Ensure

that the centreline of the jack base

is directly below the location A

used.

5. Lift the vehicle.

6. Remove the bolts and detach the

wheel.

3. Pre-tighten the bolts* using the

wheelbrace 1.

* If your vehicle is ﬁtted with alloy wheels, when tightening the bolts it is normal

to notice that the washers do not come into contact with the spare wheel. It is

still ﬁxed securely.

Practical Information -> Changing a wheel for Your Citroen C1 4 Door First Generation (2005-2014)

Related Topics

Practical Information

Popular Owner Manuals

Latest Owner Manuals