Safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
To secure the child seat to the TOP TETHER:
-
remove and stow the head restraint before
installing the child seat in this seating
position (refit it once the child seat has
been removed),
The seats, represented below, are fitted with
regulation ISOFIX mountings:
-
pass the strap of the child seat over the
top of the seat backrest, between the
apertures for the head restraint rods,
fix the hook of the upper strap to the
anchorage B,
-
-
tighten the upper strap.
-
a mounting B behind the seat for fixing
the upper strap, referred to as the TOP
TETHER.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
It is identified by a marking.
There are three mountings for each seat:
The TOP TETHER is used to secure the
upper strap of child seats that have one. This
arrangement limits the forward tipping of the
child seat in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
Follow the instructions for fitting
child seats contained in the seat
manufacturer's installation guide.
For information on the possibilities for installing
ISOFIX child seats in your vehicle, refer to the
summary table.
The ISOFIX child seats are fitted with
two latches which are secured on the two
mountings A.
-
two mountings A, located between the
vehicle seat back and cushion, indicated by
a marking,
Some seats also have an upper strap,
known as the Top Tether, which is attached to
mounting B.
132
English 