Advertisement

Advertisement

Cruise Control for Your Citroen C2 4 Door First Generation (2003-2009)

CRUISE CONTROL  
This driving assistance function allows you to drive at the speed of your  
choice without the need to action the accelerator  
This device is active at speeds above approx. 40 km/h (25 mph), in the  
higher gears only.  
The button A for cruise control is located on the lighting control stalk.  
Remark: The information relating to the cruise control is displayed in  
the instrument panel screen at B. This display causes the trip computer  
information to disappear (if it is shown on the instrument panel).  
II  
A
To select the function  
Turn the control 1 to the "CRUISE" position.  
To select a cruise speed  
B
When you select the function via control 1, no speed  
has yet been memorised.  
4
Accelerate to the desired speed, then give a short press on button 2  
button 4  
1
The cruise speed is then memorised. It is shown in the  
display on instrument panel B  
3
You can then release the accelerator pedal. The vehicle will automatically  
keep to that chosen speed.  
Remark: The vehicle speed may vary slightly from that memorised.  
2
Cruise control must only be used where the traffic conditions permit driving at a constant speed.  
Do not use it on congested roads or when the weather or the road conditions are poor.  
66  
CRUISE CONTROL  
Temporary override of the cruise speed  
Reactivation of cruise control  
By recalling the memorised speed:  
Following a disengagement, press on control 3  
While cruise control is in operation, it is always posꢀ  
sible to go above the cruise speed simply by pressing  
the accelerator pedal (for example to overtake another  
vehicle). The speed displayed flashes. You have only  
to release the accelerator pedal to return to your cruise  
speed.  
Remark: If during cruise control the system cannot keep  
to the cruise speed (e.g. on a steep descent), then the  
speed flashes. If necessary, brake to curb your speed.  
Your vehicle automatically resumes the memorised  
cruise speed, which then displays on the screen in  
instrument panel B  
By selecting the current speed:  
Give a short press on button 2 4, once the  
II  
desired speed is reached.  
The information "OFF" then disappears from the  
display.  
Adjustment of the memorised speed while  
cruise control is in operation  
To adjust the memorised speed, displayed in zone B  
If the memorised cruise speed is higher than the current  
speed, the vehicle will accelerate to match it.  
To cancel the function  
Button 4 to increase the speed.  
Button 2 to decrease the speed.  
By moving the control from the "CRUISE" position  
to the 0 position.  
Or stop the engine.  
Remark: Successive presses will modify the cruise  
speed in steps of 1 km/h and a continuous press in  
steps of 5 km/h (3 mph).  
The speed that was chosen is no longer memorised.  
Remark:  
While cruise control is in operation, the displayed speed  
flashes if the memorised speed is exceeded.  
If there is a malfunction, either the memorised speed or  
the dashes "- - -" will flash and the warning lamp "OFF"  
will come on permanently in the display.  
Disengagement of the memorised cruise speed.  
Either by pressing the brake pedal or the clutch  
pedal.  
Or by the ESP system being active.  
Or by pressing button 3  
Note: Cruise control is deactivated if the gear lever is in  
neutral (position N)  
Contact a CITROËN dealer.  
These actions bring up the informaꢀ  
tion "OFF" in the instrument panel  
display.  
The driver still has to remain attentive  
and in complete control of his vehicle.  
You are recommended to keep your feet  
within range of the pedals.  
These actions do not cancel the cruise speed which  
remains displayed.  
67