FRONT SEATS
Manual adjustments
Head restraint
1
To raise or lower the head restraint, pull it forwards at the same
time as sliding it.
The adjustment is correct when the top edge of the head
restraint is at the same height as the top of the head.
To remove it, bring it to the high position. Lift the tab with the aid of a coin
and pull.
Backrest angle
Action the control rearwards and adjust the angle of the
backrest.
It is possible to recline the backrest to an angle of 45° by
tilting it until it locks. Press the control to unlock.
2
Heated seats
The front seats can be heated indiꢀ
vidually. Use the controls located
at the side of the seats, and select
one of the three heating levels:
III
0: Off.
Reach
Lift the control bar and adjust to the desired position.
1: Slight heat.
2: Medium heat.
3: Maximum heat.
3
The seat temperature adjusts autoꢀ
matically.
Note: The heated seats only oper-
Seat height and rake adjustment
Lift the control and use the weight of your body to move the
seat to the desired position.
4
ate when the engine is running.
Access to the rear seat positions
5
To access the rear seat positions, action the control forwards
to fold the backrest and slide the front seat.
Afterwards the front seat will revert to its initial position.
Make sure that the seat is secured in place (particularly if the
rear seats are folded).
82
English 