Get Navigation ? Traffic Information Guide for Citroen C2 4 Door First Generation (2003-2009)

NAVIGATION – TR AFFIC INFORMATION

When navigation is to be used for the

Speciﬁc functions or services may vary

depending on the CDꢀROM version or the

country where the system is used.

GPS satellite reception or guidance calꢀ

culation may be affected temporarily (for

example under bridges or in underground

car parks, etc.) by where the vehicle is

located.

ﬁrst time, or when the battery has been

disconnected for any reason, the navigaꢀ

tion system has to be initialised. For this

operation the vehicle must be parked

outdoors so that it can pick up satellite

signals. Turn the ignition to position M

(see vehicle Handbook) and leave for at

least ﬁfteen minutes.

TMC TRAFFIC INFORMATION

INTRODUCTION

In some countries, trafﬁc information mes-

sages are transmitted by FM radio stations.

Such information, broadcast by the RDS

system, can be received and decoded by

NaviDrive. See the description of this funcꢀ

tion from page 21.

The onꢀboard navigation system uses audible

and visual instructions to guide you towards

the destination of your choice.

The system uses a cartographic database

stored on a CDꢀROM, and a GPS system.

The GPS system enables your position

to be plotted via contact with a number of

satellites.

The navigation system is composed of the

following elements :

MAIN MENU FOR NAVIGATION – TRAFꢀ

FIC INFORMATION

Press on P then use the control G to select

the icon Navigation - Trafﬁc information to

access the following choices :

ꢁ Selecting a destination.

ꢁ Stages and routes.

ꢁ Guidance options.

ꢁ

TMC trafﬁc information.

ꢁ Stop/resume guidance.

After the start of a guidance, a display cauꢀ

tions you concerning the use of navigation.

If you accept its content, press on G

VOLUME FOR VOICE INSTRUCTIONS

When receiving voice instructions, you can

adjust the volume using button C, or controls

4 and 6 at the steering wheel.

ꢁ A CDꢀROM reader.

You can deactivate voice instructions via

the menu “Configuration” ꢀ “Display”ꢀ

“

Sound”.

ꢁ A button for recall of the last voice mesꢀ

sage ꢀ during navigation, a long press

on the end of the lighting control stalk 7

repeats the latest voice information.

ꢁ Cartographic data in the form of a CDROM

that has to be inserted, printed side up,

in the aperture X

ꢁ A synthesised voice for enunciating the

guidance instructions during navigation.

ꢁ A display screen.

ꢁ A GPS aerial.

Respect the road regulations that are in

force.

ꢁ Control on the dashboard and controls at

the steering wheel.

NAVIGATION – TR AFFIC INFORMATION

During navigation, provided the navigation CDꢀROM is present, the display indicates the

manoeuvres to be made :

1 In navigation : manoeuvre to be made or, momentarily, direction to follow.

Except during guidance : Display of a compass.

2 Next manoeuvre to be made.

CONTEXTUAL MENU FOR NAVIGATION

– TRAFFIC INFORMATION

A press on W during navigation brings up

a display on the right of the screen, permitꢀ

ting you to :

3 Next road to be taken and name of town.

4 Symbol concerning Trafﬁc Information or services in proximity (colour display).

5 Road currently being taken and name of town.

6 Estimated time of arrival at destination (based on ﬂowing trafﬁc).

7 Distance to ﬁnal destination.

8 Distance to the next manoeuvre.

Remark :

ꢁ Modify the display of the map. Display

full screen or on the right hand side (colour

screen only).

ꢁ Alter the route. During guidance this

function lets you modify your original

route. Enter the distance of the desired

diversion then select the “OK” function

and validate.

ꢁ Memorise the position of the vehicle

The vehicle position will be saved in

the current directory, under a label for

name of town and street (if available on

the Navigation CDROM). Otherwise the

label corresponds to GPS coordinates

for the location.

Depending on the situation of the vehicle and the reception of the GPS information, this inforꢀ

mation may temporarily be absent from the screen.

Tip :

When Navigation is being displayed, a long press on the “Menu” button activates a demonstraꢀ

tion of the Navigation function of your NaviDrive.

Next select a destination by using the Navigation Menu. After entering this, start Navigation

and see a simulation of the movements of your vehicle. The point of departure will be either

the place where the vehicle is now, or the last known location. It is possible to enter a different

point of departure via the demonstration menu. This demonstration can let you see a route

that you wish to take in the future.

ꢁ Modify the guidance criteria for your

itinerary.

ꢁ Stop/resume guidance.

NAVIGATION – TR AFFIC INFORMATION

ꢁ If the list contains less than 6 names, these

last will display automatically.

Select a town, then validate.

When the complete name of the town is

displayed, select it then validate “OK”.

2 Enter the name of the street

Enter the street name in the same way as

you entered the town name

Note : Do not enter the type of road (street,

avenue ,etc.).

3 Validation

When the complete name of the street is

displayed, select it then validate “OK”.

Tips :

CHOOSE A DESTINATION

This menu allows you to :

ꢁ Enter an address.

ENTER AN ADDRESS

ꢁ If you enter only the name of the town and

then validate immediately “OK”, you will

go directly to the town centre.

The last guidance address is displayed.

1 Enter a town name

ꢁ To enter the name of a town, select “Town”

then validate. Next, select then validate

letter by letter or enter them using the

alphanumeric keypad.

If you make an error, press “Correct” to

delete the last letter entered.

ꢁ Access NaviDrive Services if you have

subscribed to a speciﬁc contract (assist-

ance and entry of a destination).

ꢁ Choose a centre of interest that is availꢀ

able in a town (restaurant, airport, hotel,

cinema, theatre, etc.

ꢁ Choose a destination stored in a

directory.

ꢁ Choose one of the last twenty desꢀ

tinations.

ꢁ The function “Store” memorises the

address displayed into a ﬁle of the cur-

rent directory.

ꢁ The selection “Present location” displays

the current address.

ꢁ The selection “GPS” brings up the GPS

coordinates.

Remark :

After the ﬁrst letter has been validated, only

those letters that can complete an existing

name in the database will be displayed.

ꢁ “

List” tells you, as you begin to enter the

name of the town, how many towns start

with or include the same letters.

Select “List” to choose one of them.

NAVIGATION – TR AFFIC INFORMATION

Remark :

If the centre of interest selected is not availꢀ

able at the programmed location, a message

informs you of this.

After validation of the location, the centre

of interest closest to your location appears.

The distance indicated is the distance in a

straight line from this location.

A message in the strip (X/n) tells you if

there is more than one establishment (n =

maximum) offering a similar centre of interꢀ

est within a radius of 50 km in a straight line

from the location selected.

Use “<<”, “>>” or “<”, “>” to study the list

on offer.

When the establishment of your choice

appears, you can choose :

ꢁ “

OK” to activate guidance to this centre

of interest.

ꢁ “*1” to add it to your directory.

ꢁ “

Contact” to make a call to this centre

of interest.

4 Enter a street no. or the name of an

intersecting street

You can enter the number of the street you

require, using either control G or the alphaꢀ

numeric keypad.

CHOICE OF A CENTRE OF INTEREST

If you desire to be directed to a centre of

interest, select the type of centre of interest

and validate.

Select then validate “OK”.

The list of centres of interest of the type

selected then appears. Select then validate

the centre of interest desired, in order to

access the menu “Choice of location”.

Remark :

The ﬁrst and last street numbers are dis-

played.

SELECTION FROM THE DIRECTORY

You can also select a street from the list

of “Intersections”, which means you do not

have to enter the street no.

The lastꢀentered address is displayed.

The function “Select in the directory” lets

you start a guidance towards a location

that is stored on a ﬁle, with the Navigation

CDꢀROM present.

There are 3 possibilities for deﬁning the

location close to which you desire to ﬁnd a

centre of interest :

Remark :

If the street selected has no numbers, the

list of street intersections is automatically

displayed.

The complete destination is then disꢀ

played.

Select then validate “OK”, to start the guidꢀ

ance.

Follow the action instructions.

ꢁ Take the last address entered by validating

the “OK” function.

ELECTING FROM YOUR MOST RECENT

DESTINATIONS

The function “Select from your most

recent destinations” lets you start guidance

towards one of the last twenty destinations

that have been automatically stored by your

installation.

ꢁ Enter the name of a different town then

enter the street name (optional).

ꢁ Bring up the name of the place you are

currently at, via the function “Present

location”.

Navigation ? Traffic Information for Your Citroen C2 4 Door First Generation (2003-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals