WINDOWS
Antiꢀpinch on driver's window
An antiꢀpinch device stops the window from rising. If it meets an obstacle, it
goes back down.
After a battery disconnection or if there has been a malfunction
have to reꢀinitialise the antiꢀpinch function:
Use the control to fully open the window, then reclose. It will rise only a
few centimetres.
Press again on the control until the window closes fully.
II
During this operation, the antiꢀpinch protection does not work.
Manual operation
Turn the handle to raise or lower the window.
Electric operation
The switches on the console allow
the vehicle’s electric windows to
be controlled from the driver’s
position.
Sequential control on
driver's side
An action on the control to the first
notch causes a window movement
which stops as soon as the control
is released.
An action on the control to the
second notch causes the window
to close or open completely, a furꢀ
ther press on the control stops the
movement.
ALWAYS PAYATTENTION TO WHERE CHILDREN ARE WHEN
OPENING OR CLOSING THE WINDOWS
Always remove the ignition key when leaving the vehicle, even if for a
short time.
If there is an obstruction when operating a window, you must immediꢀ
ately reverse the window movement. To do that, reverse the position of
the control concerned.
If the driver is operating the electric window controls for passengers, he
or she should ensure that no passenger is obstructing the window from
closing.
Note: The window controls also
operate for a limited time after you
have switched off the ignition.
The driver must ensure that the electric windows are used properly by
51
English 