WIPERS
B. Rear screen wipe
Changing the wiper blades
If you have to replace them, the
wiper blades have to be parked in
the maintenance position. For
this, switch off the ignition and then
within one minute move the wiper
control stalk. The wipers stand up
in a vertical position.
After replacement, switch on the
ignition and move the wiper
control stalk so that the wipers
resume their normal position.
First notch
Off.
Second notch
Intermittent rear wipe.
B
II
Third notch
Timed rear wash/wipe.
Automatic wipe
When the windscreen wipers are
operational and reverse gear is
engaged.
Activation/deactivation of this
function is possible in the menu
"Personalisation/Configuration" in
the "Main menu".
Deactivation may be necessary
when a bicycleꢁcarrier is installed
on the tailgate.
A
A. Windscreen wash
To operate the windscreen wash,
pull the wiper stalk towards you.
The screen wash is accompanied
by a timed wipe of the windscreen,
the headlamp wash also activates
if the dipped beams are on.
Check that the windscreen and rear wipers can operate freely when
for example a bicycle-carrier is fitted, or in freezing conditions.
Remove any accumulation of snow at the base of the windscreen.
48
English 