Ease of use and comfort -> Rear seats (row 3) for Your Citroen C3 Aircross SUV First Generation (2017-2023)

Ease of use and comfort  
passengers in the event of sudden braking or  
an accident.  
The contents of the boot may be thrown  
forward - risk of serious injury!  
Folding the backrest  
Manoeuvring the seat backrest should  
only be done when the vehicle is  
stationary.  
3
Flat load floor condition: for a 7 seats  
model, both second row seat and third  
row seat can be folded.  
►ꢀ If necessary, move the front seats forward.  
►ꢀ Check that no person or object will interfere  
with folding down the backrest (clothing,  
luggage, etc.).  
►ꢀ Check that the outer seat belts are lying flat  
on the backrest.  
Rear seats (row 3)  
7 seats version  
►ꢀ Pull the strap 1 and fold the backrest 2  
inwards to fold the backrest of left side seat  
(40%).  
►ꢀ Pull the strap 3 and fold the backrest 4  
inwards to fold the backrest of right and middle  
seat (60%).  
Head restraint height  
adjustment  
Adjusting the height  
(Depending on version)  
Repositioning the backrest  
First check that the outer seat belts  
are lying vertically flat alongside the  
backrest latching rings.  
5 seats version  
►ꢀ Pull the latch knob 1 up and fold the  
backrest 2 inwards to fold the backrest.  
►ꢀ Put the backrest 2 in the upright position  
and push it firmly to latch it home.  
►ꢀ Ensure that the outer seat belts were not  
trapped during the operation.  
Upwards:  
►ꢀ Pull the head restraint up to the desired  
position; you can feel the head restraint clicking  
into position.  
Please note: an incorrectly latched  
backrest compromises the safety of  
Downwards:  
►ꢀ Press lug A to lower the head restraint.  
17  
Ease of use and comfort  
The head restraint is correctly adjusted  
when its upper edge is level with the  
top of the occupant's head.  
Returning the seat to the sitting position  
►ꢀ Cushion to be latched to the striker.  
►ꢀ Put the backrest in usable position.  
►ꢀ Check that the seat belt is not trapped  
during the manoeuvre.  
The label on the seat backrest  
Access to row 3  
Third row seats are accessed via the second  
row.  
Follow the instructions to assemble and  
disassemble the seat in the vehicle.  
Do not keep luggage on top of the folded  
seat to avoid damaging the instructions label  
due to rubbing.  
Before tumbling the 40% seat, ensure  
the frontseat is moved forward  
appropriately.  
Third row passengers should not keep  
the feet in the second row seat  
locking zone.  
►ꢀ Pull the latch knob 1 and fold the backrest 2  
inwards to fold the backrest.  
►ꢀ Pull strap 1 (from outside the vehicle) and  
strap 2 (from inside the vehicle) to fold the seat  
backrest and tumble the seat.  
►ꢀ Tilt the entire seat forwards. The seat and  
cushion slide towards the front seat.  
This makes up a space for the third row seat  
passengers to get into their seats or exit the  
vehicle.  
Fully folded position  
Removing the seat  
Ensure third row seat head restraint is  
fully down before folding backrest.  
18  
Ease of use and comfort  
Refitting the seat  
Heating and Ventilation  
3
Air intake  
The air circulating in the passenger  
compartment is filtered and originates either  
from the exterior, via the grille located at the  
base of the windshield, or from the inside in air  
recirculation mode.  
►ꢀ Pull the strap 3 and detach the seat from  
the vehicle.  
►ꢀ Takeout the seat from the vehicle and store  
it carefully.  
Controls  
The controls are grouped together in the  
control panel on the centre console.  
►ꢀ Slide the seat hook 4 on the front of the  
seat over the guide and lock it to the wire.  
►ꢀ Press down the seat and lock the seat latch  
with the wire.  
Buckles to be restored after seat  
removal  
Air distribution  
►ꢀ Unfold the backrest and lock it with the  
upper wire.  
While re-attaching the seats in the  
vehicle, the left and right seats must  
be placed in their proper location.  
1. Windshield defroster outlets  
2. Side defroster outlets  
3. Side outlets  
4. Central outlets  
5. Floor outlets  
Do not leave the buckles on carpet floor  
after seats removal.  
►ꢀ Lift the carpet slit.  
►ꢀ Insert the buckles inside the carpet  
towards rear side.  
►ꢀ Re-position the buckles after seat  
assembly.  
19