Driving
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The
engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.
Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Operation
Going into engine STOP mode
Special cases: STOP mode not
available
For your comfort, during parking
manoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
STOP mode does not affect the
functionality of the vehicle, such as for
example, braking, power steering...
The "ECO" warning lamp comes
on in the instrument panel and the
engine goes into standby:
STOP mode is not invoked when:
-
-
-
the driver's door is open,
the driver's seat belt is not fastened,
the vehicle has not exceeded 6 mph
(10 km/h) since the last engine start using
the key,
-
with the 6-speed electronic gearbox
system, at speeds below 5 mph (8 km/h),
when you press the brake pedal or put the
gear lever in position N
-
the engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
-
demisting is active,
A time counter calculates the
sum of the periods in STOP
mode during a journey. It rests
itself to zero every time the
ignition is switched on with the
key.
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key.
some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
The "ECO" warning lamp flashes for
a few seconds then goes off.
This operation is perfectly normal.
132
English 