Access
Reinitialisation
In the event of a malfunction you must reinitialise
the operation of the electric windows:
Safety anti-pinch
The one-touch electric windows are fitted with
a safety anti-pinch function.
When the window rises and meets an obstacle,
it stops and partially lowers again.
F
F
F
release the switch and pull it again until the
window closes completely,
hold the switch for approximately
one second after closing,
press the switch to lower the window
automatically.
4
The safety anti-pinch function is not active
during these operations.
Always remove the key from the ignition when
leaving the vehicle, even for a short time.
Deactivating the rear window and
door controls
In the event of unwanted opening of the
window on closing (for example in the
presence of frost):
F
For the safety of your children, press
switch 5 to prevent operation of the rear
windows irrespective of their position.
F
F
F
press the switch until it opens
completely,
then pull it immediately until it
closes,
continue to hold the switch for
approximately one second after the
window has closed.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When the driver operates the
passenger electric window switches,
they must ensure that no one is
preventing correct closing of the
windows.
With the indicator lamp on, the rear controls are
deactivated.
With the indicator lamp off, the rear controls are
activated.
The safety anti-pinch function is not
active during these operations.
When the function is activated,
this warning lamp lights up on the
instrument panel for a few seconds.
The driver must ensure that the
passengers use the electric windows
correctly.
Be particularly aware of children when
operating the windows.
This control also deactivates the interior
rear door controls.
For more information, refer to the
"Electric child lock" section.
63
English 