Advertisement

Advertisement

Comfort -> Front seats for Your Citroen C3 Picasso SUV Second Generation (2013-2017)

Comfort  
Front seats  
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to  
adapt your position for ease of driving and comfort.  
Forwards-backwards adjustment  
Driver's seat height adjustment  
Seat back angle adjustment  
F
Pull the control lever upwards to raise  
or push it downwards to lower, as many  
times as necessary, to obtain the position  
required.  
F
Push the control rearwards.  
F
Raise the control bar and slide the seat  
forwards or backwards.  
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming  
the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement immediately.  
52  
Comfort  
Additional adjustments  
3
Head restraint height adjustment  
Adjusting the armrest  
The head restraint is fitted with a frame  
with notches which prevents it from  
lowering; this is a safety device in case  
of impact.  
The adjustment is correct when the  
upper edge of the head restraint is  
level with the top of the head.  
Never drive with the head restraints  
removed; they must be in place and  
adjusted correctly.  
F
F
To raise the head restraint, pull it upwards.  
To remove the head restraint, press the  
lug A and pull the head restraint upwards.  
To put the head restraint back in place,  
engage the head restraint stems in the  
openings keeping them in line with the seat  
back.  
F
Press the control located under the front  
end of the armrest to release it.  
Move it to the low position.  
Raise it notch by notch to reach the desired  
position.  
F
F
F
F
To place the armrest in the vertical position,  
raise it and push it backwards beyond the point  
of resistance.  
To lower the head restraint, press the lug A  
and the head restraint at the same time.  
53  
Comfort  
Heated seats control  
With the engine running, the front seats can be  
heated separately.  
F
Use the adjustment dial, placed on the side  
of each front seat, to switch on and select  
the level of heating required:  
0: Off.  
1: Low.  
2: Medium.  
3: High.  
Table position of the front  
passenger seat  
Do not forget to fold the "aircraft" type  
table fixed on the back of the seat first.  
For safety reasons, a passenger sat in  
the rear of the vehicle must not place  
his feet on the front seat in the table  
position.  
Placing this seat in the table position, with the  
rear benchseat also in the table position, allows  
you to transport long objects.  
F
Push the control upwards and guide the  
seat back forwards to fold it onto the seat  
cushion.  
F
To put it back in place, lift up the seat back  
and guide it rearwards until it locks in.  
54