Advertisement

Advertisement

Fittings for Your Citroen C3 Picasso SUV Second Generation (2013-2017)

Fittings  
Front interior fittings  
1. Sun visor.  
2. Child surveillance mirror.  
3. Grab handle with coat hook.  
4. Navigation screen and scented air  
freshener.  
or  
Storage  
5. Storage compartments.  
6. Glove box.  
7. Storage pockets.  
8. Open storage compartment at side of  
passenger seat.  
9. Ticket holder.  
10. 12 volt socket (100 W max).  
11. USB port / auxiliary socket.  
12. Cup holder.  
84  
Fittings  
Sun visor  
Provides protection against sunlight from the  
Child surveillance mirror  
Glove box  
front or the side.  
6
This has areas for storing a bottle of water, the  
vehicle's handbook, ...  
A child surveillance mirror is installed above  
the interior rear view mirror. This allows you  
to monitor the vehicle’s rear passengers, or it  
can facilitate conversation between the front  
and rear passengers without the need to move  
the rear view mirror. It can be folded away to  
eliminate dazzle.  
The sun visors are fitted with a courtesy mirror  
with concealing flap and a ticket holder.  
F
To open the glove box, pull the handle  
towards you.  
85  
Fittings  
12 V accessory socket  
Storage drawer  
It is located under the front passenger seat.  
F
To use the 12 V socket (max power:  
100 Watts), lift the cap and connect the  
accessory.  
Opening  
F
Raise the front of the drawer and pull it.  
The connection of an electrical device  
not approved by CITROËN, such as a  
USB charger, may adversely affect the  
operation of vehicle electrical systems,  
causing faults such as poor telephone  
reception or interference with displays  
in the screens.  
Do not place heavy objects in the  
drawer.  
86  
Fittings  
Ticket holder  
Mats  
Removable carpet protection.  
Refitting  
To refit the mat on the driver's side:  
F
F
F
position the mat correctly,  
refit the fixings by pressing,  
check that the mat is secured correctly.  
6
It is located at the top of the dashboard centre  
panel.  
It can be used to hold toll or parking tickets.  
Fitting  
To avoid any risk of jamming of the  
pedals:  
When fitting the mat for the first time, on the  
driver's side use only the fixings provided in the  
wallet attached.  
The other mats are simply placed on the  
carpet.  
-
only use mats which are suited to  
the fixings already present in the  
vehicle; these fixings must be used,  
never fit one mat on top of another.  
-
The use of mats not approved by  
CITROËN may interfere with access to  
the pedals and hinder the operation of  
the cruise control / speed limiter.  
Removal  
To remove the mat on the driver's side:  
F
F
F
move the seat as far back as possible,  
unclip the fixings,  
remove the mat.  
87  
Fittings  
Rear interior fittings  
Seat pockets  
Cup holder  
Aircraft style tables  
They are located on the back of the front seats.  
There is a cup holder located at the rear of the  
centre console.  
Lift the catch to release the table and unfold it.  
Do not place hard or heavy objects  
on the table. They could become  
dangerous projectiles in the event of  
sharp braking or impact.  
As a safety precaution, if too much  
pressure is exerted the table will fold  
downwards.  
88  
Fittings  
Individual reading lamps  
Side blinds  
Storage tray  
6
Reading lamps are built into the back of the  
front seats, behind the tables.  
Blinds are available for the side windows.  
Pull the side blind longways by the tab to use it.  
Always guide the blind slowly using the tab.  
When unfolded, this provides a storage area  
split into 2 sections, completing the storage  
spaces available at the rear of the vehicle.  
With the ignition on, they illuminate the top  
of the table without inconveniencing other  
passengers.  
They are only accessible if the table is  
unfolded.  
F
Press the button to switch the lamp on or  
off.  
89  
Fittings  
Ski flap  
Device for storing and transporting long  
objects.  
Opening  
F
F
F
F
Lower the storage shelf.  
Press the flap opening control.  
Lower the flap.  
Check that the adjustable boot floor is in  
the high position.  
F
Load the objects from inside the boot.  
90  
Fittings  
Boot fittings  
1. Open storage compartments.  
2. Adjustable boot floor.  
3. Carrier bag hook.  
4. Securing rings.  
5. Storage space under boot carpet  
6. Rear parcel shelf.  
6
91  
Fittings  
2-position adjustable boot  
The two-position adjustable boot floor allows  
you to:  
Placing the adjustable boot floor  
Placing the adjustable boot floor  
in the low position  
in the high position  
-
-
-
maximise the volume of the boot,  
F
Lift the adjustable boot floor by pulling on  
the strap.  
F
Lift the adjustable boot floor by pulling the  
strap.  
partition the boot (stowing the rear shelf...),  
obtain a flat floor from the boot opening to  
the front seats, when the rear bench seat is  
in the folded and fully back position.  
F
Move the adjustable boot floor rearwards  
and then down, following the guides on the  
sides.  
F
Move the adjustable boot floor rearwards  
then up to its high position.  
In the high position, the adjustable boot floor  
allows stowing of the rear parcel shelf and  
fragile objects.  
The adjustable boot floor is fitted with four  
stowing rings to secure your loads using the net  
available as an accessory.  
Ensure that your boot is empty before  
handling the adjustable boot floor.  
92  
Fittings  
Hooks  
2-panel rear parcel shelf  
6
The hooks can be used to hold shopping bags.  
The rear section is attached to the tailgate by  
two cords.  
Refitting the shelf  
From the boot:  
F
F
F
position the shelf so that the two notches  
are directly above the fixing pins,  
push the shelf towards the inside of the  
vehicle to clip it in place,  
Removing the shelf  
From the boot:  
F
F
F
unhook the two cords,  
pull the shelf towards you to unclip it,  
lift the shelf to remove it.  
attach the two cords.  
It can be stored under the adjustable boot floor,  
if this is in its high position.  
93