Get Multifunction screens Guide for Citroen C3 Picasso SUV Second Generation (2013-2017)

Multifunction screens

Monochrome screen A (without audio equipment)

Displays in the screen

Controls

Main menu

2

F

Press the "MENU" button to scroll through

the various menus of the main menu:

-

vehicle configuration,

options,

display adjust,

language,

This displays the following information:

There are three display control buttons:

-

time,

date,

-

"Back" to abandon the operation in

progress,

"MENU" to scroll through the menus or

sub-menus,

"OK" to select the menu or sub-menu

required.

units.

ambient temperature (this flashes if there is

a risk of ice),

Press the "OK" button to select the menu

required.

-

state of the openings (doors, boot, etc.),

trip computer (refer to the end of the

section).

Warning messages or information messages

may appear temporarily. These can be cleared

by pressing the "Back" button.

27

Multifunction screens

Display adjust

Language

Once the "Display adj" menu has been selected,

you can gain access to the following settings:

Once the "Language" menu has been

selected, you can change the language used

by the display by selecting a language from the

list offered.

-

year,

month,

day,

hour,

minutes,

12 or 24 hour mode.

Units

Once the "Units" menu has been selected,

you can change the units of the following

parameters:

Vehicle conﬁguration

-

temperature (°C or °F),

fuel consumption (l/100 km, mpg or km/l).

Once the "Vehicle config" menu has been

selected, you can activate or deactivate the

following equipment:

F

Once you have selected a setting, press

the "OK" button to change its value.

Once the fuel consumption unit has

been changed to mpg, the information

relating to speed and distance also

changes to miles.

-

wiper linked with reverse gear (see the

"Visibility" section),

-

guide-me-home lighting (see the "Visibility"

section).

Using this menu, you can also reinitialise the

tyre under-inflation detection system (see the

"Safety" section).

As a safety measure, configuration of

the multifunction screen by the driver

must only be done when stationary.

F

Wait for approximately ten seconds without

any action to allow the changed data to be

recorded or press the "Back" button to

cancel.

Options

Once the "Options" menu has been selected,

you can start diagnostics of the status of the

equipment (active, not active, faulty).

The screen then returns to the normal display.

28

Multifunction screens

Monochrome screen A

Displays in the screen

Controls

Main menu

2

F

Press the "MENU" button for access to the

main menu, then press the "5"

or "6" buttons to scroll through the various

menus:

-

radio-CD,

vehicle configuration,

options,

display settings,

language,

units.

This displays the following information:

From the audio equipment control panel, you

can:

-

time,

date,

F

press the "MENU" button for access to the

main menu,

ambient temperature (this flashes if there is

a risk of ice),

press the "5" or "6" buttons to scroll

through the items on the screen,

press the "MODE" button to change the

permanent application (trip computer,

audio source...),

-

state of the openings (doors, boot...),

audio sources (radio, CD...),

trip computer (refer to the end of the

section).

F

Press the "OK" button to select the menu

required.

Warning messages or information messages

may appear temporarily. These can be cleared

by pressing the "Back" button.

F

press the "7" or "8" buttons to change a

setting value,

press the "OK" button to confirm,

Radio-CD

F

or

F

With the audio equipment switched on, once

the "Radio-CD" menu has been selected you

can activate or deactivate the functions linked

with use of the radio (RDS, REG) or the CD

(introscan, shuffle, CD repeat).

press the "Back" button to abandon the

operation in progress.

For more information on the "Radio-CD"

application, refer to the "Audio system" section.

29

Multifunction screens

Display adjust

Once the "Display adjust" menu has been selected,

Setting the date and time

you can gain access to the following settings:

F

Press the MENU button

Select "Display adjust" using the "5"

or "6" button.

Press OK to confirm the selection.

Select the "Year" function using the "5"

or "6" button.

Press OK to confirm the selection.

Choose the desired value, using the "7"

or "8" button.

-

year,

month,

day,

hour,

minutes,

12 or 24 hour mode.

F

Press OK to confirm the selection.

Repeat the procedure for the "Month",

"Day", "Hour", and "Minutes" settings.

Vehicle conﬁguration

F

Once you have selected a setting, press

the "7" or "8" buttons to change its value.

Once the "Vehicle Config" menu has been

selected, you can activate or deactivate the

following equipment:

-

wiper linked with reverse gear (see the

"Visibility" section),

-

guide-me-home lighting (see the "Visibility"

section).

Using this menu, you can also reinitialise the

tyre under-inflation detection system (see the

"Safety" section).

F

Press the "5" or "6" buttons to switch

respectively to the previous or next setting.

Press the "OK" button to record the

change and return to the normal display or

press the "Back" button to cancel.

Options

Once the "Options" menu has been selected,

you can start diagnostics of the status of the

equipment (active, not active, faulty).

30

Multifunction screens

Language

As a safety measure, configuration of

the multifunction screen by the driver

must only be done when stationary.

2

Once the "Language" menu has been

selected, you can change the language used

by the display, by choosing a new language

from the list offered.

Units

Once the "Units" menu has been selected,

you can change the units of the following

parameters:

-

temperature (°C or °F),

fuel consumption (l/100 km, mpg or km/l).

Once the fuel consumption unit has

been changed to mpg, the information

relating to speed and distance also

changes to miles.

31

Multifunction screens

Monochrome screen A associated with the eMyWay colour

screen

Displays in screen A

Main menu

F

Press the "MENU" button to scroll through

the various menus of the main menu:

-

vehicle configuration,

options,

language,

This displays the following information:

Controls

There are three display control buttons:

-

ambient temperature (this flashes if there is

a risk of ice),

units.

-

"Back" to abandon the operation in

progress,

"MENU" to scroll through the menus or

sub-menus,

"OK" to select the menu or sub-menu

required.

-

trip computer (refer to the end of the

section).

F

Press the "OK" button to select the menu

required.

Warning messages or information messages

may appear temporarily. These can be cleared

by pressing the "Back" button.

32

Multifunction screens

2

Options

Units

Once the "Options" menu has been selected,

you can start diagnostics of the status of the

equipment (active, not active, faulty).

Once the "Units" menu has been selected,

you can change the units of the following

parameters:

-

temperature (°C or °F),

fuel consumption (l/100 km, mpg or km/l).

Vehicle conﬁguration

Once the "Veh config" menu has been

selected, you can activate or deactivate the

following equipment:

Language

Once the "Languages" menu has been

selected, you can change the language used

by the display by selecting a new language

from the list offered.

Once the fuel consumption unit has

been changed to mpg, the information

relating to speed and distance also

changes to miles.

-

wiper linked with reverse gear (see the

"Visibility" section),

guide-me-home lighting (see the "Visibility"

section),

daytime running lamps (see the "Visibility"

section).

The chosen language will also be used

Using this menu, you can also reinitialise the

tyre under-inflation detection system (see the

"Safety" section).

by the eMyWay system colour screen.

For safety reasons, configuration of the

multifunction screen by the driver must

only be done when stationary.

33

Multifunction screens

Displays in the eMyWay

system colour screen

Display conﬁguration

This menu allows you to choose a colour

scheme for the display screen, adjust the

brightness, the date and time, and choose

the units for distance (km or miles), fuel

consumption (l/100 km, mpg or km/l) and

temperature (°Celsius or °Fahrenheit).

This displays the following information:

Setting the date and time

"SETUP" menu

-

time,

date,

F

Press the SETUP button.

Select "Display configuration" and press

the knob to confirm.

Press the SETUP button to access the

"SETUP" menu. It gives you access to the

following functions:

audio functions,

parking sensor information (depending on

version),

F

Select the "Adjust date and time" and

press the knob to confirm.

Adjust the settings in turn using the

directional arrows, then confirm by

pressing the knob.

-

"Display configuration",

"Voice synthesis",

"Trip computer".

-

navigation system information.

Select "Synchronise minutes with GPS" so

that the minutes are adjusted automatically by

satellite reception.

34

Multifunction screens

2

Adjusting the voice synthesis

Trip computer

This menu allows you to adjust the volume for

the navigation instructions and choose the type

of voice (male or female).

This menu allows you vies information on the

state of the vehicle. You can choose between

the following functions:

For more information, refer to the "Audio and

telematics" section.

-

"Alert log"

List of active alerts.

-

"State of functions"

List of the state of functions (activated,

deactivated or faulty)

As a safety measure, configuration of

the multifunction screen by the driver

must only be done when stationary.

35

Multifunction screens

Monochrome screen C

Displays in the screen

Controls

Main menu

F

Press the "MENU" button for access to the

main menu:

-

audio functions,

trip computer (refer to the end of the

section),

This displays the following information:

From the audio equipment control panel, you

can:

-

personalisation-configuration,

telephone (hands-free kit).

-

time,

date,

F

press the "MENU" button for access to the

main menu,

Press the "5" or "6" buttons to select the

menu required, then confirm by pressing

the "OK" button.

ambient temperature (this flashes if there is

a risk of ice),

press the "5" or "6" buttons to scroll

through the items on the screen,

press the "MODE" button to change the

permanent application (trip computer,

audio source...),

-

state of the openings (doors, boot, etc.),

audio sources (radio, CD, USB port, etc.),

trip computer (refer to the end of the

section).

Warning messages or information messages

may appear temporarily. These can be cleared

by pressing the "Back" button.

F

press the "7" or "8" buttons to change a

setting value,

press the "OK" button to confirm,

F

or

F

press the "Back" button to abandon the

operation in progress.

36

Multifunction screens

"Audio functions"

menu

"Trip computer"

menu

2

With the audio equipment switched on, once

this menu has been selected you can activate

or deactivate the functions linked with use

of the radio (RDS, REG, RadioText), the CD

(introscan, shuffle, CD repeat) or the MP3

player (USB port).

Once this menu has been selected, you can

consult information concerning the status of the

vehicle (alert log, status of functions, etc.)

F

Press the "MENU" button for access to the

main menu.

Press the arrows, then the "OK" button to

select the "Trip computer" menu.

Alert log

This summarises the active warning messages,

displaying them in succession in the

multifunction screen.

For more information on the "Audio functions"

application, refer to the Audio system part of

the "Audio and telematics" section.

Status of functions

F

In the "Trip computer" menu, select one of

This summarises the status (active or inactive)

of the vehicle's functions.

the following applications:

Enter distance to

destination

This allows you to enter an approximate

distance until your final destination.

37

Multifunction screens

"Personalisation-

Configuration" menu

F

Press the "7" or "8" buttons to set the

value required (15, 30 or 60 seconds), then

press the "OK" button to confirm.

Once this menu has been selected, you can

gain access to the following functions:

-

define the vehicle parameters,

display configuration,

choice of language.

Example: setting of the duration of the guide-

me-home lighting

F

Press the "5" or "6" buttons, then

the "OK" button to select the menu

required.

Deﬁne the vehicle parameters

Once this menu has been selected, you can

activate or deactivate the following equipment:

-

wiper linked with reverse gear (refer to the

"Visibility" section),

daytime running lamps, (refer to the

"Visibility" section),

F

Press the "5" or "6" buttons, then

the "OK" button to select the "OK" box

and confirm or press the "Back" button to

cancel.

F

Press the "5" or "6" buttons, then

the "OK" button to select the "Guide-me-

home headlamps" line.

guide-me-home lighting

Using this menu, you can also reinitialise the

tyre under-inflation detection system (see the

"Safety" section).

38

Multifunction screens

Telephone menu

2

With the Audio system on and this menu

selected, you can configure your Bluetooth

hands-free system (pairing), view the various

telephone directories (calls log, services...) and

manage your calls (call, hang up, double call,

secret mode...).

Display conﬁguration

Choice of language

Once this menu has been selected, you can

gain access to the following settings:

Once this menu has been selected, you can

change the language used by the display, by

choosing a new language from the list offered.

-

brightness-video setting,

date and time setting,

selection of the units.

For more information on the "Telephone"

application, refer to the Audio system part in

the "Audio and telematics" section.

Once the fuel consumption unit has

been changed to mpg, the information

relating to speed and distance also

changes to miles.

As a safety measure, configuration of

the multifunction screen by the driver

must only be done when stationary.

Adjust the date and time

F

Select the "Date and time adjustment"

function using the "5" or "6" button.

Press the "OK" button to confirm the

selection.

Adjust the settings one by one using

the "7" or "8" button then confirm with

the "OK" button.

F

Then select the "OK" box in the screen

and then confirm.

39

Multifunction screens

Trip computer

System that gives you information on the current journey (range, fuel consumption…).

Monochrome screen A

The trip computer provides the following

F

The next press returns you to the current

information:

display.

-

range,

Zero reset

-

current fuel consumption,

Information displays

-

distance travelled,

-

average fuel consumption,

average speed.

F

Press the control for more than

two seconds to reset to zero the distance

travelled, the average fuel consumption

and the average speed.

F

Press the button, located at the end of the

wiper stalk, to display the various items of

trip computer data in succession.

40

Multifunction screens

2

Monochrome screen C

-

the trip "2" tab with:

● the distance travelled,

● the average fuel

consumption,

● the average speed,

for the second trip.

F

Pressing the button again returns you to

the normal display.

Information displays

F

Press the button, located at the end of

the wiper stalk, to display the various trip

computer tabs in succession:

-

the current information tab

with:

● the range,

● the current fuel

consumption,

Trip zero reset

F

When the trip required is displayed, press

the button on the end of the wiper stalk for

more than two seconds.

● the distance remaining to

be travelled.

-

the trip "1" tab with:

● the distance travelled,

● the average fuel

consumption,

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

● the average speed,

for the first trip.

41

Multifunction screens

Trip computer, a few definitions

Current fuel

consumption

Range

(miles or km)

Distance travelled

(miles or km)

(mpg or l/100 km or km/l)

Calculated over the last few seconds.

The distance which can still be

travelled with the fuel remaining

in the tank (related to the

average fuel consumption over

the last few miles (kilometres)

travelled).

Calculated since the last trip

computer reset.

Distance remaining to

destination

This function is only displayed from

20 mph (30 km/h).

(miles or km)

This value may vary following a change

in the style of driving or the relief,

resulting in a significant change in the

current fuel consumption.

This is the distance remaining to be

travelled to the final destination. It

is either calculated instantly by the

navigation system, if guidance is

activated, or entered by the user.

If the distance is not entered, dashes

are displayed in place of the digits.

Average fuel

consumption

(mpg or l/100 km or km/l)

Calculated since the last trip

computer reset.

When the range falls below 20 miles (30 km),

dashes are displayed. After filling with at least

5 litres of fuel, the range is recalculated and is

displayed when it exceeds 60 miles (100 km).

Average speed

(mph or km/h)

Calculated since the last trip

computer reset.

If dashes are displayed continuously

while driving in place of the digits,

contact a CITROËN dealer or a

qualified workshop.

42

Multifunction screens for Your Citroen C3 Picasso SUV Second Generation (2013-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals