Get Engine -> Auxiliary Equipment Drive Belt Guide for Citroen C3 SUV First Generation (2002-2009)

AUXILIARY EQUIPMENT DRIVE BELT

Petrol

Diesel

DV

TU

3

1

5

4

JP

JP4TD

TED4

8HW

Engine type

C3

HFX

X

KFV

X

NFU

X

8HX

X

8HV

X

8HYX

X

See

pages

:

53

52

AUXILIARY EQUIPMENT DRIVE BELT

Engines : HFX - KFV - NFU

Tools.

[1] Pliers for removing plastic pegs

[2] Belt tension measuring instrument

: 7504-T.

: 4122-T.

Vehicle without air conditioning.

Remove.

Refit.

Refit the belt.

Slacken:

Respect the following sequence:

- Crankshaft pinion.

- Alternator pulley.

Place tool [2] on the belt.

Tighten screw (1) to achieve a tension of:

55 ± 3 unités SEEM.

Tighten:

- Screw (2).

- Screw (3).

- Tensioning screw (1).

Push the alternator back towards the engine.

Remove the belt.

- Screw (3).

- Screw (2).

Remove tool [2] and complete the refitting.

B1BP2LSC B1BP2LTC

53

AUXILIARY EQUIPMENT DRIVE BELT

Engines : HFX - KFV - NFU

Vehicle with air conditioning.

Remove

Slacken:

- Screws (6), (4) and (5).

- Fully detension the belt by acting on the tensioner roller.

- Remove the accessories drive belt.

Refit.

Respect the following sequence:

- Crankshaft pinion.

- Aircon compressor pulley.

- Guide roller.

- Alternator pulley.

- Tensioner roller.

Place tool [2] on the belt.

- Tighten screw (5) to achieve a belt tension of:

120 ± 3 SEEM units.

- Tighten screws (4) and (6).

- Remove tool [2].

- Complete the refitting.

B1BP10VC B1BP10XC

54

AUXILIARY EQUIPMENT DRIVE BELT

With compressor and alternator

Engines : 8HX - 8HW

Tools

[1] Pliers for removing plastic pegs

[2] Tensioner roller compression lever

[3] Tensioner roller setting peg Ø4 mm

: 7504-T.

: (-).0194.E.

: (-).0194.F.

Removing.

Disconnect the battery negative cable.

Raise and support the vehicle, wheels hanging.

Remove the front RH wheel.

Move aside the splash-shield, using tool [1].

IMPERATIVE : In the case of belt re-use, mark the direc-

tion of rotation of the belt. If the index on the tensioner

roller is outside the marks, change the auxiliary equipment

drive belt.

Remove :

The alternator (1).

The aircon compressor (2).

Detension the auxiliary belt tensioner roller, using tool [2].

Position the peg [3]. Remove the auxiliary drive belt.

B1BP2MJD

B1BP2MKC

55

AUXILIARY EQUIPMENT DRIVE BELT

Engines : 8HX - 8HW

Markings on the dynamic tensioner roller.

"a"

"b"

Position of «maximum wear» of the auxiliary drive belt.

Normal position.

Refitting

NOTE : Check that the tensioner roller moves freely (no tight spot). If this is not the

case, replace the tensioner roller.

Respect the direction of fitting of the drive belt.

Complete the setting of the belt, of both sides, by means of the tensioner roller.

Make sure that the drive belt is correctly positioned in the «V» grooves of the various

pulleys.

Move the tool [2] on the tensioner roller to remove the peg [3].

B1EP18UD

56

AUXILIARY EQUIPMENT DRIVE BELT

Engines : 8HY - 8HV

Tools.

[1a] Dynamic tensioner roller lever

[1b] Lever extension

[2] Accessories belt roller locking peg Ø 4 mm

: (-).0194-E1.

: (-).0194-E2.

: (-).0194-F

Removing

Pivot the tensioner roller support (1) (clockwise), using tools [1a] and [1b] at «a».

Remove the belt.

Immobilise the support (1) of the tensioner roller, using tool [2].

Remove the auxiliary drive belt (2).

IMPERATIVE : Ensure that the tensioner rollers turn freely (no play, no tight spot).

Refitting

Reposer la courroie.

Move the tool [1] on the tensioner roller to remove the peg [2].

ESSENTIAL: Make sure that the belt is correctly positioned in the various pulley

grooves.

B1BP2MYD B1BP2MZC

57

Engine -> Auxiliary Equipment Drive Belt for Your Citroen C3 SUV First Generation (2002-2009)

Related Topics

Engine

Popular Owner Manuals

Latest Owner Manuals