Get General -> Operations to be Carried Out After a Repair Guide for Citroen C3 SUV First Generation (2002-2009)

OPERATIONS TO BE CARRIED OUT AFTER A REPAIR

IMPERATIVE : All these operations are to be performed following a reconnection of the battery.

Antiscanning function.

It is necessary to wait 1 minute after the battery has been disconnected in order to be able to start the vehicle.

Tailgate.

The opening of the tailgate is deactivated on reconnection of the battery.

Perform locking/unlocking to activate the opening of the tailgate.

Overspeed check.

The vehicle’s overspeed values have to be re-initialised.

The button on the wiper stalk operates the following functions:

- Activation of the vehicle’s overspeed function.

- Programming of the overspeed alert.

Electric windows

It is necessary to re-initialise the sequential and anti-pinch function

NOTE : If the window is open at the time the battery is reconnected, action the window switch several times to close it, then re-initialise.

Open the window fully.

Action and release the window switch until the window is completely closed.

This operation has to be carried out on each electric window.

OPERATIONS TO BE CARRIED OUT AFTER A REPAIR

Sun roof.

The anti-pinch function has to be re-initialised.

Place the sun roof switch in the maximum tilt position.

Keep the sun roof switch pressed until the sun roof ceases its movement.

Release the sun roof switch within 5 seconds.

Keep the sun roof switch pressed until the end of the sun roof opening sequence.

Multifunction screen.

It is necessary to adjust the date, time and outside temperature.

Adjust the display language of the multifunction screen if necessary.

NOTE : The default display language of the multifunction screen is French.

Navigation.

Vehicle location is only effective after some ten minutes.

Reprogramme the customer parameters.

Radio.

Reprogramme the radio stations.

General -> Operations to be Carried Out After a Repair for Your Citroen C3 SUV First Generation (2002-2009)