Comfort
Rear seats
Bench seat with fixed one-piece cushion and split backrest (right hand 2/3, left hand 1/3) to adjust the load space in the boot.
Rear head restraints
These have one position for use (up) and a
stowed position (down).
Folding the backrest
Repositioning the seat backrest
F
F
Move the corresponding front seat forward if necessary.
Check that the seat belt is positioned correctly on the
side of the seat backrest.
F
F
Straighten the seat backrest 2 and secure it.
Check that the red indicator, located next to
the control 1, is no longer visible.
F
Place the head restraints in the low position.
They can also be removed.
To remove a head restraint:
F
F
F
F
release the backrest using control 1,
tilt the backrest 2 slightly forwards,
pull the head restraint upwards to the stop,
then, press the lug A.
When repositioning the seat backrest,
take care not to trap the seat belts.
With passengers in the rear seats,
never drive with the head restraints
removed; they must be in place and
correctly adjusted.
F
F
Pull control 1 forwards to release the seat
backrest 2.
Fold the seat backrest 2 on to the cushion.
56
English 