Get Fittings Guide for Citroen C3 SUV Second Generation (2009-2016)

Fittings

Interior ﬁttings

1. Sun visor

or

Zenith windscreen

2. Illuminated glove box

(see details on following page)

3. Door pockets

4. Upper storage compartment

5. Lower storage compartment

with non-slip mat

6. USB port / Auxiliary socket

(see details on following page)

or

Coin holder

7. 12 V accessory socket

(see details on following page)

8. Centre armrest with storage

(see details on the following page)

or

Cup / bottle holder

82

Fittings

Zenith Windscreen

6

It has a manual blind to improve temperature

control in the passenger compartment and sun

visors to avoid dazzle.

Blind

Sun visors

F

To open the blind, take it by its central

F

Lower the sun visors to avoid dazzle.

grip A, then pull it backwards and guide it

to the desired position.

F

To close the blind, take it by its central

grip A, then pull it forwards and guide it to

the desired position.

do not attach or hang heavy objects to

the blind or its guide rails.

before moving the blind, the sun visors must be

in the folded position.

83

Fittings

Sun visor

Illuminated glove box

Centre armrest

This can be used to hold a water bottle.

Version without Zenith windscreen

Storage

The sun visors are fitted with a vanity mirror,

with concealing flap for the driver and a ticket /

card holder.

F

For access to the closed storage box, lift

the lever to open the lid.

For access to the open storage box below

the armrest, lift the complete armrest

towards the rear.

Its lid has a location for storing the vehicle's

handbook pack.

F

To open the glove box, raise the handle.

It is lit when the lid is opened.

It houses the front passenger's airbag

deactivation switch A.

Version with Zenith windscreen

Refer to the corresponding section.

depending on version, it may house a

ventilation nozzle B, distributing the same

conditioned air as the vents in the passenger

compartment.

These can be used for portable devices (mobile

phone, MP3 player...) which can be connected

to the USB port / auxiliary socket or charged

from the 12 V socket in the centre console.

84

Fittings

Auxiliary socket

USB Player

12 V accessory socket

The socket is located in the "AUX" box on the

centre console.

It permits the connection of a portable device,

such as a digital audio player of the iPod^®type,

to listen to your music files using the vehicle's

speakers.

The USb port is located in the "AUX" box on the

centre console.

It permits the connection of a portable device,

such as a digital audio player of the iPod^®

generation 5 and later type or USB memory stick

type.

6

F

To connect a 12 V accessory (max power:

120 W), lift the cover and connect a

suitable adaptor.

It reads the audio file formats (mp3, ogg, wma,

wav...) sent to your audio system and played via

the vehicle's speakers.

You can manage these files using the steering

mounted controls or the audio system control

panel and display them in the multifunction screen.

The connection of an electrical device

not approved by CITRoËn, such as a

USb charger, may adversely affect the

operation of vehicle electrical systems,

causing faults such as poor telephone

reception or interference with displays

in the screens.

The management of the files is done

using your portable device.

For more information on the use of this

equipment, refer to the "audio and telematics"

section.

When it is in use, the portable device

charges automatically.

For more information on the use of this

equipment, refer to the "audio and telematics"

section.

85

Fittings

Storage drawer

Mats

Reﬁtting

To refit the mat on the driver's side:

F

position the mat correctly,

refit the fixings by pressing,

check that the mat is secured correctly.

To avoid any risk of jamming of the

pedals:

The storage drawer is located under the

driver's seat.

Fitting

-

only use mats which are suited to

the fixings already present in the

vehicle; these fixings must be used,

never fit one mat on top of another.

When fitting the mat for the first time, on the

driver's side use only the fixings provided in the

wallet attached.

Opening

-

F

Raise the front of the drawer and pull it.

The use of mats not approved by

CITROËN may interfere with access to

the pedals and hinder the operation of

the cruise control / speed limiter.

The mats approved by CITRoËn have

two fixings located below the seat.

The other mats are simply placed on the

carpet.

Removal

F

Bring the drawer to the end of its travel.

Press the ends of the slides.

Raise the drawer and pull it fully.

Removal

To remove the mat on the driver's side:

F

move the seat as far back as possible,

unclip the fixings,

remove the mat.

Reﬁtting

F

Engage the drawer in its slides.

at the end of its travel, press on the top of

the drawer to secure it.

do not place heavy objects in the

drawer.

86

Fittings

Boot ﬁttings

1. Rear parcel shelf

(see following page for details)

2. Hooks

(see following page for details)

3. Location for Hi-Fi amplifier

4. Stowing rings

5. Storage box (version equipped with a

temporary puncture repair kit)

(see following page for details)

or

Tool box (version equipped with a spare

wheel)

6

(refer to the "Changing a wheel" section)

87

Fittings

Rear parcel shelf

Hooks

Storage box

F

Raise the boot carpet by pulling the strap

upwards to gain access to the storage box.

To remove the shelf:

The hooks can be used to hold shopping bags.

F

unhook the two cords,

raise the shelf slightly, then unclip it on

each side.

This has areas for storing a temporary puncture

repair kit, a box of spare bulbs, a first aid kit,

two warning triangles, ...

F

refit the boot floor carpet by folding it

slightly in the middle.

88

Fittings for Your Citroen C3 SUV Second Generation (2009-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals