Get Monitoring Guide for Citroen C3 SUV Second Generation (2009-2016)

Monitoring

Instrument panels - manual gearbox

Panel grouping together the vehicle operation indication dials and warning lamps.

Screen

Dials

1. Rev counter.

5. Display management button.

Servicing information.

A. Ambient temperature.

(°Celsius or °Fahrenheit)

B. Gear shift indicator.

Indicates the speed of rotation of the

engine (x 1 000 rpm).

2. Speedometer.

adjust the time and choose units.

Reset the service indicator.

C. Time.

Indicates the current speed of the moving

vehicle (mph or km/h).

3. Fuel gauge.

Indicates the quantity of fuel remaining in

the tank.

4. Screen.

6. Instrument panel lighting button.

adjusts the brightness of the lighting of the

instruments and controls.

D. Engine oil level indicator.

Appears a few seconds after switching on

the ignition, then disappears.

E. Trip computer.

F. Service indicator or Range related

to the AdBlue additive and the SCR

system (miles or km), then,

total mileage.

For more information, refer to the

section on the button or function and its

associated display.

These functions are displayed successively

when switching on the ignition.

10

Monitoring

1

Instrument panels - electronic or automatic gearboxes

Panel grouping together the vehicle operation indication dials and warning lamps. Depending on the version, the instrument panel may have permanent

back-lighting.

Screen

Dials

A. Speed limiter

(mph or km/h) or

Cruise control.

B. Gear shift indicator.

C. Electronic or automatic gearbox

information.

1. Rev counter.

5. Display management button.

Alternates display between range and trip

mileage recorder.

Indicates the speed of rotation of the

engine (x 1 000 rpm).

2. Speedometer.

Servicing information.

D. Range

Indicates the current speed of the moving

vehicle (mph or km/h).

3. Fuel gauge.

Indicates the quantity of fuel remaining in

the tank.

4. Screen.

Resets the selected function to zero (trip

distance recorder or service indicator).

6. Instrument panel lighting button.

adjusts the brightness of the lighting of the

instruments and controls.

(miles or km) or

Trip mileage recorder.

E. Service indicator

(miles or km), then

total mileage recorder.

These two functions are displayed

successively when switching on the ignition.

F. Engine oil level indicator.

Appears a few seconds after switching on

the ignition, then disappears.

For more information, refer to the

section on the button or function and its

associated display.

11

Monitoring

Indicator and warning lamps

Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault

(warning lamp).

When the ignition is switched on

Associated warnings

Certain warning lamps may come on

in one of two different modes. Only by

relating the type of illumination to the

operating status of the vehicle can it

be ascertained whether the situation is

normal or whether a fault has occurred.

Certain warning lamps come on for a few

seconds when the vehicle's ignition is

switched on.

When the engine is started, these same

warning lamps should go off.

The illumination of certain warning lamps may

be accompanied by an audible signal and a

message in the multifunction screen.

The warning lamps may come on continuously

(fixed) or flash.

If they remain on, before moving off, refer to the

information on the warning lamp concerned.

Operation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has

come into operation.

Warning/indicator lamp

is on

Cause

Action / Observations

Left-hand direction flashing with buzzer.

The lighting stalk is pushed down.

indicator

Right-hand

flashing with buzzer.

The lighting stalk is pushed up.

direction indicator

Hazard warning

lamps

flashing with audible

signal.

The hazard warning lamps switch,

located on the dashboard, has been

operated.

The left-hand and right-hand direction indicators and

their associated indicator lamps flash simultaneously.

Sidelamps

fixed.

The lighting stalk is in the

"Sidelamps" position.

12

Monitoring

1

Warning/indicator lamp

is on

Cause

Action / Observations

Dipped beam

headlamps

fixed.

The lighting stalk is in the "dipped

beam headlamps" position.

Main beam

headlamps

fixed.

The lighting stalk is pulled towards

you.

Pull the stalk to return to dipped beam headlamps.

Front foglamps

The front foglamps are switched on

using the ring on the lighting control

stalk.

Turn the ring on the lighting control stalk rearward

twice to switch off the front foglamps.

Rear foglamps

fixed.

The rear foglamps are on.

Turn the ring on the stalk rearward to switch off the

rear foglamps.

Diesel engine

pre-heating

The key is at position 2 (ignition on) in Wait until the warning lamp goes off before starting.

the ignition switch.

The period of illumination of the warning lamp is

determined by the ambient conditions (up to about

thirty seconds in very low temperatures).

If the engine does not start, switch the ignition off and

then on, wait until the warning lamp goes off again,

then start the engine.

Parking brake

fixed.

The parking brake is applied or not

properly released.

Release the parking brake to switch off the warning

lamp, keeping your foot on the brake pedal.

observe the safety recommendations.

For more information on the parking brake, refer to the

corresponding section.

13

Monitoring

Warning/indicator lamp

is on

Cause

Action / Observations

Engine coolant

temperature

fixed blue.

on starting the engine, it indicates

that the engine is cold.

After a few minutes driving, it swiches off to indicate

that the engine temperature is normal.

In order to protect your engine, avoid driving too hard

until the warning lamp has switched off.

Stop & Start

fixed.

When the vehicle stops (red lights,

The warning lamp goes off and the engine restarts

traffic jams, ...) the Stop & Start system automatically in START mode, as soon as you want to

has put the engine into SToP mode.

move off.

flashes for a few

seconds, then

goes off.

SToP mode is temporarily

unavailable.

or

For more information on special cases with STOP

mode and STaRT mode, refer to the "Stop & Start"

section.

STaRT mode is invoked

automatically.

14

Monitoring

1

Warning/indicator lamp

is on

Cause

Action / Observations

Foot on the

brake pedal

fixed.

The brake pedal must be pressed.

With an electronic gearbox, press the brake pedal to

start the engine (lever in position N).

With an automatic gearbox, with the engine running,

press the brake pedal before releasing the parking

brake, to unlock the lever and come out of position P.

If you wish to release the parking brake without

pressing the brake pedal, this warning lamp will

remain on.

flashing.

With an electronic gearbox, if you

hold the vehicle on an incline using

the accelerator for too long, the

clutch overheats.

Use the brake pedal and/or the parking brake.

Automatic

wiping

fixed.

The wiper control is pushed

downwards.

Automatic front wiping is activated.

15

Monitoring

Deactivation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.

This is may be accompanied by an audible signal and a message in the multifunction screen.

Warning/indicator lamp

is on

Cause

Action / Observations

Passenger's

fixed.

The control, located in the glove box, Set the control to the ON position to activate the

airbag system

is set to the OFF position.

The passenger's front airbag is

deactivated.

passenger's front airbag.

In this case, do not fit a child seat in the rearward

facing position.

You can install a rearward facing

child seat, unless there is a fault with

the operation of the airbags (Airbag

warning lamp on).

Dynamic

stability control

(DSC/ASR)

fixed.

The button, located at the bottom

left of the dashboard, is pressed. Its

indicator lamp is on.

The dSC/aSR is deactivated.

dSC: dynamic stability control.

aSR: anti-slip regulation.

Press the button to activate the dSC/aSR. Its

indicator lamp goes off.

The DSC/ASR system is activated automatically when

the vehicle is started.

If deactivated, the system is reactivated automatically

from around 30 mph (50 km/h).

16

Monitoring

Warning lamps

1

Any fault resulting in the illumination of a warning lamp must be investigated further by

reading the associated message in the multifunction screen.

If you encounter any problems, do not hesitate to contact a CITROËN dealer or a qualified workshop.

When the engine is running or the vehicle is

being driven, the illumination of one of the

following warning lamps indicates a fault which

requires action on the part of the driver.

Warning/indicator lamp

STOP

is on

Cause

Action / Observations

fixed, alone or

Illumination of the warning lamp is

associated with a serious braking

system or engine coolant temperature Park, switch off the ignition and call a CITROËN

Stop as soon as it is safe to do so as the engine may

cut out when driving.

associated with

another warning

lamp, accompanied

by an audible signal

and a message in the

screen.

problem.

dealer or a qualified workshop.

Service

temporarily.

Minor problems have occurred for

which there is no specific warning

lamp.

Identify the problem by reading the message shown in the

screen, such as, for example:

-

the engine oil level,

the screenwash level,

the remote control battery,

saturation of the particle filter on diesel vehicles

(refer to the "Particle filter (Diesel)" section).

For any other faults, contact a CITRoËn dealer or a qualified

workshop.

fixed.

Major problems have occurred for

which there is no specific warning

lamp.

Identify the problem by reading the message shown

in the screen and contact a CITRoËn dealer or a

qualified workshop.

17

Monitoring

Warning/indicator lamp

Braking

is on

Cause

Action / Observations

fixed, associated with

the STOP warning

lamp.

The braking system fluid level is too

low.

You must stop as soon as it is safe to do so.

Top up with brake fluid recommended by CITROËN.

If the problem persists, have the system checked by a

CITROËN dealer or a qualified workshop.

+

fixed, associated with

the SToP and abS

warning lamps.

The electronic brake force distribution You must stop as soon as it is safe to do so.

(EBFD) system has a fault.

Have it checked by a CITRoËn dealer or a qualified

workshop.

Anti-lock

Braking System

(ABS)

fixed.

The anti-lock braking system has a

fault.

The vehicle retains conventional braking.

drive carefully at reduced speed and contact a

CITROËN dealer or a qualified workshop without

delay.

Dynamic

stability control

(DSC/ASR)

flashing.

The dSC/aSR regulation is

operating.

The system optimises traction and improves the

directional stability of the vehicle in the event of loss of

grip or trajectory.

fixed.

The dSC/aSR system has a fault.

Have it checked by a CITRoËn dealer or a qualified

workshop.

Engine

flashing.

The engine management system has Risk of destruction of the catalytic converter.

autodiagnosis

system

a fault.

Have it checked by a CITRoËn dealer or a qualified

workshop.

fixed.

The emission control system has a

fault.

The warning lamp should go off when the engine is started.

If it does not go off, contact a CITRoËn dealer or

qualified workshop without delay.

18

Monitoring

1

Warning/indicator lamp

Low fuel level

is on

Cause

Action / Observations

fixed.

When it first comes on there remains You must refuel as soon as possible to avoid running

approximately 5 litres of fuel in the out of fuel.

tank.

This warning lamp will come on every time the ignition

is switched on, until a sufficient addition of fuel is

made.

Fuel tank capacity: approximately 50 litres (petrol),

46 litres (Diesel) or 37 litres (LPG); depending on

version: approximately 30 litres (petrol or Diesel).

never continue to drive until you run out of fuel as

this could damage the emission control and injection

systems.

Maximum coolant fixed.

temperature

The temperature of the cooling

system is too high.

Stop as soon as it is safe to do so.

Wait until the engine has cooled down before topping

up the level, if necessary.

If the problem persists, contact a CITRoËn dealer or

qualified workshop.

Engine oil

pressure

fixed.

There is a fault with the engine

lubrication system.

You must stop as soon it is safe to do so.

Park, switch off the ignition and contact a CITROËN

dealer or a qualified workshop.

Battery charge

The battery charging circuit has a

The warning lamp should go off when the engine is

fault (dirty or loose terminals, slack or started.

cut alternator belt, ...). If it does not go off, contact a CITRoËn dealer or a

qualified workshop.

19

Monitoring

Warning/indicator lamp

Door(s) open

is on

Cause

Action / Observations

fixed if the speed is

a door or the boot is still open.

Close the door or boot.

below 6 mph (10 km/h).

fixed and accompanied

by an audible signal

if the speed is above

6 mph (10 km/h).

Airbags

temporarily.

This lamp comes on for a few

seconds when you turn on the

ignition, then goes off.

This lamp should go off when the engine is started.

If it does not go off, contact a CITRoËn dealer or a

qualified workshop.

fixed.

one of the airbag or seat belt

Have it checked by a CITRoËn dealer or a qualified

pretensioner systems has a fault.

workshop.

Seat belt not

fastened /

unfastened

fixed then flashing

accompanied by an

increasing audible

signal.

The driver and/or the front passenger Pull the strap then insert the tongue in the buckle.

has not fastened or has unfastened

their seat belt.

Power steering

fixed.

The power steering has a fault.

drive carefully at reduced speed.

Have it checked by a CITRoËn dealer or a qualified

workshop.

20

Monitoring

1

Warning/indicator lamp

Water in Diesel

is on

Cause

Action / Observations

fixed.

The Diesel fuel filter contains water.

Risk of damage to the injection system on diesel

engines.

Contact a CITROËN dealer or a qualified workshop

without delay.

Particle

emissions filter

(Diesel)

fixed, accompanied by This indicates that the particle

As soon as driving conditions allow, regenerate the

filter by driving at a speed of at least 35 mph (60 km/h)

until the warning lamp goes off (see the "Checks -

Particle emissions filter" section).

an audible signal.

emissions filter is starting to become

saturated.

fixed, accompanied by This indicates the low level of the

an audible signal. additive reservoir.

Have the reservoir topped up as soon as possible by

a CITROËN dealer or a qualified workshop (see the

"Checks - Additive level" section).

Under-inflation

fixed, accompanied by The pressure in one or more tyres is

Check the tyre pressures as soon as possible.

This check should preferably be carried out when the

tyres are cold.

an audible signal and

a message.

too low.

You must reinitialise the system after the adjustment

of one or more tyre pressures and after changing one

or more wheels.

For more information, refer to the "Under-inflation

detection" section.

+

flashing then fixed,

accompanied by the

Service warning lamp.

The system has fault: the tyre

pressures are no longer monitored.

Check the tyre pressures as soon as possible.

Have the system checked by a CITRoËn dealer or a

qualified workshop.

21

Monitoring

Warning/indicator lamp

is on

Cause

Action / Observations

AdBlue^®additive fixed, on switching

(BlueHDi Diesel) on the ignition,

accompanied by an

The remaining driving range is

between 350 miles (600 km) and

1500 miles (2400 km).

Have the adblue^®additive tank topped up as soon

as possible: go to a CITRoËn dealer or a qualified

workshop, or carry out this operation yourself by

referring to the corresponding section.

audible signal and a

message indicating the

remaining driving range.

+

flashing associated with The remaining driving range is

You must top-up the adblue^®additive tank to avoid

a breakdown: go to a CITRoËn dealer or a qualified

workshop, or carry out this operation yourself by

referring to the corresponding section.

the SERVICE warning

lamp, accompanied by

an audible signal and a

message indicating the

remaining driving range.

between 0 and 350 miles (600 km).

flashing, associated

with the SERVICE

warning lamp,

accompanied by an

audible signal and a

message indicating that

starting is prevented.

The adblue^®tank is empty: the

starting inhibition system required

by legislation prevents starting of the

engine.

To be able to start the engine, you must top-up the

adblue^®additive tank: go to a CITRoËn dealer or a

qualified workshop, or carry out this operation yourself

by referring to the corresponding section.

It is essential to add at least 3.8 litres of AdBlue^®to

the additive tank.

22

Monitoring

1

Warning/indicator lamp

is on

Cause

Action / Observations

SCR emissions

control system

fixed, on switching on the ignition, A fault with the SCR emissions

associated with the SERVICE control system has been detected.

This alert disappears once the exhaust

emissions return to normal levels.

+

(BlueHDi Diesel) and engine diagnostic warning

lamps, accompanied by an

audible signal and a message.

flashing, on switching on

the ignition, associated with

the SERVICE and engine

diagnostic warning lamps,

accompanied by an audible

signal and a message

indicating the remaining

driving range.

After confirmation of the fault with the Contact a CITRoËn dealer or a qualified

emissions control system, you can

drive for up to 650 miles (1 100 km)

before the engine starting inhibition

system is triggered.

workshop without delay, to avoid a

breakdown.

flashing, on switching on

the ignition, associated with

the SERVICE and engine

diagnostic warning lamps,

accompanied by an audible

signal and a message.

You have exceeded the authorised

driving limit following confirmation

of a fault with the emissions control

system: the engine starting inhibition

system prevents starting of the

engine.

To be able to start the engine, you must

call on a CITRoËn dealer or a qualified

workshop.

23

Monitoring

Service indicator

More than 1 800 miles (3 000 km)

remain before the next service is due

Less than 600 miles (1 000 km)

remain before the next service is due

When the ignition is switched on, no service

information appears in the screen.

Example: 560 miles (900 km) remain before

the next service is due.

For 5 seconds after the ignition is switched on,

the screen indicates:

Between 600 miles (1 000 km)

and 1 800 miles (3 000 km) remain

before the next service is due

For 5 seconds after the ignition is switched on, the

spanner symbolising the service operations comes

on. The distance recorder display line indicates the

distance remaining before the next service is due.

Example: 1 739 miles (2 800 km) remain before

the next service is due.

System which informs the driver when the

next service is due, in accordance with the

manufacturer's servicing schedule.

5 seconds after the ignition is switched on,

the distance recorder resumes its normal

operation. The spanner remains on to

indicate that a service must be carried out

soon.

For 5 seconds after the ignition is switched on, the

screen indicates:

The point at which the next service is due is

calculated from the last indicator zero reset,

depending on the distance travelled and the

time elapsed since the last service.

5 seconds after the ignition is switched on,

the spanner goes off; the distance recorder

resumes its normal operation. The screen then

indicates the total distance.

For blueHdi diesel versions, the

degree of deterioration of the engine oil

is also taken into account (depending

on the country of sale).

24

Monitoring

1

Service overdue

For 5 seconds after the ignition is switched

on, the spanner flashes to indicate that

the service must be carried out as soon as

possible.

The distance remaining may be

weighted by the time factor, depending

on the driving conditions.

Therefore, the spanner may also come

on if you have exceeded the period

since the last service, indicated in the

manufacturer's service schedule.

For blueHdi diesel versions, the

spanner may also be brought on earlier

than expected, depending on the

degree of deterioration of the engine oil

(depending on the country of sale).

The rate of deterioration of the engine

oil depends on the driving conditions in

which the vehicle is used.

Example: the service is overdue by 186 miles

(300 km).

For 5 seconds after the ignition is switched on,

the screen indicates:

5 seconds after the ignition is switched on,

the distance recorder resumes its normal

operation. The spanner remains on.

For blueHdi diesel versions, this alert

may also be accompanied by the fixed

illumination of the service warning lamp

when the ignition is on.

25

Monitoring

Following this operation, if you wish to

disconnect the battery, lock the vehicle

and wait at least five minutes for the

zero reset to be taken into account.

Service indicator zero reset

after each service, the service indicator must

be reset to zero.

The procedure for resetting to zero is as

follows:

Retrieving the service

information

You can access the service information at any

time.

F

Press the trip distance recorder zero reset

button.

F

switch off the ignition,

press and hold the trip distance recorder

zero reset button,

The service information is displayed for a

few seconds, then disappears.

F

switch on the ignition; the distance recorder

display begins a countdown,

when the display indicates "=0", release

the button; the spanner disappears.

26

Monitoring

1

Engine oil level

indicator*

Oil level correct

Oil level indicator fault

This is signaled by the flashing of "OIL--".

Contact a CITRoËn dealer or a qualified

workshop.

In the event of a fault with the electric oil level

indicator, the engine oil level is no longer

monitored.

While the system is faulty, you should check

the engine oil level using the manual dipstick

located under the bonnet.

Oil level low

On vehicles fitted with an electric oil level

indicator, information on the oil level is

displayed in the instrument panel for a few

seconds when the ignition is switched on, after

the service information.

Refer to the "Checking levels" section.

This is indicated by the flashing of "OIL",

accompanied by illumination of the service

warning lamp, an audible signal and a

message.

If the low oil level is confirmed by a check using

the dipstick, the level must be topped up to

prevent damage to the engine.

The level shown will only be correct if

the vehicle is on level ground and the

engine has been off for more than

30 minutes.

Refer to the "Checking levels" section.

* depending on version.

27

Monitoring

Distance recorders

Clock

The total and trip distances are displayed for

thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

When travelling abroad, you may

have to change the units of distance:

the display of road speed must be in

the official units (miles or km) for the

country. The change of units is done via

the screen configuration menu, with the

vehicle stationary.

Adjusting the time - Choice of

units

To adjust the time of the clock and choose the

units used by the screen, use the right-hand

button on the instrument panel, carrying out the

operations in the following order:

Total distance recorder

It measures the total distance travelled by the

vehicle since its first registration.

F

press the button for more than two seconds:

the minutes flash,

F

press the button to increase the minutes,

press the button for more than two seconds:

the hours flash,

F

press the button to increase the hours,

press the button for more than two seconds:

24H or 12H is displayed,

F

press the button to select 24H or 12H,

press the button for more than two seconds:

°C or °F is displayed,

press the button to select °C or °F,

press the button for more than two seconds

to complete the adjustments.

Trip distance recorder

It measures the distance travelled since it was

F

reset to zero by the driver.

F

With the ignition on, press the button until

zeros appear.

After approximately 30 seconds without any

action, the screen returns to the normal display.

28

Monitoring

1

Lighting dimmer

System for manual adjustment of the

brightness of the instruments and controls to

suit the ambient light level.

Black panel

(comfort night driving

display)

When driving at night, this function allows

certain displays in the instrument panel to be

switched off so as to reduce fatigue for the

driver.

The essential driving information, such as the

speed of the vehicle, warning lamps, cruise

control or speed limiter information, remain

displayed in the instrument panel.

Activation

F

With the lighting on, press the left hand

button of the instrument panel several

Activation

When the lighting is on:

times to progressively reduce the

dashboard lighting level.

F

press the button to change the brightness

of the instruments and controls,

F

Press the button again to reduce the

lighting to the minimum level and switch off

the interior mood lighting.

Press the button again to activate the black

panel.

F

when the level of brightness required is

reached, release the button.

Deactivation

When the lighting is off, or in day mode on

vehicles fitted with daytime running lamps,

pressing the button does not have any effect.

29

Monitoring

Trip computer

current journey (range, fuel consumption…).

System that gives you information on the

-

distance travelled,

average fuel consumption,

average speed.

Screen in the instrument panel

Information displays

F

Press the button, located at the end of the

wiper stalk, to display the various items of

trip computer information in succession.

-

F

The next press then returns you to the

The trip computer provides the following

normal display.

information:

Monochrome screen A

-

range,

-

current fuel consumption,

Zero reset

the Stop & Start time counter*,

F

Press the control for more than two

seconds to reset to zero the distance

travelled, the average fuel consumption

and the average speed.

* Available only with the monochrome screen A.

30

Monitoring

1

Monochrome screen C

-

the current information tab

with:

● the range,

● the current fuel

consumption,

● the distance remaining to

be travelled or the

Stop & Start time counter.

-

the trip "1" tab with:

● the distance travelled,

● the average fuel

consumption,

● the average speed,

for the first trip.

Zero reset

F

When the trip required is displayed, press

the button on the end of the wiper stalk for

more than two seconds.

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

Information displays

F

Press the button, located at the end of

the wiper stalk, to display the various trip

computer tabs in succession:

-

the trip "2" tab with:

● the distance travelled,

● the average fuel

consumption,

● the average speed,

for the second trip.

F

Pressing the button again returns you to

the normal display.

31

Monitoring

Touch screen tablet

-

The current fuel consumption tab

with:

● the range,

● the current fuel consumption,

● the Stop & Start time counter.

-

The trip "1" tab with:

● the distance travelled.

● the average fuel consumption,

● the average speed,

for the first trip.

Information display

Trip reset

F

Press MENU button, then select "Driving"

to display the various tabs.

F

When the desired trip is displayed, press

the reset button.

F

Select the desired tab using your finger.

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

-

The trip "2" tab with:

● the distance travelled.

● the average fuel consumption,

● the average speed,

for the second trip.

32

Monitoring

1

Trip computer, a few definitions

Range

(miles or km)

Current fuel consumption

(mpg or l/100 km or km/l)

Distance travelled

(miles or km)

Calculated since the last trip

computer reset.

The distance which can still be

travelled with the fuel remaining

in the tank (related to the

average fuel consumption over

the last few miles (kilometres)

travelled).

Calculated over the last few seconds.

This function is only displayed from

20 mph (30 km/h).

Distance remaining to

destination

(miles or km)

This value may vary following a change

in the style of driving or the relief,

resulting in a significant change in the

current fuel consumption.

This is the distance remaining to be

travelled to the final destination. It

can be entered by the user.

If the distance is not entered, dashes

are displayed in place of the digits.

Average fuel

consumption

(mpg or l/100 km or km/l)

Calculated since the last trip

computer reset.

When the range falls below 20 miles (30 km),

dashes are displayed. After filling with at least

5 litres of fuel, the range is recalculated and is

displayed when it exceeds 60 miles (100 km).

Stop & Start time counter

(minutes / seconds or hours /

minutes)

If your vehicle is fitted with Stop &

Start, a time counter calculates the

time spent in SToP mode during a

journey.

Average speed

(mph or km/h)

Calculated since the last trip

computer reset.

If dashes are displayed continuously

while driving in place of the digits,

contact a CITRoËn dealer or a

qualified workshop.

It resets to zero every time the

ignition is switched on with the key.

33

Monitoring for Your Citroen C3 SUV Second Generation (2009-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals