Visibility
LEd daytime running lamps
Headlamp
adjustment
Allowing the signature of the vehicle to be identified, this daytime external lighting comprises two
sets of light emitting diodes (LEDs), located below each front lamp unit.
Setting
For countries where exterior lighting by day is
not a legal requirement, you can activate or
deactivate the function via the multifunction
screen configuration menu.
In countries where daytime lamps
are a legal requirement:
-
-
-
this function is activated by default;
it cannot be deactivated,
on starting the vehicle, in daylight the LEd
lamps come on automatically, if the lighting
stalk is in position "0" or "AUTO".
If the sidelamps and headlamps are switched
on manually or automatically, the LEd lamps
switch off.
To avoid causing a nuisance to other road
users, the height of the headlamps should be
adjusted in relation to the load in the vehicle.
0. driver only or driver + front passenger.
-. Intermediate setting
in daylight, the sidelamps and
number plate lamps also come on,
If the sidelamps or headlamps
are switched on manually or
automatically, the LEd lamps
switch off.
1. 5 people.
-. 5 people + load in the boot.
2. Driver only + maximum authorised load in
the boot.
This position is sufficient to avoid causing
dazzle.
In these countries, for versions
not fitted with LED daytime
running lamps, it is the dipped
beam headlamps that come on
automatically on starting the vehicle.
Higher settings may limit the spread of light
from the headlamps.
The initial setting is position "0".
76
English 