Driving
– Send the vehicle's GPS coordinates to a
smartphone.
– Record videos automatically in the event of a
vehicle impact.
On/Off
For safety reasons, the driver must not
use the CITROËN ConnectedCAM®
application from a smartphone while driving.
He or she must perform any action requiring
sustained attention when the vehicle is
stationary.
► Press and hold this button to switch
the camera on/off (confirmed by the
indicator lamp coming on/going off).
When the camera is switched on, video
recording is automatic and permanent.
The status of the function is stored when the
ignition is switched off.
As the use of the CITROËN
ConnectedCAM® is under your control
and your responsibility, you must comply with
the regulations for the protection of personal
data (images of other people, vehicle number
plates, protected buildings, etc.). Check first
that your insurance company accepts the
footage collected from the CITROËN
ConnectedCAM® as evidence.
Malfunction
When a system fault occurs, the indicator
lamp in the button flashes.
Managing photos and videos
► Press this button briefly to take a
photo.
An audible signal confirms that the request has
been acknowledged.
Have the system checked by a CITROËN dealer
or a qualified workshop.
► Press and hold this button to record a
video.
A micro USB socket also allows the data from
the camera to be saved onto other media such
as computers, tablets, etc.
Driving and manoeuvring
aids - General
recommendations
Without exception, any action which the
driver takes concerning the camera must
be with the vehicle stationary.
Thanks to the CITROËN ConnectedCAM®
application, you can then automatically and
immediately share your photos and videos on
social networks or by email.
An audible signal confirms that the request has
been acknowledged.
Driving and manoeuvring aids cannot, in
any circumstances, replace the need for
vigilance on the part of the driver.
The driver must comply with the Highway
Code, must remain in control of the vehicle in
all circumstances and must be able to retake
control of it at all times. The driver must adapt
the speed to climactic conditions, traffic and
the state of the road.
It is the driver's responsibility to constantly
check the traffic, to assess the relative
distances and speeds of other vehicles and to
anticipate their movements before indicating
and changing lane.
Operation
To use all camera functions, you must perform
the following operations:
► Download the CITROËN
ConnectedCAM® application onto a
smartphone.
► Pair the smartphone with the camera
following the instructions given by the
application.
Pairing is necessary at the first connection. After
this it will be automatic.
Resetting the system
► Press and hold these 2 buttons
simultaneously to reset the
system.
This action erases all data recorded in the
camera and reinitialises the camera’s default
pairing code.
The default pairing code is: “ConnectedCAM”.
82
English 