Advertisement

Advertisement

CITRO?N Connect Radio -> First steps for Your Citroen C4 Cactus SUV Second Generation (2018-2024)

CITROËN Connect Radio  
applications interrupt their display while the  
vehicle is moving).  
– Changing the system settings and  
configuration.  
At all times it is possible to display the rolling  
menus by pressing the screen briefly with three  
fingers.  
All of the touch areas of the screen are white.  
For pages with multiple tabs at the bottom of the  
screen, it is possible to switch between pages  
either by tapping the tab for the desired page, or  
by using a finger, sliding the pages to the left or  
to the right.  
CITROËN Connect Radio  
The system is protected in such a way  
that it will only operate in the vehicle.  
The Energy Economy Mode message is  
displayed when the system is about to enter  
the corresponding mode.  
Press in the grey zone to go back up a level or  
to confirm.  
Press the back arrow to go back a level or  
confirm.  
The system’s Open Source Software  
(OSS) source codes are available at the  
following addresses:  
Multimedia audio system -  
Applications - Bluetooth®  
telephone  
The touch screen is of the "capacitive"  
type.  
To clean the screen, use a soft, non-abrasive  
cloth (e.g. spectacles cloth) with no additional  
product.  
The functions and settings described  
vary according to the vehicle version and  
configuration.  
Do not use sharp objects on the screen.  
Do not touch the screen with wet hands.  
First steps  
With the engine running, a press mutes  
the sound.  
Certain information is displayed permanently in  
the upper bar of the touch screen:  
– Air conditioning status information (depending  
on version), and direct access to the  
corresponding menu.  
– Radio Media and Telephone menu status  
information.  
– Privacy status information.  
– Access to the touch screen and digital  
instrument panel settings.  
Audio source selection (depending on  
equipment):  
For safety reasons and because they  
require sustained attention by the driver,  
the following operations must be carried out  
with the vehicle stationary and the ignition  
on:  
– Pairing the smartphone with the system in  
Bluetooth mode.  
– Using the smartphone.  
With the ignition off, a press turns the system on.  
Increase or decrease the volume using  
the wheel or the "plus" or "minus" buttons  
(depending on the equipment).  
Use the buttons on either side of or below the  
touch screen for access to the menus, then  
press the virtual buttons in the touch screen.  
Depending on the model, use the "Source" or  
"Menu" buttons on the left of the touch screen  
for access to the menus, then press the virtual  
buttons in the touch screen.  
– Connection to the CarPlay®, MirrorLinkTM  
or Android Auto applications (certain  
132