Get Driving -> Cruise control Guide for Citroen C4 Cactus SUV Second Generation (2018-2024)

Driving

– in an urban area with the risk of

pedestrians crossing the road,

– in heavy traﬃc,

Switching oﬀ the ignition cancels any

speed setting.

Information displayed on

the instrument panel

– on winding or steep roads,

– on slippery or ﬂooded roads,

– in unfavourable climatic conditions,

– driving on a speed circuit,

– driving on a rolling road,

– use of snow chains, non-slip covers or

studded tyres.

Steering mounted control

Cruise control

6. Cruise control pause/resume indication.

7. Programmed speed setting value.

8. Cruise control mode selection indication.

1. ON (CRUISE position) / OFF (position 0)

2. Activation of cruise control at the current

speed / decrease speed setting

3. Activation of cruise control at the current

speed / increase speed setting

4. Pausing / resumption of cruise control with

the speed setting previously stored

5. Use the speed suggested by the Speed Limit

Recognition and Recommendation (MEM

display)

Refer to the General recommendations on the

use of driving and manoeuvring aids and to

Cruise control - particular recommendations.

This system automatically keeps the

vehicle’s speed at the cruise value

programmed by the driver (speed setting),

without using the accelerator pedal.

The cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

Switching on/pausing

► Turn thumbwheel 1 to the "CRUISE" position

to select cruise control mode; the function is

paused.

► Press button 2 or 3 to activate cruise control

and save a speed setting when the vehicle has

reached the desired speed; the vehicle’s current

speed is saved as the speed setting.

► Release the accelerator pedal.

► Pressing button 4 temporarily pauses the

function.

With a manual gearbox, third gear or higher must

be engaged.

With an automatic gearbox, second gear or

higher must be engaged.

For more information on the Speed Limit

Recognition and Recommendation, refer to

the corresponding section.

The cruise control remains active after

changing gear, regardless of the gearbox

type, on engines ﬁtted with Stop & Start.

► Pressing button 4 again restores operation of

the cruise control (ON).

Driving

Operation of the cruise control can also

be paused temporarily:

– by pressing the brake pedal.

– automatically, if the electronic stability

control (ESC) system is triggered.

► Press button 5 again to save the suggested

speed.

The value is immediately shown as the new

speed setting on the instrument panel.

Switching oﬀ

► Turn the thumbwheel 1 to the "0” position: the

cruise control information disappears from the

screen.

Temporarily exceeding the

programmed speed

If needed (when overtaking, for example) it is

possible to exceed the programmed speed by

pressing the accelerator pedal.

Cruise control is temporarily overridden and the

programmed speed setting ﬂashes.

To return to the programmed speed, simply

release the accelerator pedal.

Once the vehicle has returned to the

programmed speed, cruise control takes over

again and the programmed speed setting stops

ﬂashing.

Malfunction

Modifying the cruise speed

setting

Cruise control must be active.

To modify the cruise speed setting, based on the

current speed of the vehicle:

► Brieﬂy press button 2 or 3 to change the

value in steps of + or - 1 mph (km/h).

► Press and hold button 2 or 3 to change the

value in steps of + or - 5 mph (km/h).

The display of dashes (ﬂashing then ﬁxed)

indicates a malfunction with the cruise control

system.

Have it checked by a CITROËN dealer or a

qualiﬁed workshop.

Pressing and holding button 2 or

3 results in a rapid change in the speed

of the vehicle.

When descending a steep hill, the cruise

control system cannot prevent the

vehicle from exceeding the programmed

speed.

You may have to brake to control the speed of

your vehicle. In this case, the cruise control is

automatically paused.

To activate the system again, with the vehicle

speed above 25 mph (40 km/h), press button

Active Safety Brake with

Collision Risk Alert and

Intelligent emergency

braking assistance

As a precaution, we recommend setting

a cruise speed fairly close to the current

speed of your vehicle, to avoid any sudden

acceleration or deceleration of the vehicle.

To change the cruise speed setting using the

speed suggested by the Speed Limit Recognition

and Recommendation:

► The suggested speed is displayed on the

instrument panel.

Refer to the General recommendations on the

use of driving and manoeuvring aids.

► Press button 5 once; a message is displayed,

conﬁrming the memorisation request.

This system:

Driving -> Cruise control for Your Citroen C4 Cactus SUV Second Generation (2018-2024)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals