Instruments
of road speed must be in the official units
(miles or km) for the country.
The change of units is done via the screen
configuration menu, with the vehicle
stationary.
Lighting dimmer
Used to manually adjust the brightness of the
instruments and controls to suit the exterior light
level.
It only works when the vehicle’s lamps
(other than daytime running lamps) are
on, and in night mode.
Total distance recorder
This function can be accessed through the touch
screen.
► Select the “Settings” menu.
► Then, press the “Brightness” button.
Or
► Select the “Configuration” menu.
This recorder measures the total distance
travelled by the vehicle since its initial
registration.
► Then, press the “Screen configuration”
button and select the “Brightness” tab.
► Adjust the brightness by using the arrows or
moving the slider.
Trip distance recorder
It measures the distance travelled since it was
reset by the driver.
This function can be accessed by the touch
screen’s trip computer.
► In the "Applications" menu, select the
"Vehicle Application“ tab, then "Trip
Computer".
The brightness can be adjusted
differently for day mode (lighting control
stalk in position "0") and night mode (lighting
control stalk in any other position).
► Select the trip "1" or trip "2“ tab.
► To reset the trip recorder to zero, press the
“Reset“ button or the end of the wiper control
stalk until zeros appear.
16
English 