C O M F O R T
Storing a position
Recalling a stored position
Ignition on or engine running
Briefly press button 1 or 2 to re-
Storing driving positions
System which takes into account the
electrical settings of the driver's seat
and exterior mirrors. It enables you
to store up to two positions using the
buttons on the side of the driver's
seat.
Using buttons M/1/2
Switch on the ignition.
Adjust your seat and the exterior
mirrors.
Press button M, then press but-
ton 1 or 2 within four seconds.
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery.
III
An audible signal is heard indi-
cating that the position has been
stored.
Storing a new position cancels the
previous position.
Vehicle moving
Press and hold button 1 or 2
until the audible signal is
heard indicating the end of the
adjustment.
Do not try to store a driving position
while driving.
Copyright CITROEN compiled by C4owners.org
59