Advertisement

Advertisement

Fittings for Your Citroen C4 Grand Picasso SUV First Generation (2006-2013)

A C C E S S  
Quality of the fuel used for petrol  
engines  
Quality of the fuel used for Diesel  
engines  
The petrol engines are perfectly  
compatible with E10 type petrol  
biofuels (containing 10 % ethanol),  
conforming to European standards  
EN 228 and EN 15376.  
E85 type fuels (containing up to 85 %  
ethanol) are reserved exclusively for  
vehicles marketed for the use of this  
type of fuel (BioFlex vehicles). The  
quality of the ethanol must comply  
with European standard EN 15376.  
The Diesel engines are perfectly  
compatible with biofuels which con-  
form to current and future European  
standards (diesel fuel which com-  
plies with standard EN 590 mixed  
with a biofuel which complies with  
standard EN 14214) available at the  
pumps (containing up to 7 % Fatty  
Acid Methyl Ester).  
The B30 biofuel can be used in cer-  
tain Diesel engines; however, this  
use is subject to strict application  
of the special servicing conditions.  
Consult a CITROËN dealer.  
IV  
For Brazil only, special vehicles are  
marketed to run on fuels containing  
up to 100 % ethanol (type E100).  
The use of any other type of (bio)fuel  
(vegetable or animal oils, pure or di-  
luted, domestic fuel...) is strictly pro-  
hibited (risk of damage to the engine  
and fuel circuit).  
Copyright CITROEN compiled by C4owners.org  
83  
V I S I B I L I T Y  
A. Main lighting mode selection ring,  
with:  
LIGHTING CONTROLS  
Programming  
System for selection and control of  
the various front and rear lamps pro-  
viding the vehicle's lighting.  
Various automatic lighting control  
modes are also available depending  
on options:  
lamps off,  
-
-
-
guide-me-home lighting,  
automatic lighting,  
directional lighting.  
Main lighting  
automatic lighting,  
sidelamps only,  
The various front and rear lamps of  
the vehicle are designed to adapt  
the driver's visibility progressively in  
relation to the climatic conditions:  
Manual controls  
-
-
sidelamps, to be seen,  
dipped headlamps to see with-  
out dazzling other drivers,  
main beam headlamps to see  
clearly when the road is clear,  
dipped headlamps or  
main beam headlamps.  
-
-
directional headlamps for im-  
proved visibility when cornering.  
B. Stalk for switching headlamps by  
pulling: dipped headlamps/main  
beam headlamps.  
In the lamps off and sidelamps  
modes, the driver can switch on the  
main beam headlamps temporarily  
("headlamp flash") by maintaining a  
pull on the stalk.  
Additional lighting  
Other lamps are fitted to fulfil the  
requirements of particular driving  
conditions:  
The lighting commands are issued  
directly by the driver by means of  
the ring A and the stalk B.  
Displays  
-
-
-
a rear foglamp to be seen from a  
distance,  
front foglamps for even better  
forward vision,  
daytime running lamps to be  
seen during the day.  
Lighting of the corresponding indi-  
cator lamp on the instrument panel  
confirms the selective switching on  
of the lighting selected.  
Copyright CITROEN compiled by C4owners.org  
84  
V I S I B I L I T Y  
C. Foglamps selection ring.  
In good or rainy weather, both day  
and night, the front foglamps and  
the rear foglamp are prohibited. In  
these situations, the power of their  
beams may dazzle other drivers.  
They should only be used in fog or  
snow.  
In these weather conditions, it is  
your responsibility to switch on the  
foglamps and dipped headlamps  
manually as the brightness sensor  
may detect sufficient light.  
The foglamps operate with the side-  
lamps and the dipped and main  
beam headlamps.  
Model with rear foglamp only  
Model with front and rear  
foglamps  
Do not forget to switch off the front  
foglamps and the rear foglamp  
when they are no longer necessary.  
V
Lighting on buzzer  
On switching off the ignition, all  
of the lamps turn off immediately,  
except for diiped beam if guide-  
me-home lighting is activated.  
To reactivate the lighting control, ro-  
tate ring A to the "0" position, lamps  
off, then to the desired position.  
-
-
1st turn forwards: rear foglamp on.  
1st turn rearwards: rear foglamp off.  
-
-
-
-
1st turn forwards: front foglamps on.  
2nd turn forwards: rear foglamps on.  
1st turn rearwards: rear foglamps off.  
2nd turn rearwards: front foglamps  
off.  
On opening the driver's door a  
temporry audible signal warns the  
driver that the lamps are on.  
The lamps, with the exception of  
the sidelamps, switch off automati-  
cally after thirty minutes to prevent  
discharging of the battery.  
Copyright CITRO
E
N compiled by C4owners.org  
85  
V I S I B I L I T Y  
Daytime-running lamps*  
Manual guide-me-home  
lighting  
Automatic lighting  
System which switches on the ve-  
hicle's dipped headlamps automati-  
cally on starting.  
This safety system makes the vehi-  
cle more visible to other road users  
during the day.  
The sidelamps and dipped head-  
lamps are switched on automatically,  
without any action on the part of the  
driver, when a low level of external  
light is detected or in certain cases of  
activation of the windscreen wipers.  
The temporary lighting of dipped  
headlamps after the vehicle's igni-  
tion has been switched off makes  
the driver's exit easier when the light  
is poor.  
As soon as the brightness returns  
to a sufficient level or after the wind-  
screen wipers are switched off, the  
lamps are switched off automatically.  
The lighting of the instruments and  
controls (instrument panel, multi-  
function screen, air conditioning  
control panel, ...) is independent of  
this function. It is provided by the  
automatic lighting mode or when the  
lamps are switched on manually.  
V
In countries in which it is imposed by  
regulations:  
-
by default, this function is acti-  
vated,  
Switching on  
With the ignition off, "flash" the  
headlamps using the lighting  
stalk B.  
A second "headlamp flash"  
switches the function off again.  
-
the sidelamps and the number  
plate lamps are also switched on.  
Activation  
Turn ring A to the "AUTO" posi-  
tion. The automatic lighting is ac-  
companied by a message on the  
multifunction screen.  
Switching off  
The manual guide-me-home lighting  
switches off automatically after a set  
time.  
Deactivation  
Turn ring A to a position other  
than "AUTO". Deactivation is  
The manual guide-me-home light-  
ing is also available by pressing
C
th
I
eTROEN compiled by C4owners.org  
accompanied by a message on  
the multifunction screen.  
lighting button on the remote con-  
trol (refer to the section "Access -  
§ Remote control key").  
* According to country.  
86  
V I S I B I L I T Y  
Linking with the automatic  
"Guide-me-home" lighting  
EXTERIOR SIDE SPOTLAMPS  
THE HEADLAMPS  
Association with the automatic light-  
ing provides the "guide-me-home"  
lighting with the following additional  
options:  
-
selection of the lighting duration  
to 15, 30 or 60 seconds in the  
vehicle parameters on the mul-  
tifunction screen configuration  
menu (in the case of the mono-  
chrome screen A, the duration is  
fixed),  
V
-
automatic activation of "guide-  
me-home" lighting when auto-  
matic lighting is in operation.  
These illuminate:  
-
To avoid dazzling other road users,  
the height of the halogen bulb head-  
lamps must be adjusted according  
to the load in the vehicle. To do this,  
turn the control, located below the  
fascia to the left of the driver, to the  
appropriate position:  
the zones facing the driver’s and  
passenger’s doors,  
Operating fault  
-
the zones forward of the door  
mirrors and rearward of the front  
doors.  
In the event of a malfunction of the  
brightness sensor, the lamps comes  
on, a message appears on the multi-  
function screen, accompanied by an  
audible signal.  
Switching on  
0. 1 or 2 people in the front seats.  
-. 3 people.  
1. 4 to 7 people.  
-. Intermediate setting.  
2. 4 to 7 people + maximum autho-  
rised loads.  
-. Intermediate setting.  
3. Driver + maximum authorised  
loads.  
The side spotlamps come on:  
Consult a CITROËN dealer.  
-
when you unlock the vehicle or  
press on the lighting button on  
the remote control,  
In fog or snow, the brightness  
sensor may detect sufficient light.  
Therefore, the lighting will not  
come on automatically.  
Do not cover the brightness sen-  
sor, linked with the rain sensor and  
located in the centre of the wind-  
screen behind the interior mirror;  
the associated functions would no  
longer be controlled.  
-
when you remove the key from  
the ignition,  
when you open a door,  
-
-
when you use the remote control.  
Switching off  
Copyright CITRO
EN compiled by C4owners.org  
They are timed
to go out automati-  
cally.  
Initial setting is position
"0"
.  
87  
V I S I B I L I T Y  
AUTOMATIC ADJUSTMENT  
OF THE DIRECTIONAL  
HEADLAMPS  
DIRECTIONAL LIGHTING  
Programming  
The function is activat-  
When the dipped or main beam  
headlamps are on, this function ena-  
bles the light beam to follow the di-  
rection of the road.  
ed or deactivated via  
themultifunctionscreen  
configuration menu.  
The use of this function, coupled  
with the xenon headlamps only,  
considerably improves the quality of  
your lighting when cornering.  
Operating fault  
If a malfunction occurs, this  
warning lamp flashes on the  
instrument panel, accompa-  
nied by a message on the  
multifunction screen.  
V
Consult a CITROËN dealer.  
In order to avoid causing a nuisance  
to other road users, this system cor-  
rects the height of the xenon head-  
lamps beam automatically and when  
stationary, in relation to the load in  
the vehicle.  
When stationary or moving at very  
low speed or when reverse gear is  
engaged, the system is inactive.  
with directional lighting  
If a malfunction occurs, this  
warning lamp is displayed  
on the instrument panel,  
accompanied by an audible  
signal and a message on  
the multifunction screen.  
The status of the system remains  
in the memory when the ignition is  
switched off.  
On vehicles fitted with daytime run-  
ning lights, the function is activated if  
the lighting stalk is in the "AUTO" o r  
"Dipped/main beam headlamps"  
position. In position "0", the function  
is not activated.  
The system then places your headlamps in  
the lowest position.  
TROEN compiled by C4owners.org  
Do not touch the xenon bulbs.  
Consult a CITROËN dealer.  
without directional lighting  
88  
V I S I B I L I T Y  
Daytime-running lamps*  
Manual guide-me-home  
lighting  
Automatic lighting  
System which switches on the ve-  
hicle's dipped headlamps automati-  
cally on starting.  
This safety system makes the vehi-  
cle more visible to other road users  
during the day.  
The sidelamps and dipped head-  
lamps are switched on automatically,  
without any action on the part of the  
driver, when a low level of external  
light is detected or in certain cases of  
activation of the windscreen wipers.  
The temporary lighting of dipped  
headlamps after the vehicle's igni-  
tion has been switched off makes  
the driver's exit easier when the light  
is poor.  
As soon as the brightness returns  
to a sufficient level or after the wind-  
screen wipers are switched off, the  
lamps are switched off automatically.  
The lighting of the instruments and  
controls (instrument panel, multi-  
function screen, air conditioning  
control panel, ...) is independent of  
this function. It is provided by the  
automatic lighting mode or when the  
lamps are switched on manually.  
V
In countries in which it is imposed by  
regulations:  
-
by default, this function is acti-  
vated,  
Switching on  
With the ignition off, "flash" the  
headlamps using the lighting  
stalk B.  
A second "headlamp flash"  
switches the function off again.  
-
the sidelamps and the number  
plate lamps are also switched on.  
Activation  
Turn ring A to the "AUTO" posi-  
tion. The automatic lighting is ac-  
companied by a message on the  
multifunction screen.  
Switching off  
The manual guide-me-home lighting  
switches off automatically after a set  
time.  
Deactivation  
Turn ring A to a position other  
than "AUTO". Deactivation is  
The manual guide-me-home light-  
ing is also available by pressing
C
th
I
eTROEN compiled by C4owners.org  
accompanied by a message on  
the multifunction screen.  
lighting button on the remote con-  
trol (refer to the section "Access -  
§ Remote control key").  
* According to country.  
86  
V I S I B I L I T Y  
Linking with the automatic  
"Guide-me-home" lighting  
EXTERIOR SIDE SPOTLAMPS  
THE HEADLAMPS  
Association with the automatic light-  
ing provides the "guide-me-home"  
lighting with the following additional  
options:  
-
selection of the lighting duration  
to 15, 30 or 60 seconds in the  
vehicle parameters on the mul-  
tifunction screen configuration  
menu (in the case of the mono-  
chrome screen A, the duration is  
fixed),  
V
-
automatic activation of "guide-  
me-home" lighting when auto-  
matic lighting is in operation.  
These illuminate:  
-
To avoid dazzling other road users,  
the height of the halogen bulb head-  
lamps must be adjusted according  
to the load in the vehicle. To do this,  
turn the control, located below the  
fascia to the left of the driver, to the  
appropriate position:  
the zones facing the driver’s and  
passenger’s doors,  
Operating fault  
-
the zones forward of the door  
mirrors and rearward of the front  
doors.  
In the event of a malfunction of the  
brightness sensor, the lamps comes  
on, a message appears on the multi-  
function screen, accompanied by an  
audible signal.  
Switching on  
0. 1 or 2 people in the front seats.  
-. 3 people.  
1. 4 to 7 people.  
-. Intermediate setting.  
2. 4 to 7 people + maximum autho-  
rised loads.  
-. Intermediate setting.  
3. Driver + maximum authorised  
loads.  
The side spotlamps come on:  
Consult a CITROËN dealer.  
-
when you unlock the vehicle or  
press on the lighting button on  
the remote control,  
In fog or snow, the brightness  
sensor may detect sufficient light.  
Therefore, the lighting will not  
come on automatically.  
Do not cover the brightness sen-  
sor, linked with the rain sensor and  
located in the centre of the wind-  
screen behind the interior mirror;  
the associated functions would no  
longer be controlled.  
-
when you remove the key from  
the ignition,  
when you open a door,  
-
-
when you use the remote control.  
Switching off  
Copyright CITRO
EN compiled by C4owners.org  
They are timed
to go out automati-  
cally.  
Initial setting is position
"0"
.  
87  
V I S I B I L I T Y  
AUTOMATIC ADJUSTMENT  
OF THE DIRECTIONAL  
HEADLAMPS  
DIRECTIONAL LIGHTING  
Programming  
The function is activat-  
When the dipped or main beam  
headlamps are on, this function ena-  
bles the light beam to follow the di-  
rection of the road.  
ed or deactivated via  
themultifunctionscreen  
configuration menu.  
The use of this function, coupled  
with the xenon headlamps only,  
considerably improves the quality of  
your lighting when cornering.  
Operating fault  
If a malfunction occurs, this  
warning lamp flashes on the  
instrument panel, accompa-  
nied by a message on the  
multifunction screen.  
V
Consult a CITROËN dealer.  
In order to avoid causing a nuisance  
to other road users, this system cor-  
rects the height of the xenon head-  
lamps beam automatically and when  
stationary, in relation to the load in  
the vehicle.  
When stationary or moving at very  
low speed or when reverse gear is  
engaged, the system is inactive.  
with directional lighting  
If a malfunction occurs, this  
warning lamp is displayed  
on the instrument panel,  
accompanied by an audible  
signal and a message on  
the multifunction screen.  
The status of the system remains  
in the memory when the ignition is  
switched off.  
On vehicles fitted with daytime run-  
ning lights, the function is activated if  
the lighting stalk is in the "AUTO" o r  
"Dipped/main beam headlamps"  
position. In position "0", the function  
is not activated.  
The system then places your headlamps in  
the lowest position.  
TROEN compiled by C4owners.org  
Do not touch the xenon bulbs.  
Consult a CITROËN dealer.  
without directional lighting  
88  
V I S I B I L I T Y  
R e a r w ip e r  
WIPER CONTROLS  
Manual controls  
System for selection and control of  
the various front and rear wiping  
modes for the elimination of rain and  
cleaning.  
The wiper commands are issued di-  
rectly by the driver by means of the  
stalk A and the ring B.  
The vehicle's front and rear wipers  
are designed to improve the driver's  
visibility progressively according to  
the climatic conditions.  
Windscreen wipers  
A. wiping speed selection stalk:  
V
B. rear wiper selection ring:  
fast (heavy rain),  
normal (moderate rain),  
park,  
intermittent (proportional to  
the speed of the vehicle),  
intermittent wipe,  
park,  
single wipe (press down-  
wards),  
wash-wipe (set duration).  
Programming  
o r  
Various automatic wiper control  
modes are also available according  
to the following options:  
automatic,  
single wipe (see  
next page).  
then  
If a significant accumulation of snow  
or ice is present, or when using a  
tailgate bicycle carrier, deactivate  
the automatic rear wiper via the  
multifunction screen configuration  
-
automatic wiping for the wind-  
screen wipers,  
Copyright CITRO
E
N compiled by C4owners.org  
-
rear wiping on engaging reverse  
gear.  
menu
89  
V I S I B I L I T Y  
Reverse gear  
Automatic windscreen wiping  
The automatic wiping must be re-  
activated if the ignition has been off  
for more than one minute, by push-  
ing stalk A downwards.  
When reverse gear is engaged, the  
rear wiper will come into operation if  
the windscreen wipers are operating.  
The windscreen wipers operate au-  
tomatically, without any action on the  
part of the driver, if rain is detected  
(sensor behind the interior mirror),  
adapting their speed to the intensity  
of the rainfall.  
Programming  
The function is activat-  
ed or deactivated via  
themultifunctionscreen  
configuration menu.  
This function is activat-  
ed by default.  
Activation  
Operating fault  
If an automatic wiping malfunction  
occurs, the wipers will operate in in-  
termittent mode.  
Have it checked by a CITROËN  
dealer.  
V
Windscreen and headlamp  
wash  
This is controlled manually by the  
driver by pushing stalk A to the  
"AUTO" position.  
It is accompanied by a message on  
the multifunction screen.  
Do not cover the rain sensor, linked  
with the brightness sensor and  
located in the centre of the wind-  
screen behind the interior mirror.  
Switch off the automatic wip-  
ing when using an automatic car  
wash.  
In winter, it is advisable to wait until  
the windscreen is completely clear  
of ice before activating the auto-  
matic wiping.  
Pull the windscreen wiper stalk  
towards you. The windscreen  
wash then the windscreen  
wipers operate for a fixed period.  
If the dipped headlamps are on  
the headlamp washers operate at  
the same time.  
Switching off  
This is controlled manually by the  
driver by moving stalk A upwards  
and returning it to position "0".  
Copyright CITROEN compiled by C4owners.org  
It is accompanie
d by a messag
e on  
the multifunction screen.  
90  
V I S I B I L I T Y  
It switches off gradually:  
Special position of  
the windscreen wipers  
COURTESY LAMPS  
-
-
-
when the vehicle is locked,  
when the ignition is switched on,  
30 seconds after the last door is  
closed.  
Selection and control of the various  
passenger compartment lamps.  
Permanently off.  
Permanent lighting.  
In permanent lighting mode, differ-  
ent lighting times are available:  
V
-
-
-
with the ignition off, approxi-  
mately ten minutes,  
in energy economy mode, ap-  
proximately thirty seconds,  
with the engine running, unlimited.  
In the minute following switching off  
of the ignition, any action on the stalk  
positions the wipers in the centre of  
the windscreen.  
This action enables you to position  
the wiper blades for winter parking,  
cleaning or replacement.  
To park the wipers after this has  
been done, switch on the ignition  
and operate the stalk.  
1. Front courtesy lamp  
2. Map reading lamps  
Map reading lamps  
With the ignition on, press the  
corresponding switch.  
Front courtesy lamp  
Glass panoramic roof  
courtesy lamps  
These courtesy lamps have two op-  
erating modes:  
In this position, the courtesy  
lamp comes on gradually:  
For optimum and lasting wiping of  
the "flat-blade" wiper blades, it is  
advisable to:  
-
-
when the vehicle is unlocked,  
when a door or the boot is  
opened,  
when the key is removed from  
the ignition,  
when the remote control locking  
button is activated, in order to lo-  
cate your vehicle.  
-
-
handle them with care,  
clean them regularly using  
soapy water,  
-
automatic lighting when a door is  
opened or when the front cour-  
tesy lamp is in the "permanent  
lighting" position,  
-
-
-
-
change them approximately  
every 6 months,  
avoid using them to retain card-  
board on the windscreen.  
-
permanent lighting.  
CITROEN compiled by C4owners.org  
Opening the boot switches on the  
third row courtesy lamp and the boot  
lamps.  
91