F I T T I N G S
Engage the lug on the left of the
roller in notch C.
Pass the right-hand side above
Position 3
The roller has a moving flap to
avoid interference with the second-
row passengers when the seats
are in the "reclined" position.
7-seat configuration; stowed behind
the third row seats when these are
folded away.
the third-row armrest.
Engage the lug in notch D.
Pull the seat belt(s) so that they
will deploy without locking.
Unroll the blind and engage the
guides into the rails on the pillars.
Lock the seat(s) in position.
Position 2
7-seat configuration; installed be-
hind the third-row seats when these
are folded away. This position con-
ceals objects stowed in the boot
from outside view.
VI
Removing the roller
Push the flap towards the seat
backrest.
Lift the concertina board by grab-
bing it at the side, then position it
vertically.
Unlock the seat by pulling the
strap E.
Push the backrest towards the front.
Proceed in reverse order to in-
stalling.
Installing the roller
Fold the concertina boards.
Position the roller, with the blind
pull bar uppermost, flap down-
ward.
Engage the lug on the left of the
roller in notch C.
Pass the right-hand side above
the third-row armrest.
Engage the lug in notch D.
Installing the roller
Roll up the blind, then remove
the roller from its initial position.
Position the roller, with the blind
pull bar uppermost, flap down-
ward.
The blind can only be stored when
the seats are folded away.
You can position the concertina
board vertically to lodge a bulkier
object in the boot well.
Removing the roller
Proceed in reverse order to in-
Fold the concertina boards.
Copyright CITROEN compiled by C4owners.org
101