Checks
Bonnet
Before doing anything under the bonnet,
switch off the Stop & Start system to
avoid any risk of injury resulting from an
automatic change to START mode.
Lift the safety catch and raise the bonnet.
Unclip the stay from its housing and place it
in the support slot to hold the bonnet open.
Closing
Do not open the bonnet under very
windy conditions.
When the engine is hot, handle the
exterior safety catch and the stay with
care (risk of burns), using the protected
area.
Take the stay out of its support slot.
Clip the stay back into its housing.
Lower the bonnet and release it at the end
of its travel.
Opening
Open the left hand front door.
Pull the release lever, located at the bottom
of the door aperture, towards you.
Pull on the bonnet to check that it has
latched correctly.
When the bonnet is open, take care not
to damage the safety catch.
The cooling fan may start after
switching off the engine: take care
with articles and clothing that might
become caught by the fan blades.
310
English 