Advertisement

Advertisement

Practical information -> Roof bars for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Practical information  
Roof bars  
For safety reasons and to avoid damaging the  
roof, it is essential to use transverse roof bars  
that are approved for your vehicle.  
Version without longitudinal Version with longitudinal  
bars  
bars  
Observe the fitting instructions and the  
conditions of use given in the information  
provided with the roof bars.  
To install the roof bars, you must secure  
them only to the four anchorage points in the  
roof frame. These points are masked by the  
vehicle's doors when closed.  
You must fit the transverse bars to the  
longitudinal bars at the fixing points indicated  
by engraved markings on the longitudinal bars.  
The roof bar fixings include a stud that should  
be introduced into the aperture at each  
anchorage point.  
304  
 
Practical information  
Recommendations  
Maximum load, distributed over the roof  
bars, for a loading height not exceeding  
40 cm: 80 kg.  
This value is subject to change, please  
check the maximum load stated in the  
instructions provided with he roof bars.  
If the height exceeds 40 cm, adapt the  
speed of the vehicle to the profile of the  
road to avoid damaging the roof bars  
and the fixings on the vehicle.  
Distribute the load evenly, avoiding  
overloading on one side.  
Arrange the heaviest part of the load as  
close as possible to the roof.  
Anchor the load securely and fit a warning  
flag if part of it overhangs the vehicle.  
Drive gently, as the vehicle will be more  
liable to the effects of side winds (vehicle  
stability may be affected).  
Please refer to national legislation so as  
to meet the requirements on carrying  
objects that are longer than the vehicle.  
Remove the roof bars as soon as they are  
no longer needed.  
7
When carrying long objects, it is  
recommended that you deactivate the  
motorised operation of the tailgate.  
305