C H E C K S
The location of the interior release
lever prevents opening of the bon-
net while the left hand door is
closed.
Opening
This operation must only be carried
out when the vehicle is stationary.
Avoid opening the bonnet in strong
winds.
When the engine is hot, take care
when handling the exterior safety
catch and the bonnet stay (risk of
burns).
Before doing anything un-
der the bonnet, switch off
the Stop & Start system
to avoid any risk of injury result-
ing from an automatic change to
START mode.
) At the front of the bonnet, push
the exterior safety catch B to the
left and raise the bonnet.
Closing
) Take the stay out of the support
notch.
) Clip the stay in its housing.
) Lower the bonnet then slam it
closed at the end of its travel.
) Pull on the bonnet to check that
it is fully closed.
) Open the left hand front door.
) Pull the interior release lever A,
located at the bottom of the door
frame.
X
) Unclip the stay C from its housing.
) Fix the stay in the notch to hold
the bonnet open.
174
English 