B L U E T O O T H ®
Your audio system may be
Bluetooth® compatible. It allows
you to connect a mobile telephone
for use “hands free” and even to
use its directory.
It permits you to twin up to four tel-
ephones, to be able then to connect
whichever one you choose.
The Bluetooth® functions available
and the content of the display are
dependent on the type of mobile
telephone, its settings and the type
of contract you have. For this reason
it is advisable to make enquiries with
your telephone provider.
Note :
Connecting a twinned
telephone
Refer to the user instructions to
familiarise yourself with the features
of twinning.
- The telephone detects the
Bluetooth®systemonyourvehicle.
“C4” displays on your telephone.
You should then select “C4” on
your telephone controls. Next you
must choose whether or not to
accept this twinning then select,
on screen C using J, M or 8, one
of the 4 memories. Validate with a
press on button L or 7.
Each time you enter the vehicle,
after switching on the audio system,
your telephone is detected automati-
cally. If more than one telephone is
present, the last telephone to have
been connected is the first to be
recognised.
Note :
Disconnections may occur. You may
have to make a new connection (see
following page, Configuration :
Connecting
telephone).
Remarks :
a
twinned mobile
IV
Prior to any operation :
- Your display should be lit up (key
in position M).
- Your telephone’s Bluetooth®
system must be activated.
Note :
- In the event of a problem, it is
recommended to switch your
telephone off and then on again.
- If you switch off your telephone
within the field of reception of
the Bluetooth® system on your
vehicle, the next connection will
not be automatic. To restore
automatic connection, you will
have to connect your telephone
manually(see following page,
Configuration : Connecting a
twinned mobile telephone).
- If you are already in telephone
communication when the audio
system is turned on, the latter
detects the telephone.
You can select a memory already
attributed, although the telephone
twinned to this location will no longer
be.
- Next the telephone asks you
to enter an identification code :
1234.
Twinning a telephone
Twinning
a
telephone consists
of having it recognised by the
Bluetooth® system on your vehicle.
This then permits an instantaneous
connection.
- Validate.
Note :
This entry may be demanded earlier
in the twinning sequence.
The telephone is now twinned
to your Bluetooth® system. For
immediate access to the Bluetooth®
functions, it may be necessary to
make a connection (see following
page Configuration : Connecting a
twinned mobile telephone).
Twinning can only be performed with
ignition switched on, display illumi-
nated, engine stopped. No other
telephone should be connected.
- The twinning must be performed
with the telephone and its
Bluetooth® system activated.
- To avoid interference, you are
advised not to place your mobile
telephone close to your radio.
Once the twinning is finished, you will
be able to connect your telephone
via the “Main menu”.
To accept an incoming call
Using button L or control 7 at the
steering wheel.
115
English 