Advertisement

Advertisement

Driving -> Automatic gearbox for Your Citroen C4 SUV Second Generation (2010-2018)

Driving  
Automatic gearbox  
Six speed automatic gearbox which offers a choice  
between the comfort of fully automatic operation,  
enhanced by sport and snow programmes, and  
the pleasure of manual gear changing.  
Gear selector positions  
Displays in the instrument  
panel  
Two driving modes are offered:  
-
automatic operation for electronic  
management of the gears by the gearbox,  
with a sport programme for a more  
dynamic style of driving and a snow  
programme to improve driving when  
traction is poor,  
P. Park.  
-
manual operation for sequential changing  
of the gears by the driver.  
-
Immobilisation of the vehicle, parking brake  
on or off.  
-
Starting the engine.  
When you move the selector in the gate to  
select a position, the corresponding indicator  
comes on in the instrument panel.  
Gear selection gate  
R. Reverse.  
Reversing manoeuvres, vehicle stationary,  
engine at idle.  
N. Neutral.  
-
P
R
N
D
S
T
Park  
Reverse  
Neutral  
Drive (automatic driving)  
Sport programme  
Snow programme  
-
Immobilisation of the vehicle, parking brake  
on.  
Starting the engine.  
-
D. Automatic operation.  
M.+ / - Manual operation with sequential  
changing of the six gears.  
F
F
1 to 6 Gear engaged during manual operation  
Invalid value during manual operation  
Push forwards to change up through the  
gears.  
or  
Pull backwards to change down through  
the gears.  
-
1. Gear selector.  
2. Button "T" (snow).  
3. Button "S" (sport).  
4. Position markings for the gear selector.  
182  
Driving  
Moving off  
Automatic operation  
F
With your foot on the brake, select  
position P or N.  
Start the engine.  
F
Select position D for automatic changing  
of the six gears.  
If the parking brake does not release  
automatically, check that the front doors  
are fully closed.  
F
The gearbox then operates in auto-adaptive  
mode, without any intervention on the part  
of the driver. It continuously selects the most  
suitable gear according to the style of driving,  
the profile of the road and the load in the  
vehicle.  
For maximum acceleration without touching  
the selector, press the accelerator pedal down  
fully (kick down). The gearbox changes down  
automatically or maintains the gear selected  
until the maximum engine speed is reached.  
On braking, the gearbox changes down  
automatically to provide effective engine  
braking.  
If this procedure is not followed, an audible  
signal is heard, accompanied by a message in  
the instrument panel screen.  
F
With the engine running, press the brake  
pedal.  
Select position R, D or M.  
If position N is engaged inadvertently  
while driving, allow the engine to  
return to idle then engage position D to  
accelerate.  
F
If you do not press the brake pedal when  
trying to move the gear selector out  
of position P, this warning lamp or this  
When the engine is running at idle, with  
the brakes released, if position R, D  
or M is selected, the vehicle moves  
even without the accelerator being  
pressed.  
Never leave children unsupervised in  
the vehicle when the engine is running.  
When carrying out maintenance with  
the engine running, apply the parking  
brake and select position P.  
symbol appears in the instrument panel accompanied  
by a message, flashing of the P symbol, the display of  
a message and an audible signal.  
6
If you release the accelerator sharply, the  
gearbox will not change to a higher gear for  
safety reasons.  
F
F
Check that the display in the instrument  
panel agrees with the position engaged.  
Gradually release the brake pedal.  
The parking brake is released manually, the  
vehicle moves off.  
If the parking brake is on and automatic mode  
is activated, accelerate progressively.  
Never select position N while the  
vehicle is moving.  
Never select positions P or R unless the  
vehicle is completely stationary.  
183  
Driving  
Sport and snow  
programmes  
Return to auto-adaptive  
mode  
These two special programmes supplement the  
automatic operation in very specific conditions  
of use.  
F
At any time, press the button selected  
again to leave the special programme  
engaged and return to auto-adaptive mode.  
Sport programme "S"  
Snow programme "T"  
F
Press button "S", after starting the engine.  
F
Press button "T", after starting the engine.  
The gearbox automatically favours a dynamic  
style of driving.  
The gearbox adapts to driving on slippery  
roads.  
This programme improves starting and drive  
when traction is poor.  
S appears in the instrument panel.  
T appears in the instrument panel.  
184  
Driving  
Manual operation  
Stopping the vehicle  
Before switching off the engine, put the selector  
in position P or N to place the gearbox in  
neutral.  
In both cases, apply the parking brake to  
immobilise the vehicle, unless it is programmed  
to automatic mode.  
F
F
F
Select position M for sequential changing  
of the six gears.  
Push the selector towards the + sign to  
change up a gear.  
Pull the selector towards the - sign to  
change down a gear.  
Invalid value during manual  
operation  
This symbol is displayed if a gear  
is not engaged correctly (selector  
between two positions).  
It is only possible to change from one gear to  
another if the vehicle speed and engine speed  
permit; otherwise, the gearbox will operate  
temporarily in automatic mode.  
If the selector is not in position P,  
when the driver's door is opened or  
approximately 45 seconds after the  
ignition is switched off, there is an  
audible signal and a message appears.  
D disappears and the gears  
engaged appear in succession on  
the instrument panel.  
F
Return the selector to position P;  
the audible signal stops and the  
message disappears.  
6
If the engine speed is too low or too high, the  
gear selected flashes for a few seconds, then  
the actual gear engaged is displayed.  
When the vehicle is stationary or moving  
very slowly, the gearbox selects gear 1  
automatically.  
It is not necessary to release the accelerator  
when changing gear.  
It is possible to change from position D  
(automatic) to position M (manual) at any time.  
The sport and snow programmes do not  
operate in manual mode.  
185  
Driving  
Operating fault  
When the ignition is on, a message  
appears in the instrument panel  
screen to indicate a gearbox fault.  
You risk damaging the gearbox:  
-
if you press the accelerator and  
brake pedals at the same time,  
if you force the selector from  
position P to another position when  
the battery is flat.  
-
In this case, the gearbox switches to back-up  
mode and is locked in 3rd gear. You may feel  
a substantial knock when changing from P  
to R and from N to R. This will not cause any  
damage to the gearbox.  
Do not exceed 60 mph (100 km/h), local speed  
restrictions permitting.  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
To reduce fuel consumption when  
stationary for long periods with the  
engine running (traffic jam...), position  
the gear selector at N and apply the  
parking brake, unless it is programmed  
in automatic mode.  
186