Get Ease of use and comfort -> Front seats Guide for Citroen C4 SUV Second Generation (2010-2018)

Ease of use and comfort

Front seats

Manual adjustments

Before moving the seat backwards, ensure that there is nothing that might prevent the full

travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of

objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement

immediately.

As a safety measure, seat adjustments

should only be done when stationary.

3

Forwards-backwards

Seat height

Seat backrest angle

F

Raise the control and slide the seat

forwards or backwards.

Release the control to lock the position.

F

Pull the control upwards to raise or push

it downwards to lower, as many times as

necessary, to obtain the position required.

F

Turn the control knob to adjust the seat

backrest angle.

F

81

Ease of use and comfort

Driver's seat electric adjustments

The electrical functions of the driver's seat

are deactivated approximately one minute

after the ignition is switched off.

Before moving the seat backwards, ensure that there is nothing that might prevent the full

travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of

objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement

immediately.

To reactivate them, switch on the ignition.

Forwards-backwards

Cushion height and angle

Seat backrest angle

F

Push the control forwards or rearwards to

slide the seat.

F

Tilt the rear part of the control upwards or

downwards to obtain the required height.

Tilt the front part of the control upwards or

downwards to obtain the required angle.

F

Tilt the control forwards or rearwards to

adjust the angle of the seat backrest.

F

82

Ease of use and comfort

Additional adjustments

3

Removing a head restraint

Heated seats control

Head restraint height and angle

F

To remove the head restraint, press the

lug A and pull the head restraint upwards.

To put the head restraint back in place,

engage the head restraint stems in the

openings keeping them in line with the seat

back and press the lug A at the same time.

With the engine running, the front seats can be

heated separately.

F

To raise a head restraint, pull it upwards.

To lower the head restraint, press the lug A

and the head restraint at the same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

F

Use the adjustment dial, placed on the side

of each front seat, to switch on and select

the level of heating required:

0: Off.

F

1: Low.

2: Medium.

3: High.

The head restraint is fitted with a frame

with notches which prevents it from

lowering; this is a safety device in case

of impact.

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

The adjustment is correct when the

upper edge of the head restraint is

level with the top of the head.

83

Ease of use and comfort

Massage function

This function provides a back massage; it only

operates when the engine is running.

Manual lumbar adjustment

Electric lumbar adjustment

F

Turn the knob to obtain the desired level of

lumbar support.

F

Press the front or rear of the control to

F

Press the switch to activate the function.

obtain the desired lumbar support.

The warning lamp on the switch comes on and

the massage function is activated for a period

of 60 minutes. During this time, massage is

performed in 6 cycles of 10 minutes each cycle

(6 minutes of massage followed by 4 minutes

break).

After an hour, the function is automatically

deactivated. The warning lamp in the switch

goes off.

Deactivation

You can deactivate the massage function at

any time by pressing the switch. The movement

in progress continues until the initial non-

massage position is reached.

84

Ease of use and comfort

Storing driving positions

System which registers the electrical settings

of the driver's seat and door mirrors. It enables

you to store and recall two positions using the

buttons on the side of the driver's seat.

Storing a position

Recalling a stored position

Ignition on or engine running

Using buttons M / 1 / 2

3

F

Switch on the ignition.

F

Press button 1 or 2 to recall the

corresponding position.

Adjust your seat and the door mirrors.

Press button M, then press button 1 or 2

within four seconds.

An audible signal confirms that adjustment

is complete.

An audible signal indicates that the position

has been stored.

You can interrupt the current movement

by pressing button M, 1 or 2 or by using

one of the seat controls.

A stored position cannot be recalled

while driving.

Recalling stored positions is

deactivated 45 seconds after switching

off the ignition.

Storing a new position cancels the

previous position.

85

Ease of use and comfort

Steering wheel adjustment

F

When stationary, pull the control lever to

release the adjustment mechanism.

Adjust the height and reach to suit your

driving position.

Push the control lever to lock the

adjustment mechanism.

As a safety measure, these operations

should only be carried out with the

vehicle stationary.

86

Ease of use and comfort -> Front seats for Your Citroen C4 SUV Second Generation (2010-2018)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals