Lighting and visibility
In "AUTO" and sidelamps mode, pull the lighting
control stalk to switch the main beam headlamps
on directly ("headlamp flash").
Lighting control stalk
4
Main lighting
Display
Illumination of the corresponding indicator
lamp on the instrument panel confirms that the
selected lighting is on.
A fault with a lamp is signalled by the
permanent illumination of this warning
lamp, accompanied by the display of a message
and an audible signal.
► Rotate the ring forwards:
• once to switch on the front foglamps,
• a second time to switch on the rear foglamp.
► Turn in the opposite direction to switch off.
If the lighting is switched off automatically
("AUTO" position) or the dipped beam
headlamps are switched off manually, the
foglamps and sidelamps remain on.
Automatic illumination of lamps/daytime
running lamps
Sidelamps only
Rear foglamp
► Rotate the ring backwards to switch the
foglamps off; the sidelamps will then switch off.
It only works if the dipped or main beam
headlamps are on.
Switching on the foglamps is prohibited
in clear weather or in rain, both day and
night. In these situations, the power of their
beams may dazzle other drivers. They must
only be used in fog or falling snow (rules may
vary depending on country).
Dipped or main beam headlamps
Headlamp dipping
Do not forget to switch off the foglamps when
they are no longer necessary.
► Rotate the ring forwards/backwards to turn
it on/off.
When the lighting is switched off automatically
("AUTO" position) the foglamp and the
sidelamps remain on.
Switching off of the lighting when the
ignition is switched off
When the ignition is switched off, all of the
lamps turn off immediately, except for the
sidelamps and the dipped beam headlamps
if automatic guide-me-home lighting is
activated.
Front foglamps/Rear
foglamp
► Pull the lighting control stalk to switch
between dipped and main beam headlamps.
They operate with the sidelamps, dipped
or main beam headlamps on.
65
English 