Get MyCitro?n Drive Plus Guide for Citroen C4 SUV Third Generation (2020-2025)

MyCitroën Drive Plus

The AM radio selection mode is not

available on electric vehicles.

– Voice recognition (depending on equipment).

– Time and outside temperature.

MyCitroën Drive Plus

– Heating/air conditioning system controls and

reminders of settings.

GPS navigation -

Warning

Applications - Multimedia

audio system - Bluetooth^®

telephone

– Settings for driving aid functions, comfort

and safety functions, extended head-up display

(depending on equipment and version), audio

equipment and digital instrument panel.

– Settings for functions speciﬁc to electric

vehicles.

– Display of visual manoeuvring aid functions.

– Interactive handbook.

– Video tutorials (e.g. screen management,

driving aids, voice recognition).

Navigation is a driving aid. It cannot

replace the driver. All guidance instructions

should be carefully checked by the user.

By using the navigation, you accept the

following terms and conditions:

https://www.tomtom.com/en_gb/legal/

eula-automotive/?388448

The functions and settings described

vary according to the version and

conﬁguration of the vehicle, and according to

the country of sale.

First steps

For safety reasons and because they

require continued attention on the part of

the driver, the following operations must be

carried out with the vehicle stationary and

the ignition on:

– Pairing the smartphone with the system via

Bluetooth^®.

– Using the smartphone.

– Connecting to Mirror Screen

(Apple^®CarPlay^®or Android Auto).

– Changing the system settings and

conﬁguration.

Upper banner

The system starts when the ignition is

switched on.

Certain information is displayed permanently in

the upper banner of the touch screen:

– Outside temperature from the vehicle's

sensors (associated with a blue symbol if there is

a risk of ice).

– Temperature setting reminder for the air

conditioning on the driver's and passenger sides.

– Charge level of the connected smartphone.

– System connection status (Bluetooth^®, Wi-Fi,

mobile telephone network).

Short press, ignition oﬀ: system on/oﬀ.

Short press, ignition on: mute/restore sound.

Long press, ignition on: start standby mode

(mute sound, screens and clock display oﬀ).

Rotation: volume adjustment.

Information

This system gives access to the following

elements:

– Audio equipment and telephone controls with

display of associated information.

– Connected services and display of associated

information.

– Navigation system controls and display

of associated information (depending on

equipment).

– Time.

– Quick access to the Mirror Screen^®functions

(associated with a connected smartphone).

Swipe down from the upper edge of the touch

screen to access the notiﬁcations centre and

display a list of quick settings :Guest, Privacy

The message Energy economy mode is

displayed when the system is about to go

into standby.

For more information on Energy economy

mode, refer to the "Practical information"

section.

252

MyCitroën Drive Plus

Settings, Brightness, My Devices, night mode,

etc.

– Navigation history, favourite points of interest

(POIs), navigation settings.

– Some driving aids and the list of favourites.

To delete a proﬁle, select it from the list of

proﬁles then press the bin.

Conﬁguring proﬁles

13

Press the "Settings" application.

Principles

In the list, select the "Proﬁle" tab.

► Use this button (HOME) to display the

most recent home page used; a second

press displays the ﬁrst home page, then press

the virtual buttons displayed on the touch screen.

Scroll through the home pages by sliding

your ﬁnger along the screen to the right or

to the left.

The screen displays a "Guest" proﬁle built

into the system and allows you to create and

personalise several new proﬁles with or without

an associated mobile device.

The "Guest" proﬁle has a default display

with the possibility of adding to it and/or

returning it to its initial conﬁguration. This proﬁle

is built into the system and cannot be deleted.

Each proﬁle created can be associated

with a mobile device of your choice

connected via Bluetooth^®; the Bluetooth^®function

of the mobile device must ﬁrst be activated. This

association allows the system to detect your

presence in the vehicle when it starts and to

propose the activation of your personalised

proﬁle.

If a proﬁle is not connected to the mobile device,

the last proﬁle used will be highlighted.

Select "Create Proﬁle", then follow the

procedure.

Privacy Settings

The "Privacy Settings" management is

associated with each proﬁle. This function is

used with:

a "Guest" proﬁle conﬁgured by default in "Private

Mode",

or

a proﬁle to be created in the system, with or

without connection to a mobile device.

For each proﬁle (even "Guest"), the last privacy

mode saved value will be restored.

"Sharing Data and Location"

This mode allows the vehicle to externally

transmit all the personal data needed for each

valid available connected service.

Principle of movement in the system

Depending on the pages displayed on the

screen, scroll through the text or the menu (on

the left side of the screen) by sliding your ﬁnger,

as with a smartphone.

Touch buttons

Display/hide the context menu.

Return to the previous page.

The personal data required to use the

connected services is sent to the

providers of these services.

► To change the status of a function, press the

description for the corresponding line (change

conﬁrmed by the slider moving to the right/left:

function activated/deactivated).

Creating a new proﬁle allows you to personalise:

– Language, units, Privacy Settings.

– Screen conﬁguration, appearance, My

shortcuts (depending on equipment).

– Audio settings, favourite radio stations.

– Lighting, interior ambience (refer to the "Ease

of use and comfort" section).

"Sharing Data"

Access to additional information about the

function.

Access to a function’s settings.

This mode allows the vehicle to externally

transmit all the data needed for each valid

available connected service, with the exception

of vehicle location data (e.g. GPS coordinates).

Add/delete shortcuts.

Some connected services may not

function without the vehicle location data.

253

MyCitroën Drive Plus

This mode will not be applied to the

emergency call function or to speciﬁc

services to which the user has consented

under the terms of commercial contracts

(e.g. Connected alarm).

OR

will be saved for future uses via the mobile

device connected to the current proﬁle.

An authentication will be requested at each use if

the mobile device is not connected to the current

proﬁle or if the Guest proﬁle is used.

With the use of the “Guest” proﬁle, an

identiﬁcation will be requested for each

use.

Press the "Settings" application.

In the list, select the "Connectivity" tab.

Select "Privacy Settings".

"Private Mode"

This mode does not allow the vehicle to

transmit personal data outside the vehicle.

Choose the mode.

Internet portal

Updating the system

Connected services will only perform

local processing inside the vehicle with

limited functions.

During the ﬁrst use, upon acquisition of the

vehicle, the user is invited to select the country

of residence for the use of the Internet portal.

If the country is not selected, the notiﬁcation is

stored in the notiﬁcation centre and disappears

once the country is selected. Slide a ﬁnger on

the touch screen from top to bottom to display all

the notiﬁcations.

Managing devices remotely and

remote updating of software and

ﬁrmware.

This mode will not be applied to the

emergency call function or to speciﬁc

services to which the user has consented

under the terms of commercial contracts

(e.g. Connected alarm).

Being an integral part of the service used to

provide connected services contract(s), the

required management of devices as well as

the required updating of the software and

ﬁrmware associated with the aforementioned

connected service will be carried out remotely,

in particular using "Over the Air" technology.

To do this, a secure connection via radio

network is established between the vehicle

and the Manufacturer's device management

server each time the ignition is switched on,

when a mobile telephone network is available.

Depending on the vehicle's equipment,

the connection conﬁguration must be set

to "Connected vehicle" to enable to the

connection to the radio network.

The selection of a country is necessary to use

the available internet applications.

Professional purposes

Press the "Settings" application.

If the vehicle is used for professional

purposes or under the terms of speciﬁc

contracts (e.g. corporate ﬂeet, government

assignment), some privacy modes will not

be available for the user on the screen,

depending on the data sharing needs of the

services.

In the list, select the "Connected Services".

Choose the country.

The ﬁrst time you use it, via a connected

mobile device, the system links to your

proﬁle. The connected mobile device serves as

an access key to saved personal information.

First activate the mobile device’s Bluetooth^®

function.

To change mode, swipe down from the upper

edge of the touch screen to display all of the

quick settings.

Irrespective of a valid subscription to a

connected service, the remote management

of devices relating to or connected with

Select the desired application, authentication will

be requested if necessary. This authentication

Press this button and select the chosen

mode. The mode is highlighted.

254

MyCitroën Drive Plus

Press the "Settings" application.

the security of devices, and the updating

of software and ﬁrmware, will be carried

out when necessary in order to comply

with a legal requirement applicable to the

Manufacturer (e.g. the applicable law in terms

of product liability, the regulations governing

e-call) or when necessary to protect the

respective vital interests of the vehicle's users

and passengers.

The establishment of a secure connection via

radio network and the corresponding remote

updates are not aﬀected by the privacy

settings and are intended to be carried out

after being initialised by the user in response

to a related notiﬁcation.

In the list, select the "Updates" tab.

This button allows you to change the

authorisation for automatic downloading

of updates via an exterior Wi-Fi network.

13

In the list, select the "Customization" tab.

Press the "Displays" ﬁeld.

A page divided into 2 parts is displayed.

Press the HOME button at any time to leave this

page.

For safety reasons and because it

requires sustained attention on the part

of the driver, the installation must be carried

out with the ignition on but without starting the

engine.

The installation cannot be carried out in the

following cases:

– engine running.

Personalising the screen

Press the pencil in the "Customize

Touchscreen" part.

A representation of the organisation of the

diﬀerent home page (HOME) Widgets is

displayed.

– emergency call in progress.

– insuﬃcient battery level.

– when charging for electric vehicles.

A Widget is a reduced window of an

application or service.

The system can notify the receipt of an update

when it is connected to an exterior Wi-Fi network

or a mobile telephone network.

Large updates are downloaded only via the Wi-Fi

network.

The availability of an update is notiﬁed on the

screen at the end of the journey with an option

of immediate installation or postponement of

installation.

The installation time is variable and can take

several minutes with a maximum of about 30

minutes. A notiﬁcation will give an estimate of the

duration and a description of the update.

Update information is available through the

"Settings" application.

If an update has failed or has expired, contact a

dealer or a qualiﬁed workshop.

Adding a Widget

The Manufacturer does not charge for

the use of this service.

To add a Widget, press "Widget" on the

left of the screen.

However, the use of Wi-Fi and/or mobile

telephone networks by your smartphone may

incur extra charges if you exceed the data

allowance included in your contract.

Any associated costs will be billed to you by

your mobile telephone operator.

Or

Press one of these buttons on the screen.

Select the desired Widget.

Press the back arrow to return to the

previous page.

Organising the Widgets on a home

page (HOME)

To move a Widget, press and hold it, then drag it

to the desired location.

Personalisation

Press and hold the screen from one of the

Press the "Settings" application.

system's home pages.

Or

255

MyCitroën Drive Plus

Adding a page

Deleting a Widget

Steering-mounted

controls

To add a page, press "Page" on the left of

the screen.

Press the back arrow to return to the

previous page.

To move a Widget to the bin, press and

hold it, then drag it to the bin.

Voice control:

Personalising My shortcuts

(depending on equipment)

Short press, system voice commands

(depending on equipment).

Long press, voice commands of

the smartphone connected using Bluetooth^®or

Mirror Screen^®(Apple^®CarPlay^®/Android Auto)

via the system.

Deleting a Widget

To move a Widget to the bin, press and

hold it, then drag it to the bin.

Personalising the

instrument panel

Increase volume.

Decrease volume.

Mute the sound: long press on the

decrease volume button.

Restore the sound by pressing one of the two

volume buttons.

Press the pencil in the "Customize

Driver Information" part.

From the left or right edge of the screen, swipe

right or left to display the shortcuts.

A representation of six shortcuts appears.

The modiﬁcation of the organisation of the

diﬀerent Widget is displayed on the instrument

panel in real time.

Incoming call (short press): accept the

call.

Call in progress (short press): hang up.

Incoming call (long press): refuse the incoming

call.

Out of call (short press): access the call log of

the telephone connected via Bluetooth^®.

Mirror Screen^®connected (short press): access

the projected view of the telephone application of

your Mirror Screen^®equipment.

Radio: automatic search for the

previous/next station (in the list of

radio stations sorted by name or by frequencies).

Media: previous/next track, movement in the

lists.

These shortcuts can be used to access

an application (e.g. Media, Climate) or to

launch an action (e.g. set the temperature to

21°, call a contact selected in their directory).

A Widget is a reduced window of an

application or service.

Adding a Widget

Brieﬂy press a shortcut to be replaced, a panel is

displayed with all eligible shortcuts. A notiﬁcation

also informs you of the next step to be applied.

Select the desired new shortcut. It will be

duplicated in the My shortcuts page and will

replace the originally selected one. A notiﬁcation

also informs you of this.

To add a Widget, press "Widget" on the

left of the screen.

Or

Press one of these buttons on the screen.

Select the desired Widget.

Press the back arrow to return to the

previous page.

To exit this function at any time, press this

button or press the HOME main button.

Phone: browse the telephone's call log.

256

MyCitroën Drive Plus

Short press: validate a selection. Out of

selection, display the lists.

Telephone not connected: access the menu

allowing you to connect a telephone.

Telephone connected: access the call log,

contacts and telephone settings.

Two connected telephones: access the contents

of the priority telephone with the possibility of

changing the priority of the telephone.

Settings

as soon as the cellular network is not connected

for the ﬁrst time and oﬀers to download it.

To use this new language in all areas, download

it beforehand (ignition on without starting the

engine) via the Wi-Fi network.

Apply the download procedure displayed on the

screen.

Downloading this new language removes the

least used on-board language.

13

Applications

From the home page, press this button to

access the applications wall.

From any page, press the touch screen

with three or more ﬁngers to display the

applications wall.

Main settings for the audio system, touch

screen and digital instrument panel.

Information - Using the

system

When voice commands are activated, say

your command after the audible signal.

For commands in several stages, interaction

takes place with the system to complete the

initial request.

Some commands self-validate after 7 seconds.

If the system has not taken your command into

account, it will indicate this by a voice message

and an on-screen display.

Help

Voice commands

Access the handbook and watch tutorials.

Media

Select an audio source or radio station.

Mirror Screen^®

First steps

(depending on equipment)

Smartphone connected with Mirror

Screen^®: access to the projected view of

Apple^®CarPlay^®or Android Auto.

Smartphone not connected: access the menu

allowing you to connect a smartphone.

Navigation

(depending on equipment)

Enter navigation settings and choose a

destination.

The voice recognition service oﬀers a choice

of 17 languages minimum (French, German,

English (UK), English (US), Arabic, Brazilian,

Chinese, Spanish, Hebrew, Italian, Japanese,

Dutch, Polish, Portuguese, Russian, Swedish,

Turkish) available with the cellular network and

in line with the language chosen and previously

conﬁgured in the system.

The system supports two languages for cases

where the area in which the vehicle is travelling

is not covered by the cellular network.

These languages, referred to as on-board

languages, are downloaded into the system.

If the chosen language has not been

Opening voice recognition

Voice commands can be used on any

screen page, provided there are no other

sources which take priority in use (reverse,

emergency or assistance call, telephone call,

other smartphone voice recognition already

launched).

Use services available in real time, depending on

equipment.

Voice commands

(depending on equipment)

Use the system or smartphone voice recognition

via the system.

Choice of opening voice recognition:

► Say “Hello Citroën”.

or

downloaded, a message on the screen appears

Phone

257

MyCitroën Drive Plus

► Press the button located on the steering

wheel.

or

"tune to 88.5"

Media voice commands are only

Navigation

available with a USB connection.

Navigation home screen

(depending on equipment)

► Press the touch screen button.

Voice command example for navigation:

"navigate home"

"Navigate me to gabrielle's house"

"search for public parking nearby"

To ensure that voice commands are

always recognised by the system, please

follow these recommendations:

– Use natural language in a normal tone

without breaking up words or raising your

voice.

– After opening voice recognition with the

steering wheel-mounted button or the button

on the touch screen, always wait for the

"beep" (audible signal) before talking. No

"beep" sounds when voice recognition is

opened using "Hello Citroën".

– For optimal operation, it is recommended

that you close the windows and the sunroof

(depending on equipment) to avoid any

external interference, and switch the

ventilation oﬀ.

Access to additional videos

Depending on the country, give

destination (address) instructions in the

language conﬁgured for the system.

https://www.tomtom.com/

PSAGroup-Connected-Nav

Voice command example for telephone:

"Call Matthew's mobile"

"call 0113 345 9869"

Press the "Navigation" application to

display the navigation home screen.

Press "Search" to enter an address or a

name.

Press this button to display the main

menu for the various options.

Press this button to display the 3D/2D

mode.

"Call jonathan"

If there is no telephone connected by

Bluetooth^®, a voice message announces:

"Connect a telephone by Bluetooth^®", and the

voice session will be closed.

– Before speaking the voice commands, ask

the other passengers not to speak.

Voice command example for the weather:

"do i need a raincoat"

"how is the weather tonight"

Select "Sound activated", "Alerts only"

and "Silent" with successive presses on

this button.

Voice command example for air

conditioning:

"raise the fan speed"

"Turn on air conditioning"

"i'm too hot"

Voice command example for radio and

media:

"I want to listen to michael jackson"

"switch to radio"

"what is today's humidity level"

Press the "plus"/"minus" buttons to zoom

in/out, or use two ﬁngers on the screen.

Main menu

Press the "Navigation" application to

display the navigation home screen.

Press this button to display the main

menu for the various options.

258

MyCitroën Drive Plus

Select "Search" to enter an address,

name or some points of interest.

Regular connection to a secure Wi-Fi

access point automatically updates the

installed mapping globally.

The mapping is also updated using a cellular

network, depending on version, country of

sale, the vehicle's level of equipment, as well

as the subscription to connected services and

options.

However, using your smartphone's Wi-Fi

and/or cellular networks may incur additional

charges if you exceed your data plan.

These charges, if any, will be passed on to

your telephone operator's bill.

The mobile device is in charging mode when

connected with the USB cable.

13

Select "Go home" using an address

previously saved in "Add home".

Select "Go to work" using an address

previously saved in "My places".

Select "Recent destinations" to display

the latest destinations searched.

It is recommended that you use your

device's original USB cables, preferably

with a short cable to ensure optimum

performance.

To protect the system, do not use a USB

hub.

Select "Current trip" to open another

menu and perform various actions for the

current planned route.

Bluetooth^®connection

Select "My places" for quick access to

saved places as well as favourite

Connecting a mobile device to the vehicle's

system via Bluetooth^®provides access to its

contents and its "Media" streaming. It also

enables the Phone function to be activated.

The connection can be initiated either from the

mobile device's Bluetooth^®menu or from the

vehicle's system, which requires opening the "My

Devices" menu for the ﬁrst connection.

destinations.

Select "My trips" to display your favourite

routes.

Select "Parking" to display the various

parking options in the area.

Connectivity

Connecting a wired device

by USB

The USB connection of a mobile device allows it

to be recharged. It makes its authorised media

content available to the system (Media content

of iPod^®type).

Only one USB socket will allow a Mirror

Screen connection (Apple^®CarPlay^®or

Android Auto) for the compatible connected

mobile devices and to use some of the device's

applications on the touch screen.

For more information on the USB socket

compatible with the Mirror Screen^®function,

refer to the "Ease of use and comfort - Fittings"

section.

Select "Service station" to display the

diﬀerent service stations on the current

route or near the current location.

Select "TomTom service" to check the

network status.

Select "Settings" to enter the vehicle type

and to personalise the display, voice

instructions, map options, trip planning, sounds

and alerts, and system information.

Select this button to display details on

software versions as well as legal

information. Details of the Open Source software

libraries used and their licence URLs.

In some cases, you will need to unlock

your device and check the authorisation

to synchronise contacts and recent calls.

Some features may not be supported by your

device.

For information on the partial or full

compatibility of device models or

smartphones, please connect to the Brand’s

national website.

259

MyCitroën Drive Plus

Pairing procedure from a device

This is to allow the system to make its

Bluetooth^®visible for the connection of a new

device.

The system is disconnected when the driver’s

door is opened and the ignition is switched

oﬀ.

allowed to connect. WPA2 encryption level,

equivalent to a domestic level, is required.

From the Bluetooth^®menu on your mobile

device, select the system’s name from the

list of detected devices.

Any network already connected to the

system will reconnect automatically as

soon as it is detected by the system and after

having previously activated the Wi-Fi function.

In order to make your system’s

Bluetooth^®visible, ﬁrst open the "My

Devices" menu on the system.

Automatic reconnection

The Wi-Fi connection of the system to a

device already connected using a Mirror

Screen^®wireless connection is not possible.

In this case, favour a Mirror

Continue the ﬁrst connection procedure

proposed by the system and on the device.

For example: validating pairing codes.

The system allows automatic reconnection of

devices already connected and detected when a

user proﬁle is selected.

The priority reconnected devices are those which

have been linked to the selected user proﬁle or,

failing this, the last connected devices.

Pairing procedure from the system

Screen^®connection using the USB socket.

Press the "Settings" application.

Device management

In the list, select the "Connectivity" tab.

Select "My Devices".

Wi-Fi connection

The system has an external Wi-Fi connection

mode for performing system updates.

Press the "Settings" application.

For each device already connected to the

system using a wireless connection (Bluetooth^®

or wireless Mirror Screen^®connection), it is

possible to determine a preferred connection

mode (depending on the functions the device

can support). It is therefore possible to determine

whether the device should be connected using

a wireless Bluetooth^®connection or a wireless

Mirror Screen^®connection each time the system

is started once the proﬁle is chosen.

Select the name of the mobile device that

you want to connect, from:

– The list of known devices (if the device has

already been connected to the system).

or

– The list of detected devices (if the device

has never been connected to the system or

previously deleted from the system).

In the list, select the "Connectivity" tab.

Select "Wi-Fi".

Activate/Deactivate "Wi-Fi".

The system starts a search for

nearby Wi-Fi networks. This may take a few

seconds.

Select the Wi-Fi network to connect to and enter

its password.

Press the "Settings" application.

A mobile device already connected to the

system will be able to reconnect

automatically when the vehicle is started,

once the user proﬁle has been selected.

Automatic reconnection is put on hold as

soon as the "My Devices" menu is opened.

In the list, select the "Connectivity".

Select "My Devices" to display the list of

paired devices.

To protect your system, only networks

with a suﬃcient level of security are

Press this button to manage the

connection of a device.

260

MyCitroën Drive Plus

Choose a connection type then conﬁrm this

choice by pressing “APPLY".

First activate the Siri^®function on your

Apple^®smartphone.

If the device fails to connect, refer to the

Apple website to check that the device is

compatible with this function.

The wireless connection of an Apple^®CarPlay^®

smartphone can be initiated from the "My

Devices" menu.

First activate the smartphone’s CarPlay^®

function.

13

Deleting a device

Press the "Settings" application.

If the problem persists, delete all saved

connections on the smartphone and on the

system before attempting a new connection.

In the Bluetooth menu, click on the "i" next to

the relevant vehicle and activate CarPlay.

Press the "Settings" application.

In the list, select the "Connectivity".

Select "My Devices" to display the list of

paired devices.

The cable connection requires that you

deactivate the CarPlay function in the Settings,

Bluetooth menu of your smartphone.

In the Bluetooth menu, click on the "i" next to

the relevant vehicle and deactivate CarPlay.

Connect the smartphone to the system

using the USB socket compatible with

Mirror Screen.

Apple^®CarPlay^®is automatically launched a few

seconds after the USB connection has been

established. In some cases, it may be necessary

to unlock your device.

The smartphone charges when connected by the

USB cable.

The cable connection allows you to avoid

disconnections, especially when passing through

toll booths.

In the list, select the "Connectivity".

Select "My Devices" to display the device

to be connected to Apple^®CarPlay^®.

If the device has already been connected to the

system via Bluetooth^®, select the device settings

from the list of known devices and choose

Apple^®CarPlay^®as the wireless connection

mode.

If the device has never been connected to the

system before, it will have to be paired (refer to

the "Bluetooth^®connection" section).

The system detects if the smartphone is

compatible with Apple^®CarPlay^®and oﬀers to

connect to it following the pairing process.

Subsequent automatic connection of the

smartphone requires activation of the Bluetooth^®

on your device.

Press this button.

Press "DELETE".

Conﬁrm by pressing “YES”.

Some devices that have just been

deleted from the system request a

connection, refuse this request.

Mirror Screen^®

When a smartphone is connected using

Mirror Screen^®, the vehicle's location and

some vehicle data is sent to the smartphone

(e.g. brand, left-hand or right-hand drive, day/

night mode, physical speed).

As soon as the connection is established,

press this button to display the

Only one USB socket enables the Mirror

Screen^®connection (Apple^®CarPlay^®);

refer to the "Ease of use and comfort

- Fittings" section.

It is recommended that you use the device's

original USB cables, preferably with a short

cable to ensure optimum performance.

Apple^®CarPlay^®smartphone

connection

"Apple^®CarPlay^®" interface.

To initiate the smartphone voice

commands, press and hold the steering-

mounted control button.

Connecting just one Apple^®CarPlay^®smartphone

can be carried out either by USB cable or using

a wireless connection.

261

MyCitroën Drive Plus

smartphone has to be followed for the ﬁrst

connection, with the vehicle stationary.

The smartphone charges when connected by the

USB cable.

The cable connection allows you to avoid

disconnections, especially when passing through

toll booths.

If the device has already been connected to the

system via Bluetooth^®, select the device settings

from the list of known devices and choose

Android Auto as the wireless connection mode.

The subsequent automatic connection of the

smartphone requires activation of Bluetooth^®on

your device.

As soon as the connection is established,

press this button to display the "Android

Auto" interface.

Android Auto smartphone

connection

Connecting just one Android Auto smartphone

can be carried out either by USB cable or using

a wireless connection.

First install the "Android Auto"

application via "Play Store" on your

smartphone.

The "Android Auto" function requires a

compatible smartphone.

If the device fails to connect, refer to the

Android Auto website to check that the device

is compatible with this function.

Only one USB socket enables the Mirror

Screen^®connection (Android Auto); refer

to the "Ease of use and comfort - Fittings"

section.

It is recommended that you use the device's

original USB cables, preferably with a short

cable to ensure optimum performance.

To initiate the smartphone voice

commands, press and hold the steering-

mounted control button.

If the problem persists, delete all saved

connections on the smartphone and on the

system before attempting a new connection.

To ensure an optimum wireless connection,

we recommend avoiding placing your

smartphone too close to other Wi-Fi networks

to which it can connect automatically.

Media

The wireless connection of an Android Auto

smartphone can be initiated from the "My

Devices" menu.

First activate the smartphone’s Android Auto^®

wireless function, in the Settings menu of the

"Android Auto" application of your smartphone.

Press the "Settings" application.

Changing source

Press the "Media" application.

Press this button to change source (radio,

audio streaming via a USB socket,

Bluetooth^®or Mirror Screen^®).

The cable connection requires that you

deactivate the Android Auto wireless function,

in the Settings menu of the "Android Auto"

application of your smartphone.

In the list, select the "Connectivity" tab.

Select "My Devices" to display the device

to be connected to Android Auto.

Selecting a radio station

Press the "Media" application.

Connect the smartphone to the system

using the USB socket compatible with

Mirror Screen^®.

Android Auto is automatically launched a few

seconds after the USB connection has been

established. A validation procedure on the

If the device has never been connected to the

system before, it will have to be paired (refer to

the "Bluetooth^®connection" section).

The system detects if the smartphone is

compatible with Android Auto and oﬀers to

connect to it following the pairing process.

In the list, select the "Player" tab.

Press one of the buttons to

perform an automatic search for

radio stations.

Or

262

MyCitroën Drive Plus

Move the slider to manually search for

frequencies up or down.

Storing takes place via a short or long

press on one of these buttons, or a long

press on an existing favourite radio station,

which will be replaced.

Changing the waveband

13

Press the "Media" application.

Or

Press this button.

In the list, select the "Player" tab.

Press this button to change the waveband

(FM - AM - DAB) according to the country

of sale.

Press this button to return to the previous

page.

Enter the frequency values using the

virtual keypad.

Press this button to conﬁrm.

Automatic search for radio

stations

Via the "Media" application.

Press the "Media" application.

Activating traﬃc

announcements

A list of stations is available by pressing the

“Stations” tab.

This function gives priority to listening to Traﬃc

announcements alert messages. To be active,

this function needs good reception of a radio

station that transmits this type of message.

While traﬃc information is being broadcast, the

current radio station is automatically interrupted

so that the message can be heard. Normal radio

listening resumes as soon as the message is

ﬁnished.

Press “Mute” to activate/deactivate the

sound.

In the list, select the "Stations" tab.

The search is carried out automatically.

Using the steering-mounted controls,

press this button.

Radio reception may be aﬀected by the

use of electrical equipment not approved

by the Brand, such as a charger with USB

socket connected to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may block

reception, including in RDS mode. This

phenomenon is normal in the propagation

of radio waves and does not indicate any

malfunction of the system.

The search is carried out automatically.

Activating radio station

tracking

The system changes frequency automatically to

obtain better reception.

Press the "Media" application.

In the list, select the "Settings” tab.

Activate “Traﬃc Announcement (TA)”.

Press the "Media" application.

The lighting of the slider conﬁrms that the

function is activated.

In the list, select the "Settings” tab.

Activate “Radio Station Tracking”.

Storing a radio station

Select a station.

Press the "Media" application.

Audio streaming

The lighting of the slider conﬁrms that the

function is activated.

The streaming function allows you to listen to

the audio stream coming from the smartphone(s)

connected via Bluetooth^®, USB (iPod^®type) or

Mirror Screen^®.

In the list, select the "Player” tab.

Press the "Radio Favorites" button.

263

MyCitroën Drive Plus

First adjust the volume on the portable device (to

a high level).

To avoid reading and display problems, we

recommend choosing ﬁle names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

Use only USB memory sticks in FAT32 format

(File Allocation Table).

Conﬁguring audio and radio

settings

Audio settings can be accessed in 2 diﬀerent

ways.

Via the Media application

Press the "Media" application.

Then adjust the volume of the system.

If playback does not start, it may be necessary to

start the audio playback from the smartphone.

Control is from the portable device or by using

the system's touch buttons.

We recommend using the original USB

cable for the portable device.

Once connected in streaming mode, the

smartphone is considered to be a media

source.

In the list, select the "Settings" tab.

Or

Via the Settings application

Press the "Settings" application.

Phone

Playing a track

In the list, select the "Audio and Radio" tab.

It is possible to conﬁgure:

– Sound Settings.

– Radio Settings.

– Volume Settings.

Receiving a call

An incoming call is announced by a ring and a

display overlaid on the screen.

Accepting the call:

brieﬂy press the telephone button on the

steering-mounted controls to accept an

incoming call.

Press the "Media" application.

If several devices are connected, press

this button to select one.

Once the device is connected, browsing through

the ﬁles is possible by pressing the "Playlist" or

"Library" button.

Short press: go to the previous/

next track.

Long press: fast-forward/rewind in a track.

Repeat the current title or the list of

selected titles.

Information and advice

The system supports USB Mass Storage devices

or Apple^®devices via the USB sockets. The

adapter cable is not supplied.

Devices are managed using the audio system

controls.

The system will only play audio ﬁles with ".wma,

.aac, .ﬂac, .ogg, .mp3" ﬁle extensions, at bit rates

between 32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other ﬁle types (".mp4", etc.) can be read.

".wma" ﬁles must be of the WMA 9 standard.

The supported sampling rates are 32, 44 and

48 KHz.

Or

Press this touch screen button.

Ending the call:

press and hold...

Random track playback.

...the telephone button on the steering-

mounted controls to refuse the call.

Or

Sound deactivation/reactivation.

Press this touch screen button.

264

MyCitroën Drive Plus

Press the "Phone" application.

Press this button on the touch screen to

send an automatic message indicating

that you are driving.

It is always possible to make a call

directly from the telephone; as a safety

measure, ﬁrst park the vehicle.

13

Press this button to change the priority of

the phone.

Making a call

Calling a contact

Settings

Using the telephone is strongly

discouraged while driving.

Park the vehicle.

Press the "Phone" application.

In the list, select the "Contacts” tab.

Select the desired contact in the displayed list.

Call the contact by selecting one of the

contact's phone numbers.

Conﬁguring the screen

display

Making a call using the numeric

keypad

Press the "Settings" application.

Press the "Phone" application.

In the list, select the "Customization" tab.

It is possible to conﬁgure:

– the screen colours associated with the interior

ambient lighting. Refer to the "Ease of use and

comfort" section.

– the sound ambience.

– the visual welcome and goodbye animations.

– the screen transition animations.

Organising the contact list

Press the "Phone" application.

In the list, select the “Keypad” tab then dial the

number.

In the list, select the “Settings” tab to display the

telephone-related settings.

Press this button to make the call.

Choose to list the contacts starting with

their ﬁrst or last name.

Making a call using the list of recent

calls

Connecting two phones

Managing the system

Press the "Phone" application.

The system allows two phones to be

connected simultaneously:

– 2 via Bluetooth^®connection.

or

– 1 via Bluetooth^®connection and 1 via Mirror

Screen^®connection.

connectivity

In the list, select the "Calls" tab.

Or

Brieﬂy press...

...the telephone button on the steering-

mounted controls.

Select and call one of the most recent numbers

called in the list.

Press the "Settings" application.

In the list, select the "Connectivity" tab.

It is possible to manage:

– The Bluetooth^®connection.

– The Mirror Screen^®smartphone connections

(Apple^®CarPlay^®/Android Auto).

– The Wi-Fi connection.

Display and content priority is given to the last

phone used.

To change the priority of the phone:

– The privacy mode.

265

MyCitroën Drive Plus

Press the back arrow to return to the

previous page.

Press the “Time Settings” line then set the time.

Press "OK" to conﬁrm.

It presents the diﬀerent possibilities for accessing

the information sought:

Conﬁguring the system

Press the "Settings" application.

Visual search

Access to subjects via pictures

representing the exterior and interior of the

vehicle.

In the list, select the "System” tab.

It is possible to conﬁgure:

– the language.

Press the “Date” line then set the date.

Press "OK" to conﬁrm.

Indicator lamps

– the date & time.

Access to the descriptions/operation of

the instrument panel warning/indicator lamps.

System

Access to sections dedicated to the

various audio equipment and telematics

systems.

– the unit of distance and consumption

(kWh/100 miles - miles, mi/kWh - miles, km/kWh

- km).

– the temperature unit (Fahrenheit, Celsius).

It is also possible to reset the system

conﬁguration.

Select the Time Format (12h/24h).

Select the Date Format.

The system does not automatically

change between winter and summer time

(depending on the country of sale).

Contents

Access to subjects via the main sections

of the handbook.

Selecting the language

Select "Language" to change the

language.

Press the desired language.

Visual search

Help

Press Visual search.

Press the "Help" application.

Press the back arrow to return to the

previous page.

Press one of the pictures located at the bottom

of the screen.

Press one of the bullet points in the

enlarged view.

There are two cases:

– Direct display of the subject, if only one

subject is associated with the bullet point.

– Display of a list of subjects, if several subjects

are associated with the bullet point.

In the list, select the “User Manual” tab to

consult the vehicle’s handbook.

or

In the list, select the “Tutorials” tab to watch

explanatory videos for a quick start on screen

management, certain driving aids and voice

recognition.

Setting the date and time

Select “Date and Time” to modify the date and

time.

“Automatic Date and Time” is activated

by default, so that the setting is made

automatically according to your geolocation.

To adjust manually, deactivate “Automatic Date

and Time”.

User Manual

Indicator lamps

Select the display language.

Press the “Select Time Zone” ﬁeld then deﬁne

a time zone.

Press Indicator lamps.

The handbook home page is displayed.

266

MyCitroën Drive Plus

The mosaic of warning/indicator lamps is

displayed.

The warning/indicator lamps are sorted by

colour.

Back to the list of subjects.

13

Press the warning/indicator lamp concerned; the

corresponding content is displayed.

Back to the mosaic of warning/indicator

lamps.

System

Press System.

The list of audio and telematics systems is

displayed.

Press on the section concerned; the list of

subjects is displayed.

Press on the subject concerned;

the corresponding content is displayed.

If the subject has more than one page,

drag horizontally.

Back to the list of subjects.

Contents

Press Contents.

The list of sections is displayed.

Press on the section concerned; the list of

subjects is displayed.

Press on the subject concerned;

the corresponding content is displayed.

If the subject has more than one page,

drag horizontally.

267

MyCitro?n Drive Plus for Your Citroen C4 SUV Third Generation (2020-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals