Get Audio and Telematics -> 7-inch touch screen tablet Guide for Citroen C5 Suv Second Generation (2008-2017)

Audio and Telematics

Localised Assistance Call

Press this button for more than

2 seconds to request assistance

if the vehicle breaks down.

A voice message confirms that

the call has been made**.

Operation of the system

If you purchased your vehicle outside

the CITROËN dealer network, we

suggest that you have a dealer check

and, if desired, modify the configuration

of these services.

When the ignition is switched on,

the green indicator lamp comes

on for 3 seconds indicating that

the system is operating correctly.

In a multi-lingual country, configuration

is possible in the official national

language of your choice.

If the orange indicator lamp

flashes then goes off: the system

has a fault.

Pressing this button again immediately cancels

the request.

The cancellation is confirmed by a voice

message.

If the orange indicator lamp is on fixed: the

back-up battery should be replaced.

In both cases, the emergency and assistance

calls service may not work.

Contact a qualified repairer as soon as

possible.

For technical reasons, particularly

to improve the quality of Telematic

services to customers, the

manufacturer reserves the right to

carry out updates to the vehicle's

on-board telematic system.

Geo-location

You can deactivate geo-location by

simultaneously pressing the "Localised

Emergency Call" and "Localised Assistance

Call" buttons, followed by a press on "Localised

Assistance Call" to confirm.

The fault with the system does not

prevent the vehicle being driven.

** Depending on the geographic cover for

"Localised Emergency Call", "Localised

Assistance Call" and the official national

language selected by the owner of the

vehicle.

The list of countries covered by Telematic

services is available at dealers or

at www.citroen.co.uk.

To reactivate geo-location, simultaneously

press the "Localised Emergency Call" and

"Localised Assistance Call" buttons again,

followed by a press on "Localised Assistance

Call" to confirm.

.

251

Audio and Telematics

7-inch touch screen tablet

GPS satellite navigation - Multimedia audio - Bluetooth^®telephone

Contents

First steps

254

Steering mounted controls

256

257

258

266

270

272

278

280

282

284

292

296

298

306

Menus

Navigation

Navigation - Guidance

Trafﬁc

Radio Media

Radio

DAB (Digital Audio Broadcasting) radio

Media

Settings

Connected services

MirrorLink^TM

CarPlay^®

Telephone

Frequently asked questions

As a safety measure, the driver should only carry out operations

which require prolonged attention while the vehicle is stationary.

The display of an energy economy mode message signals that

electrical systems operating are going into standby.

The system is protected in such a way that it will only operate in

your vehicle.

Refer to the energy economy mode section.

.

253

Audio and Telematics

First steps

Use the buttons arranged below the touch

screen tablet for access to the menu carousel,

then press the virtual buttons in the touch

screen tablet.

Each menu is displayed in one or two pages

(primary page and secondary page).

In very hot conditions, the system may

go into stand-by (screen and sound

completely off) for a minimum period of

5 minutes.

Primary page

Secondary page

254

Audio and Telematics

Short-cuts: using the touch buttons in the upper

band of the touch screen tablet, it is possible to

go directly to the selection of the audio source

or the list of stations (or titles, depending on the

source).

In very high temperatures, the volume

may be limited to protect the system.

The return to normal takes place when

the temperature in the passenger

compartment drops.

The screen is of the "resistive" type, it

is necessary to press firmly, particularly

for "flick" gestures (scrolling through a

list, moving the map...). A simple wipe

will not be enough. Pressing with more

than one finger is not recognised.

The screen can be used when wearing

gloves. This technology allows use at

all temperatures.

Press Menu to display the menu

carousel.

Volume adjustment (each source is

independent, including traffic announcements

(TA) and navigation instructions).

Selecting the audio source (depending on

version):

-

"FM" / "DAB"* / "AM"* stations.

"USB" memory stick.

Smartphone via MirrorLink^TMor CarPlay^®.

Telephone connected by Bluetooth^®* and

Bluetooth^®audio streaming*.

Increase volume.

Reduce volume.

To clean the screen, use a soft

non-abrasive cloth (spectacles cloth)

without any additional product.

Do not use pointed objects on the

screen.

-

Media player connected to the auxiliary

socket (jack, cable not supplied).

Mute the sound by pressing simultaneously on

the volume increase and reduce buttons.

Unmute the sound by pressing one of the two

volume buttons.

Do not touch the screen with wet

hands.

.

* Depending on equipment.

255

Audio and Telematics

Steering mounted controls

Activate/deactivate "Black Panel"

mode - black screen (night driving).

Radio, rotate: select the previous /

next preset station.

Radio: automatic search for a higher

frequency.

Media, rotate: select the previous /

next track.

Press: return to navigation.

Media: select the next track.

Media, press and hold: fast forward.

Jump in the list.

Telephone: make a call.

Call in progress: access to the

telephone menu (end call, secret

mode, hands-free mode).

Telephone, press and hold: reject an

incoming call, end a call; when there

is no call in progress, access to the

telephone menu.

Abandon the current operation.

Go up a level (menu or folder).

Radio: automatic search for a lower

frequency.

Media: select the previous track.

Media, press and hold: rewind.

Jump in the list.

Display the menu carousel.

Increase volume.

Decrease volume.

Mute.

Radio: display the list of stations.

Media: display the list of tracks.

Radio, press and hold: update the list

of stations received.

Press the end of the lighting control stalk to

start voice recognition on your smartphone via

the system.

Display the menu

carousel.

256

Audio and Telematics

Menus

Navigation

Settings

Radio Media

(Depending on equipment)

Select an audio source, a radio station, display

photographs.

Adjust the settings for sound (balance,

ambience, ...) and the display (language, units,

date, time, ...).

Enter navigation settings and choose a

destination.

Connected services

Telephone

Driving

(Depending on equipment)

Connect a telephone by Bluetooth^®.

Access to the CarPlay^®function after

connection of your smartphone by USB cable.

Access to the trip computer.

Activate, deactivate or enter settings for certain

vehicle functions.

Operate certain applications on your

smartphone via MirrorLink^TMor CarPlay^®.

.

257

Audio and Telematics

Navigation

Level 1

Level 2

Level 3

Navigation

Route settings

258

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Display recent destinations

Enter destination

Fastest

Shortest

Time/distance

Ecological

Tolls

Choose the navigation criteria.

The map displays the route chosen according to

these criteria.

Route settings

Ferries

Navigation

Traffic

Settings

Navigation

Strict-Close

Show route on map

Confirm

Display the map and start navigation.

Save the options.

Save current location

Stop navigation

Save the current address.

Delete the navigation information.

Choose the volume for voice and announcement

of street names.

Voice synthesis

Diversion

Detour from your initial route by a determined

distance.

Display in text mode

Zoom in.

Zoom out.

Navigation

Display in full screen mode.

Use the arrows to move the map.

Switch to 2D map.

.

259

Audio and Telematics

Level 1

Level 2

Level 3

Address

Enter destination

For managing contacts and

their addresses, refer to the

"Telephone" section.

Navigation

Contacts

To use the telephone functions,

refer to the "Telephone" section.

260

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Current loc.

Point of interest

Town center

Save

Address settings

Address

Save the current address.

Add a waypoint to the route.

Press to calculate the route.

Add waypoint

Navigate to

Addresses

View

Navigation

Secondary page

Enter destination

Contacts

Navigate to

Search for contact

Call

Select a contact then calculate the route.

Display the map and zoom to view the roads.

On the map

Itinerary

Create, add or delete a waypoint or view the

itinerary.

Stop

Delete navigation information.

Press to calculate the route.

Navigate to

.

261

Audio and Telematics

Level 1

Level 2

Level 3

Navigation

Search for a point of interest

Point of interest displayed on the map

262

Audio and Telematics

Level 1

Level 2

All POIs

Level 3

Comments

Navigation

Secondary page

Search for POI

List of categories available.

After choosing the category, select the points of

interest.

Motor

Dining/hotels

Personal

Search

Save the settings.

Select all

Delete

Navigation

Secondary page

Show POIs

Choose the display settings for POIs.

Save the options.

Import POIs

Confirm

.

263

Audio and Telematics

Level 1

Level 2

Level 3

Diversion

Traffic messages

Map settings

Navigation

Settings

Moving

between

the two

menus.

Settings

264

Audio and Telematics

Level 1

Level 2

Level 3

Comments

On the route

Around vehicle

Near destination

Navigation

Settings for the choice of messages and the

filter radius.

Secondary page

Traffic messages

Detour over a distance

Recalculate route

Detour

Finish

Save your selections.

Flat view north heading

Flat view vehicle heading

Perspective view

Orientation

Maps

Navigation

Secondary page

Map settings

Choose the display and orientation of the

map.

"Day" map colour

"Night" map colour

Auomatic day/night

Aspect

Confirm

Save the settings.

Route settings

Voice

Navigation

Secondary page

Settings

Enter settings and choose the volume for the

voice and announcement of street names.

Alarm!

Traffic options

Confirm

Save your selections.

.

265

Audio and Telematics

Navigation - Guidance

Choosing a new destination

Towards a new destination

Press on Navigation to display the

primary page.

Select "Save" to save the address

entered as a contact entry.

To delete navigation information,

press on "Settings".

The system allows up to 200 entries.

Press on the secondary page.

Select "Enter destination".

Select "Address".

Press on "Stop navigation".

Select "Navigate to".

To resume navigation press on

"Settings".

Choose the navigation criteria:

"Fastest" or "Shortest" or "Time/

distance" or "Ecological".

Press on "Resume guidance".

Select the "Country:" from

the list offered, then in the

same way the "City:" or its

post code, the "Road:", the

"N°:".

Choose the restriction criteria:

"Tolls", "Ferries", "Traffic", "Strict",

"Close".

Select "Confirm".

Confirm each time.

Or

Press on "Show route on map" to

start navigation.

266

Audio and Telematics

Towards a recent destination

Towards a contact

Press on Navigation to display the

primary page.

Select a destination from

the contacts in the list

offered.

To be able to use navigation "towards

a contact in the directory", it is first

necessary to enter the address for your

contact.

Press on the secondary page.

Select "Navigate to".

Press on Navigation to display the

primary page.

Select "Enter destination".

Select the criteria then "Confirm" to

start navigation.

Press on the secondary page.

Select "Enter destination".

Select "Contacts".

Select an address from

the list offered.

Select "Navigate to".

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

.

267

Audio and Telematics

Towards GPS coordinates

Towards a point on the map

Towards points of interest (POI)

Press on Navigation to display the

primary page.

Press on Navigation to display the

primary page.

Points of Interest (POI) are listed in different

categories.

Press on the secondary page.

Select "Enter destination".

Select "Address".

Press on the secondary page.

Select "Enter destination".

Select "On the map".

Press on Navigation to display the

primary page.

Press on the secondary page.

Select "Search for POI".

Enter the "Longitude:"

then the "Latitude:".

Zooming in on the map shows points with

information.

Select "All POIs",

A long press on a point opens its content.

Or

Select "Navigate to".

"Motor",

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

Or

"Dining/hotels".

268

Audio and Telematics

An annual mapping update allows new

points of interest to be presented to

you.

You can also update the Risk areas /

Danger areas every month.

The detailed procedure is available on:

http://citroen.navigation.com.

.

269

Audio and Telematics

Trafﬁc

Risk areas / Danger zone

alert settings

Traffic information

Display of messages

Press on Navigation to display the

primary page.

This series of alerts and displays is

only available if Risk areas have first

been downloaded and installed on the

system.

Press on the secondary page.

Select "Settings".

Select "Traffic messages".

Choose filter settings for:

Select "Alarm!" (Alert).

"On the route",

It is then possible to activate Risk areas alerts

then:

"Around",

-

"Audible warning"

"Alert only when navigating"

"Alert only for overspeed"

"Display speed limits"

Timing: the choice of timing allows the

time before giving a Risk areas alert to be

defined.

"Near destination", filters to fine-

tune the list of messages.

Press again to remove the filter.

Select "Confirm".

270

Audio and Telematics

Setting ﬁlters

Receiving TA messages

Select the message from

the list offered.

Press on Navigation to display the

primary page.

Press on Navigation to display the

primary page.

Press on the secondary page.

Select the magnifying glass to have

voice information.

Select "Settings".

Select "Voice".

TMC (Traffic Message Channel)

messages on GPS-Navigation contain

traffic information transmitted in real

time.

Select "Traffic options".

Select:

Activate / Deactivate

-

"Be advised of new messages",

"Speak messages".

"Traffic (TA)".

The TA (Traffic Announcement)

function gives priority to TA alert

messages. To operate, this function

needs good reception of a radio station

transmitting this type of message.

When a traffic report is transmitted,

the current audio source is interrupted

automatically to play the TA message.

Normal playback of the audio source

resumes at the end of the transmission

of the message.

Then enter the filter radius.

Select "Confirm".

We recommend a filter radius of:

-

12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

.

271

Audio and Telematics

Radio Media

Level 1

Level 2

List of FM stations

Save

272

Audio and Telematics

Level 1

Level 2

Comments

Radio Media

List of FM stations

Press on a radio station to select it.

List

FM Radio

DAB Radio

AM Radio

USB

Radio Media

Source

MirrorLink

CarPlay

iPod

Select change of source.

Bluetooth

AUX

Radio Media

Save (preset)

Press an empty location to Save it.

.

273

Audio and Telematics

Level 1

Level 2

Level 3

List of FM stations

Media

Photos

274

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Save

Press a radio station to select it.

Update the list of stations received.

Enter the desired radio frequency.

Save the settings.

Radio Media

Secondary page

Radio list

Update list

Frequency

Confirm

Home screen

Rotate

Display the selected photo in the home page.

Rotate the photo 90°.

Radio Media

Secondary page

Photos

Select all the photos in the list.

Press again to deselect.

Select all

Previous photo.

Pause / Play.

Next photo.

Display the photos in sequence, full-screen.

The system supports the following image formats:

.gif, .jpg, .bmp, .png.

Slideshow

Full screen

Display the selected photo full-screen.

.

275

Audio and Telematics

Level 1

Level 2

Level 3

Media

Settings

276

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Radio Media

Secondary page

Media list

Presentation of the last media used.

Shuffle (all tracks)

Media

Shuffle (current album)

Choose the play settings.

Settings

Repeat

Aux. amplification

RDS options

Radio Media

Secondary page

Settings

DAB/FM station tracking

Display Radio Text

Radio

Activate or deactivate the settings.

Settings

Digital radio slideshow

display

Traffic announcements (TA)

News - Weather

Announcements

Settings

Activate or deactivate the settings.

Save the settings.

Sport - Programm info

Flash - Unforeseen

events

Confirm

.

277

Audio and Telematics

Radio

Selecting a station

Changing a radio frequency

Press on Radio Media to display the

Select "Save".

Press on Radio Media to display the

primary page.

Select a preset radio station

Select "List" in the primary page.

in the list.

If necessary, select change of

source.

By automatic frequency search

Or

Press on Radio Media to display the

primary page.

Select "FM Radio".

Press 3 or 4 to move the cursor for an

automatic search down or up for a radio

frequency.

Press on the secondary page.

Or

"AM Radio".

Select "Radio list" in the secondary

page.

THEN

Select change source.

Radio reception may be affected by

the use of electrical equipment not

approved by CITROËN, such as a USB

charger connected to the 12 V socket.

The exterior environment (hills,

buildings, tunnel, car park, below

ground...) may prevent reception,

even in RDS station tracking mode.

This phenomenon is normal in the

propagation of radio waves and is in no

way indicative of a fault with the audio

system.

Select a radio station from

the list offered.

Select "FM Radio".

Select "Update list" to refresh the

list.

Or

"AM Radio".

To select a preset radio station.

Press on Radio Media to display the

primary page.

278

Audio and Telematics

Presetting a station

Activating / Deactivating RDS

OR

Select a radio station or frequency (refer to the

Press on Radio Media to display the

corresponding section).

primary page.

Press on Radio Media to display the

primary page.

Press on "Save" (preset).

Press on the secondary page.

Select "Settings".

Select a number in the list to preset the

previously chosen radio station.

A long press on a number saves (presets) the

station.

Press on Frequency.

Select "Radio".

THEN

Activate/deactivate "RDS

options".

Or

Enter the frequency in full (e.g.:

92.10 MHz) using the keypad then

"Confirm".

A press on this button presets all of

the stations one after the other.

RDS, if activated, allows you to continue

listening to the same station by automatic

retuning to alternative frequencies.

However, in certain conditions, coverage

of an RDS station may not be assured

throughout the entire country as radio

stations do not cover 100 % of the

Recalling preset stations

Press on Radio Media to display the

primary page.

Changing radio station

Pressing the name of the current radio station

brings up a list.

Select "Save" (preset).

territory. This explains the loss of

To change radio station press the name of the

desired station.

reception of the station during a journey.

.

279

Audio and Telematics

DAB (Digital Audio Broadcasting) radio

Short-cut: access to the choice of audio

Display of the name of the

current station.

source and the list of stations (or titles,

depending on the source).

Select the radio station.

Any thumbnail broadcast by

the station.

Select the audio source.

Display the "DAB" band.

Display of "Radiotext" for

the current station.

Secondary page.

Next "Multiplex".

Next radio station.

Previous "Multiplex".

Previous radio station.

Preset stations,

buttons 1 to 15.

Short press: select the

preset radio station.

Long press: preset a radio

station.

Display the name and

number of the "multiplex"

service being used.

Display of options:

if active but not available, the display will be greyed out,

if active and available, the display will be blank.

If the "DAB" radio station being listened to is not

available on "FM", the "DAB FM" option is greyed out.

Journaline^®is a text-based information service designed for digital radio systems.

It provides text-based information structured around topics and sub-topics.

This service is available from the "LIST OF DAB STATIONS" page.

280

Audio and Telematics

Digital radio

DAB / FM auto tracking

Digital radio provides higher quality

"DAB" does not cover 100% of the

territory.

If "DAB/FM station tracking" is

reception and also the graphical display

of current information on the radio

station being listened to. Select "List" in

the primary page.

The range of multiplexes available is

displayed in alphabetical order.

activated, there is a difference of a few

seconds when the system switches to

"FM" analogue radio with sometimes a

variation in volume.

When the digital signal is restored, the

system automatically changes back to

"DAB".

When the digital radio signal is poor,

"DAB/FM station tracking" allows you to

continue listening to the same station,

by automatically switching to the

corresponding "FM" analogue station

(if there is one).

Press on Radio Media to display the

primary page.

Press on Radio Media to display the

primary page.

If the "DAB" station being listened to

is not available on "FM" ("DAB/FM"

option greyed out), or "DAB/FM station

tracking" is not activated, the sound

will cut out while the digital signal is too

weak.

Select change of source.

Select "DAB Radio".

Press on the secondary page.

Select "Settings".

Select "List" in the primary page.

Select "Radio".

or

Select "Radio list" in the secondary

page.

Select "Digital/FM auto

tracking" then "Confirm".

Select the radio station from the list offered.

.

281

Audio and Telematics

Media

USB player

Auxiliary socket (AUX)

Selection of source

Press on Radio Media to display the

primary page.

Select change of source.

Insert the USB memory stick into the USB port

or connect the USB device to the USB port

using a suitable cable (not supplied).

This source is only available if the "Auxiliary

socket" option has been activated in the

"Media" settings.

Connect the portable device (MP3 player…) to

the auxiliary Jack socket using an audio cable

(not supplied).

To protect the system, do not use a

USB hub.

Choose the source.

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or on connection of a

USB memory stick. The lists are memorised: if

they are not modified, the subsequent loading

time will be shorter.

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your

audio system.

Display and management of the controls are

via the portable device.

Information and advice

The audio system will only play audio files

with ".wma, .aac, .flac, .ogg and .mp3" file

extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 32, 44 and

48 KHz.

282

Audio and Telematics

Bluetooth^®audio streaming Connecting Apple^®players

Streaming allows audio files on your telephone

It is advisable to restrict file names to

20 characters, without using special characters

(e.g. " " ? ; ù) to avoid any playing and

displaying problems.

to be played through the vehicle's speakers.

Connect the telephone: see the "Telephone"

section, then "Bluetooth".

Choose the "Audio" or "All" profile.

The system supports USB mass

storage portable players, BlackBerry^®

devices or Apple^®players via USB

ports. The adaptor cable is not

supplied.

If play does not start automatically, it may be

Connect the Apple^®player to the USB port

necessary to start the audio playback from the

using a suitable cable (not supplied).

Control of the peripheral device is with

the audio system controls.

telephone.

Play starts automatically.

Control is from the peripheral device or by

Control is via the audio system.

Other peripheral devices, not

recognised by the system on

connection, must be connected to the

auxiliary socket using a Jack cable (not

supplied).

using the audio system buttons.

The classifications available are those

of the portable device connected

(artists / albums / genres / playlists /

audiobooks / podcasts).

The default classification used is by

artist. To modify the classification used,

return to the first level of the menu

then select the desired classification

(playlists for example) and confirm

to go down through the menu to the

desired track.

Once connected in streaming mode,

the telephone is considered to be a

media source.

It is recommended that you activate

"Repeat" on the Bluetooth^®peripheral.

Use only USB memory sticks formatted FAT32

(file allocation table).

To protect the system, do not use a

USB hub.

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

It is recommended that the USB cable

for the portable device is used.

.

283

Audio and Telematics

Settings

Level 1

Level 2

Audio settings

284

Audio and Telematics

Level 1

Level 2

Comments

Ambience

Balance

Choose the sound ambience.

Sound distribution using the Arkamys^®system.

Set the volume or activate the link to vehicle

speed.

Sound effects

Ringtones

Voice

Settings

Audio settings

Set the telephone ringtone and volume.

Set the volume and voice for speaking street

names.

Confirm

Save your settings.

Settings

Function that turns off the display.

Pressing the screen reactivates it.

Turn off screen

.

285

Audio and Telematics

Level 1

Level 2

Factory settings

Adjust date and time

Configuration

Display screen

286

Audio and Telematics

Level 1

Level 2

Comments

Select the desired data in the list then press

Delete.

Delete data

Factory settings

Confirm

Settings

Secondary page

System Settings

Return to factory settings.

Save the settings.

Settings

Secondary page

Time/Date

Confirm

Set the date and time then confirm.

Activate automatic text scrolling

Activate animations

Confirm

Settings

Secondary page

Screen settings

Activate or deactivate the setting then confirm.

.

287

Audio and Telematics

Level 1

Level 2

Configuration

Calculator

Calendar

288

Audio and Telematics

Level 1

Level 2

Comments

Settings

Secondary page

Calculator

Select the calculator.

Settings

Secondary page

Calendar

Select the calendar.

.

289

Audio and Telematics

Audio settings

Press on Settings to display the

primary page.

On-board audio: Arkamys^©Sound

Staging optimises sound distribution in

the passenger compartment.

The distribution (or spatialisation using

the Arkamys^®system) of sound is an

audio process that allows the audio

quality to be adapted to the number of

passengers in the vehicle.

Select "Audio settings".

Available only with the 6-speaker

configuration.

Select "Ambience"

"Balance"

The audio settings (Ambience, Bass:,

Treble: and Loudness) are different

and independent for each sound

source.

Or

The settings for Distribution and

Balance are common to all sources.

"Sound effects"

"Ringtones"

-

"Ambience" (choice of 6 musical

ambiences)

-

"Bass:"

"Treble:"

"Loudness" (Activate/Deactivate)

"Distribution" ("Driver", "All

passengers", "Front only")

"Audible response from touch

screen"

Or

"Voice".

-

"Volume linked to speed"

(Activate/Deactivate)

290

Audio and Telematics

Modifying system settings

Press on Settings to display the

Press on "Settings" to display the

primary page.

Press on the secondary page.

Press on the secondary page

Select "System Settings".

Select "Screen settings".

Select "Time/Date" to change the

time zone, the synchronisation with

GPS, the time and its format, then

the date.

Activate or deactivate "Activate

automatic text scrolling" and

"Activate animations".

Select "Delete data" to delete the

list of recent destinations, personal

points of interest, contacts in the list.

Select "Calculator" to display a

calculator.

Select "Calendar" to display a

calendar.

Choose the item then select "Delete".

Select "Factory settings" to return

to the original settings.

.

291

Audio and Telematics

Connected services

MirrorLink^TM

Optional depending on the

smartphone and operating system.

292

Audio and Telematics

MirrorLink^TMsmartphone

connection

Start the application on the

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

smartphone (optional, depending

on the smartphone and operating

system).

As a safety measure and because it

requires sustained attention by the

driver, using a smartphone when

driving is prohibited.

During the procedure, several screen

pages relating to certain functions

are displayed.

Please note:

All operations must be done with the

vehicle stationary.

Accept to start and end the

connection.

-

if your smartphone is supported, to

make it "MirrorLink^TM" compatible,

some phone manufacturers

nevertheless invite you to first

download a dedicated application.

Once connection is established, an page

is displayed with the applications already

downloaded to your smartphone and adapted

to MirrorLink^TMtechnology.

If only one application has been downloaded to

the smartphone, it starts automatically.

The synchronisation of a

smartphone allows applications on a

smartphone that are adapted to the

MirrorLink^TMtechnology to be displayed

in the vehicle's screen.

The principles and standards

are constantly evolving. For the

communication process between the

smartphone and the system to work

correctly, the smartphone must be

unlocked; update the operating system

of your smartphone as well as the date

and time in the smartphone and the

system.

When connecting a smartphone to

the system, it is recommended that

Bluetooth^®be started on the smartphone

Access to the different audio sources remains

accessible in the margin of the MirrorLink^TM

display, using touch buttons in the upper bar.

Access to the menus for the system is possible

at any time using the dedicated buttons

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

From the system, press on

"Connected services" to display the

primary page.

Voice recognition

Press the end of the lighting control stalk to

start voice recognition of your smartphone via

the system.

Voice recognition requires a compatible

smartphone connected to the vehicle by

Bluetooth^®.

For the list of eligible smartphones,

connect to the brand's internet website

in your country.

Press on "MirrorLink^TM" to

start the application in the

system.

.

293

Audio and Telematics

Level 1

Level 2

Level 3

294

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Access or return to the applications already

downloaded to your smartphone and adapted to

MirrorLink^TMtechnology.

Access to a menu list depending on the

application chosen.

"Back": abandon the current operation, go up one

level.

Connected

services

MirrorLink^TM

"Home": access or return to the "Car mode" page.

Access to the "Connected services" primary

page.

.

295

Audio and Telematics

CarPlay^®

296

Audio and Telematics

CarPlay^®smartphone

connection

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

When the telephone menu is displayed,

As a safety measure and because it

requires sustained attention by the

driver, using a smartphone when

driving is prohibited.

All operations must be done with the

vehicle stationary.

connection of the USB cable causes the

display to automatically change to CarPlay

mode.

When another menu is displayed, on

connection of a USB cable a message is

displayed in the upper bar, indicating that

CarPlay mode has been activated.

Press Open to display CarPlay mode.

On connecting the USB cable, the

"Telephone" function changes to

"CarPlay" in the menu carousel.

Press on "CarPlay" to display the

CarPlay^®interface.

The synchronisation of a smartphone

allows applications on a smartphone

that are adapted to the CarPlay^®

technology to be displayed on the

vehicle's screen.

As the principles and standards are

constantly evolving, it is recommended

that you update the operating system of

your smartphone.

Or

Voice recognition

Connect the USB cable. The

smartphone is charged while

connected by the USB cable.

Press the end of the lighting control stalk to

start voice recognition of your smartphone via

the system.

From the system, press on

"Connected services" to display the

primary page.

For the list of eligible smartphones,

connect to the brand's internet website

in your country.

Press on "CarPlay" to display the

CarPlay^®interface.

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

During the procedure, one or more

screen pages relating to certain

functions are displayed on connection.

.

297

Audio and Telematics

Telephone

Level 1

Level 2

Call log

Level 3

Contacts

298

Audio and Telematics

Level 1

Level 2

All calls

Level 3

Comments

Incoming calls

Outgoing calls

Contacts

Telephone

Call log

After making choices, start the call.

View

Magnifying glass

Create

Call

Addresses

Create

Modify

Delete

View

Telephone

Contacts

Delete all

By name

Confirm

After making choices, start the call.

Navigate to

Search for contact

Call

.

299

Audio and Telematics

Level 1

Level 2

Level 3

Bluetooth (devices)

Devices detected

Telephone connection

Telephone Options

300

Audio and Telematics

Level 1

Level 2

Search

Level 3

Comments

Start the search for another peripheral device to

connect.

Telephone

connection

Start or stop the Bluetooth^®connection to the

selected peripheral device.

Connect / Disconnect

Update

Secondary page

Import the contacts from the selected telephone

to store them in the audio system.

Bluetooth

connection

Delete

Delete the selected telephone.

Save the settings.

Confirm

Telephone

connection

Telephone

Secondary page

Devices detected

Put on hold

Audio streaming

Start the search for peripheral devices.

Search

for devices

Internet

Cut the microphone temporarily so that the

contact cannot hear your conversation with a

passenger.

Import the contacts from the selected telephone

to save then in the audio system.

Telephone

connection

Update

Ringtones

Choose the telephone ringtone and volume.

Secondary page

Contact records used and free, percentage of

storage space used by internal contacts and

Bluetooth^®contacts.

Telephone Options

Memory info.

Confirm

Save the settings.

.

301

Audio and Telematics

Pairing a Bluetooth^®

telephone

Procedure from the system

For reasons of safety and because they

require prolonged attention on the part

of the driver, the operations for pairing

the Bluetooth^®mobile telephone to the

hands-free system of the audio system

must be carried out with the vehicle

stationary.

Activate the telephone's Bluetooth^®function

and ensure that it is "visible to all" (telephone

configuration).

Select the name of the

desired peripheral from the

list and "Confirm".

Press on Telephone to display the

primary page.

Enter a code of at least 4 figures for

the connection then "Confirm".

Procedure (short) from the

telephone

In the Bluetooth^®menu of your device, select

Press on the secondary page.

Enter this same code in the telephone then

accept the connection.

the system name in the list of devices detected.

Select "Bluetooth connection".

The system offers to connect the telephone:

-

in "Telephone" (hands-free kit, telephone

only),

Enter a code of at least 4 figures in the device

and confirm.

Select "Search for devices".

The list of telephones detected is

displayed.

in "Audio streaming" (streaming: wireless

playing of audio files from the telephone),

in "Internet" (internet browsing, only if your

telephone is compatible with the "DUN"

Dial-Up Networking Bluetooth^®standard).

Enter this same code in the system,

select "OK" and confirm.

Select one or more profiles and confirm.

If the telephone is not detected, it is

recommended that you switch the Bluetooth^®

function on your telephone off and then on again.

302

Audio and Telematics

Connecting a Bluetooth^®

peripheral device

Automatic reconnection

On switching on the ignition, the telephone

connected when the ignition was last switched

off is automatically reconnected, if this

connection mode had been activated during the

pairing procedure.

The services available depend

on the network, the SIM card and

the compatibility of the Bluetooth^®

telephone used. Check the telephone

manual and with your network provider

for details of the services available to

you.

Depending on the type of telephone,

the system will ask you to accept or not

the transfer of your contacts.

If not, select "Update".

The connection is confirmed by the display of a

message and the name of the telephone.

Manual connection

On return to the vehicle, if the last telephone

connected is present again, it is reconnected

automatically and within around 30 seconds

after switching on the ignition the pairing is

done without any action on your part, with

(Bluetooth^®activated).

The ability of the system to connect

with only one profile depends on the

telephone. The three profiles may all

connect by default.

Press on Telephone to display the

primary page.

Press on the secondary page.

Visit www.citroen.co.uk for more information

(compatibility, additional help, ...).

To modify the automatic connection mode,

select the telephone in the list then select the

desired profile.

Select "Bluetooth" to display the list

of paired peripherals.

The recognised telephone

appears in the list.

Select the peripheral to connect.

Press on "Search for devices".

Depending on your telephone, you may be

asked to accept automatic connection every

time the ignition is switched on.

The connection is confirmed by the display of a

message and the name of the telephone.

.

303

Audio and Telematics

Managing paired

telephones

Receiving a call

Making a call

An incoming call is announced by a ring and a

superimposed display in the screen.

Using the telephone is not

recommended while driving.

Park the vehicle.

Make the call using the steering

mounted controls.

This function allows the connection or

disconnection of a peripheral device as

well as the deletion of a pairing.

Make a short press on the steering

mounted TEL button to accept an

incoming call.

Press on Telephone to display the

primary page.

Make a long press

Calling a new number

Press on the secondary page.

Press on Telephone to display the

primary page.

on the steering mounted TEL button

to reject the call.

Select "Bluetooth" to display the list

of paired peripheral devices.

Enter the phone number using the

digital keypad.

Press "Call" to start the call.

Or

Select the peripheral in the list.

Select "End call".

Select "Search for devices"

Calling a contact

Press on Telephone to display the

primary page.

Or

"Connect / Disconnect" to start or

end the Bluetooth connection with

the selected device.

Or make a long press

Or

on the steering mounted TEL button.

"Delete" to delete the pairing.

304

Audio and Telematics

Managing contacts / entries

Select "Contacts".

Press on Telephone to display the

Select "By name" to view the list of

primary page.

contacts.

Select the desired contact from the list offered.

Select "Contacts".

Select "View".

Select "Call".

Calling a recently used number

Select "Create" to add a new contact,

observing the "international format".

Press on Telephone to display the

primary page.

Or

"Modify" to edit the selected contact.

Select "Call log".

Or

Select the desired contact from the list offered.

"Delete" to delete the selected

contact.

It is always possible to make a call

directly from the telephone; park the

vehicle first as a safety measure.

Or

"Delete all" to delete all information

for the selected contact.

.

305

Audio and Telematics

Frequently asked questions

The table below gives answers to the most frequently asked questions on your audio system.

Navigation

QUESTION

ANSWER

SOLUTION

The route calculation is not The navigation settings may conflict with the current location

Check the settings in the "Navigation" menu.

successful.

(exclusion of toll roads on a toll motorway).

The POIs have not been selected.

The POIs do not appear.

Select the POIs in the list of POIs.

The Hazard zone audible

warning does not work.

The audible warning is not active.

Activate audible warnings in the "Navigation"

menu.

The system does not

The guidance criteria do not take account of TMC messages.

Select the "Traffic info" function in the list of

suggest a detour around an

incident on the route.

guidance criteria.

I receive a Accident-prone Other than guidance, the system announces all Hazard zone

Zoom in on the map to view the exact position of

area alert which is not on

positioned in a cone located in front of the vehicle. It may provide an the Accident-prone area. Select "On the route" to

my route.

alert for a Hazard zone located on nearby or parallel roads.

no longer receive alerts other than guidance or to

reduce the time for the announcement.

306

Audio and Telematics

QUESTION

ANSWER

SOLUTION

Certain traffic jams along

On starting, it is several minutes before the system begins to receive Wait until the traffic information is being received

the route are not indicated the traffic information.

in real time.

correctly (display of the traffic information icons

on the map).

The filters are too restrictive.

Modify the "Geographic filter" settings.

In certain countries, only major routes (motorways...) are listed for

the traffic information.

This phenomenon is normal. The system is

dependent on the traffic information available.

The altitude is not

On starting, the initialisation of the GPS may take up to 3 minutes to Wait until the system has completed starting

displayed.

receive more than 4 satellites correctly.

up, so that there is GPS coverage of at least

4 satellites.

Depending on the geographical environment (tunnel...) or the

weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system

is dependent on the GPS signal reception

conditions.

.

307

Audio and Telematics

Radio

QUESTION

ANSWER

SOLUTION

The quality of reception of The vehicle is too far from the transmitter used by the station

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in

the geographical area.

the radio station listened

to gradually deteriorates

or the stored stations do

not function (no sound,

87.5 Mhz is displayed...).

listened to or there is no transmitter in the geographical area

through which the vehicle is travelling.

The environment (hills, buildings, tunnels, basement car parks...)

block reception, including in RDS mode.

This phenomenon is normal and does not indicate

a fault with the audio system.

The aerial is absent or has been damaged (for example when going Have the aerial checked by a CITROËN dealer.

through a car wash or into an underground car park).

I cannot find some radio

stations in the list of

stations received.

The station is not received or its name has changed in the list.

Press and hold the "List" button at the steering

mounted controls to update the list of stations

received or press the "Update list" function in the

system.

Some radio stations send other information in place of their name

(the title of the song for example).

The system interprets this information as the name of the station.

The name of the radio

station changes.

308

Audio and Telematics

Media

QUESTION

ANSWER

SOLUTION

Playback of my USB

memory stick starts only

after a very long wait

(around 2 to 3 minutes).

Some files supplied with the memory stick may greatly slow down

access to reading the memory stick (multiplication by 10 of the

catalogue time).

Delete the files supplied with the memory stick

and limit the number of sub-folders in the file

structure on the memory stick.

When I connect my iPhone When the iPhone connects automatically as a telephone, it forces

as telephone and to the the streaming function. The streaming function takes the place of

Disconnect and reconnect to the USB port

(the USB function takes priority over streaming).

USB port at the same time, the USB function which is then not useable, there is a period without

I am unable to play the

music files.

sound of the track being played with Apple^®players.

Some characters in the

media information are not

displayed correctly while

playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and

folders.

Playing of streaming files

does not start.

The peripheral device connected does not support automatic play.

Start the playback from the device.

The names of tracks and

the track length are not

displayed on the screen

when streaming audio.

The Bluetooth^®profile does not allow the transfer of this information.

.

309

Audio and Telematics

Settings

QUESTION

ANSWER

SOLUTION

In changing the setting

of treble and bass the

equalizer setting is

deselected.

The selection of an equalizer setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain

the desired musical ambience.

In changing the equalizer

setting, treble and bass

return to zero.

When changing the

balance settings, the

distribution setting is

deselected.

The selection of a distribution setting imposes the balance settings. Modify the balance or distribution settings to

Modifying one without the other is not possible. obtain the desired musical ambience.

When changing a sound

distribution setting,

the balance setting is

deselected.

310

Audio and Telematics

QUESTION

ANSWER

SOLUTION

There is a difference in

sound quality between the Treble, Equalizer and Loudness can be adapted to the different

different audio sources.

For optimum sound quality, the audio settings for Volume, Bass,

Check that the audio settings for (Volume, Bass,

Treble, Equalizer, Loudness) are adapted to the

sources listened to. It is advisable to set the

audio functions (Bass, Treble, Fr-Re balance,

Le-Ri balance) to the middle position, select the

"Linear", musical ambience and set the loudness

correction to the "Inactive" position in radio mode.

sound sources, which may result in audible differences when

changing source.

With the engine off, the

When the engine is switched off, the system's operating time

Start the vehicle's engine to increase the battery

charge.

system switches off after a depends on the state of charge of the battery.

few minutes of use. The switch-off is normal: the system switches to economy mode and

switches off to prevent discharging of the vehicle's battery.

.

311

Audio and Telematics

Telephone

QUESTION

ANSWER

SOLUTION

I cannot connect my

Bluetooth^®telephone.

The telephone's Bluetooth^®function may be switched off or the

telephone may not be visible.

-

Check that your telephone's Bluetooth^®

function is switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth^®telephone is not compatible with the system.

You can check the compatibility of your telephone

at www.citroen.co.uk (services).

The volume of the

telephone connected

in Bluetooth^®mode is

inaudible.

The volume depends both on the system and on the telephone.

Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

The ambient noise level has an influence on the quality of telephone Reduce the ambient noise level (close the

communication.

windows, reduce the booster fan speed, slow

down, ...).

Some contacts are

duplicated in the list.

The options for synchronizing contacts are synchronizing the

contacts on the SIM card, the contacts on the telephone, or both.

When both synchronizations are selected, some contacts may be

duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

Contacts are not shown in Some telephones offer display options. Depending on the settings

alphabetical order. chosen, contacts can be transferred in a specific order.

Modify the display setting in the telephone

directory.

The system does not receive The Bluetooth^®mode does not permit sending SMS text messages

SMS text messages. to the system.

312

Audio and Telematics -> 7-inch touch screen tablet for Your Citroen C5 Suv Second Generation (2008-2017)

Related Topics

Audio and Telematics

Popular Owner Manuals

Latest Owner Manuals