Ease of use and comfort
Rear seats
Bench seat, the left-hand (2/3) or right-hand (1/3) section of which can be folded to adapt the boot load space.
Rear head restraints
Folding the seat
The rear head restraints can be removed and
have two positions:
In order to fold a rear seat without any risk of
damage, always start with the seat cushion,
never with the seat backrest:
F
F
Pull the control 2 forward to release the
seat backrest 3.
Fold the seat backrest 3 fully down.
-
-
high, position for use,
low, storage position.
To raise a head restraint, pull it upwards.
To lower it, press the lug then the head
restraint.
To remove it, place it in the high position, push
the lug and pull it upwards.
F
Move the corresponding front seat forward
if necessary.
Raise the front of the seat cushion 1.
Tilt the seat cushion 1 fully against the front
seat.
The seat cushion 1 can be removed to
increase the load volume.
F
F
To refit it, engage the head restraint rods in the
holes taking care to remain in line with the seat
back.
F
F
Check that the seat belt is positioned
correctly on the side of the seat backrest.
Lower or remove the head restraints if
necessary.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.
68
English 