Get Instruments Guide for Citroen C5 Suv Second Generation (2008-2017)

Instruments

Instrument panels - petrol and Diesel

Panel grouping together the dials and vehicle operation indicator and warning lamps.

● Permanently:

A. Fuel gauge

B. Indicator:

F. Controls:

● Lighting dimmer

-

Trip mileage recorder

Total mileage recorder

● Coolant temperature

● Reset the trip mileage recorder and

● Temporarily:

● Cruise control/Speed limiter information

service indicator

-

Service indicator.

Engine oil level indicator.

Alert messages.

C. Analogue speedometer

D. Rev counter

E. Indicator:

G. Instrument panel screen indicating:

● Depending on the page selected with the

left-hand thumb wheel on the steering

wheel:

● Engine oil temperature

● Gear efficiency.

● Gear selector position and gear engaged

(automatic gearbox).

-

Digital speed repeater

Trip computer

Navigation (guidance) information

Display of message alerts

Engine oil level indicator

Service indicator

14

Instruments

1

Main menu

The main menu allows you to programme

certain vehicle functions* and the instrument

panel screen:

"Vehicle parameters" menu*

This allows you to access the settings for

certain functions, grouped by category:

-

Access to the vehicle.

Lighting.

Driving assistance.

"Choice of language" menu

This allows you to choose the display and voice

recognition language.

"Choice of units" menu

This allows you to choose metric or imperial

units.

The instrument screen A is located in the

centre of the instrument panel.

-

With the vehicle stationary, you can access

the main menu of the screen by quickly

pressing on the left-hand thumb wheel B

on the steering wheel.

-

Whilst driving, the message "Action

impossible while driving" is displayed in

the instrument panel if you try to open the

main menu.

* Only with the Audio system.

15

Instruments

Driving assistance

Access to the vehicle

Lighting

With this menu selected, you can:

F

activate or deactivate the operation of the

rear wiper in reverse gear.

F

activate or deactivate the driver welcome

function.

F

activate or deactivate the operation of the

daytime running lamps**.

activate or deactivate the guide-me-home

lighting and set its period of operation.

activate or deactivate the directional

headlamps.

For more information on Ease of use and

comfort, refer to the corresponding section.

F

select the unlocking of all doors or just the

driver's door.

For more information on the

Wiper control stalk, refer to the

corresponding section.

For more information on Access, refer to the

corresponding section.

F

activate or deactivate the automatic

operation of the electric parking brake**.

For more information on the Lighting

control stalk (in particular on the

daytime running lamps and automatic

guide-me-home lighting) or the

Directional lighting, refer to the

corresponding section.

For more information on Driving, refer to the

corresponding section.

** Depending on the country of sale.

16

Instruments

Trip computer

1

System that gives you information on the current journey (range, fuel consumption…).

In the instrument panel screen

Information displays

F

Turn the left-hand thumb wheel A on the

steering wheel to display the various trip

computer tabs in succession:

-

The current information tab is displayed in

zone B of the instrument panel screen, with:

● the range,

● the current fuel consumption,

● the digital speed reading or the Stop &

Start time counter.

Trip reset

F

When the trip required is displayed, press

the left-hand thumb wheel on the steering

wheel for more than two seconds.

-

The trip "1" tab is displayed in zone C of

the instrument panel screen, with:

● the distance travelled,

● the average fuel consumption,

● the average speed,

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures and trip "2" for monthly figures.

for the first trip.

The trip "2" tab is displayed in zone C of

the instrument panel screen, with:

● the distance travelled,

● the average fuel consumption,

● the average speed,

for the second trip.

17

Instruments

In the touch screen tablet

-

The current information tab with:

● the range,

● the current fuel consumption,

● the Stop & Start time counter.

-

The trip "1" tab with:

● the average fuel consumption,

● the distance travelled,

● the average speed,

for the first trip.

Information display

Trip reset

F

When the desired trip is displayed, press

the reset button.

The trip "2" tab with:

F

Press the MENU button.

● the average fuel consumption,

● the distance travelled,

● the average speed,

for the second trip.

Trips "1" and "2" are independent but their use

is identical.

Select "Driving" to display the

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

various tabs.

F

Select the desired tab using your finger.

18

Instruments

1

A few definitions…

Range

(miles or km)

Current fuel

consumption

Average speed

(mph or km/h)

The distance which can still be

(mpg or l/100 km or km/l)

Calculated since the last trip

travelled with the fuel remaining

in the tank (at the average fuel

consumption seen over the last

few miles (kilometres) travelled).

Calculated over the last few seconds.

computer reset.

This function is only displayed from

20 mph (30 km/h).

Distance travelled

(miles or km)

Calculated since the last trip

computer reset.

This value may vary following a change

in the style of driving or the relief,

resulting in a significant change in the

current fuel consumption.

Average fuel consumption

(mpg or l/100 km or km/l)

Calculated since the last trip

computer reset.

When the range falls below 20 miles (30 km),

dashes are displayed.

Stop & Start time

counter

(minutes / seconds or hours /

minutes)

After filling with at least 5 litres of fuel, the

range is recalculated and is displayed if it

exceeds 60 miles (100 km).

If your vehicle is fitted with

Stop & Start, a time counter

calculates the time spent in

STOP mode during a journey.

It resets to zero every time the

ignition is switched on with

the key.

If dashes are displayed continuously

while driving in place of the digits,

contact a CITROËN dealer or a

qualified workshop.

19

Instruments

Return to the main

instrument panel screen

display

Display of navigation

information in the

instrument panel screen

Check function

Successive rotations of the left-hand thumb

wheel on the steering wheel allow you to return

to the main instrument panel screen display

(vehicle speed), via the navigation information

screen, then the screen displaying only the

total mileage and the trip mileage (bottom of

screen).

You can display navigation information in

the instrument panel screen by rotating the

left-hand thumb wheel on the steering wheel.

This function allows you to check certain

indicators and display the log of alerts.

F

Press on button A.

The following information appears in turn in the

instrument panel screen:

-

Repeat of the service indicator.

Repeat of the range indicator for the

AdBlue^®and the SCR system for BlueHDi

Diesel versions.

-

Repeat of the engine oil level indicator.

Any alert messages.

20

Instruments

Indicators

1

Engine oil temperature

gauge

Coolant temperature

gauge

Fuel gauge

Under normal operating conditions, the bars

should be within section 1.

In severe operating conditions, the bars may

extend into section 2.

In this event, slow down, and if necessary,

stop the engine and check the levels (see the

corresponding section).

Under normal operating conditions, the bars

should be within section 1.

On horizontal ground, illumination of the fuel

low warning lamp indicates that you are at the

reserve level.

An alert message is displayed in the instrument

panel.

In severe operating conditions, the bars may

extend into section 2, the engine coolant

temperature warning lamp A and the STOP

warning lamp come on in the instrument panel.

Stop as soon as it is safe to do so. Switch off

the ignition. The cooling fan may continue to

operate for a certain time.

Contact a CITROËN dealer or a qualified

workshop.

If the SERVICE warning lamp comes on, check

the levels (see the corresponding section).

21

Instruments

Service indicator

System which informs the driver when the

next service is due, in accordance with the

manufacturer's service schedule.

The point at which the service is due is

calculated from the last service indicator reset

to zero, according to the mileage covered and

the time elapsed since the last service.

Between 600 miles (1 000 km) and 1 800 miles

(3 000 km) remain before the next service is due

Less than 600 miles (1 000 km)

remain before the next service is due

For a few seconds after the ignition is switched

on, the spanner symbolising the service

operations comes on and a message is

displayed in the instrument panel indicating

the distance or time remaining before the next

service is due.

Example: 1 900 miles (2 800 km) remain

before the next service is due.

When the ignition is switched on, the

instrument panel screen temporarily indicates:

For a few seconds after the ignition is switched

on, the spanner symbolising the service

operations flashes and a message is displayed

in the instrument panel indicating the distance or

time remaining before the next service is due.

Example: 500 miles (900 km) remain before the

next service is due.

When the ignition is switched on, the instrument

panel screen indicates for a few seconds:

For BlueHDi Diesel versions, depending

on the country of sale, the degree of

deterioration of the engine oil may also

be taken into account.

More than 1 700 miles (3 000 km)

remain before the next service

is due

When the ignition is switched on, no service

information appears in the instrument panel

screen.

A few seconds after the ignition is switched on,

the spanner goes off.

After the message disappears, the spanner

remains on alongside the mileage recorder as

a reminder that a service must be carried out

soon.

22

Instruments

1

Service overdue

Service indicator

zero reset

The spanner may come on if you have

exceeded the period since the last service,

as indicated in the manufacturer's service

schedule.

For a few seconds after the ignition is switched

on, the spanner flashes to indicate that

the service must be carried out as soon as

possible.

Example: the service is overdue by 300 miles.

When the ignition is switched on, the

instrument panel screen indicates:

For BlueHDi Diesel versions, the

spanner may also come on early,

according to the level of deterioration

of the engine oil, which depends on the

driving conditions in which the vehicle

is used.

After each service, the service indicator must

be reset to zero.

If you have carried out the service yourself:

The spanner remains on alongside the

mileage recorder to indicate that a service is

overdue.

F

switch off the ignition,

press and hold the trip distance recorder

zero reset button,

F

switch on the ignition; the distance recorder

display begins a countdown,

when the display indicates "=0", release

the button; the spanner disappears.

Following this operation, if you wish to

disconnect the battery, lock the vehicle and

wait at least five minutes for the zero reset to

be taken into account.

For BlueHDi Diesel versions, the

Service warning lamp also comes on

when the ignition is switched on.

23

Instruments

Engine oil level indicator

The engine oil level is displayed in the

instrument panel screen for a few seconds

when the ignition is switched on, after the

servicing information.

Oil level correct

Oil level indicator fault

This is signalled by the display of the message

"Oil level measurement invalid" in the

instrument panel screen.

Oil level incorrect

Contact a CITROËN dealer or a qualified

workshop.

The level read will only be correct if

the vehicle is on level ground and the

engine has been off for more than

30 minutes.

This is indicated by the display of the message

"Oil level incorrect" in the instrument panel

screen, accompanied by the service warning

lamp and an audible signal.

In the event of a fault with the electric

indicator, the oil level is no longer

monitored.

If the system is faulty, you must check

the engine oil level using the manual

dipstick located under the bonnet.

For more information on Checking

levels, refer to the corresponding

section.

If the low oil level is confirmed by a

check using the dipstick, the level must

be topped-up to avoid damage to the

engine.

For more information on Checking

levels, refer to the corresponding

section.

24

Instruments

1

Distance recorders

Lighting dimmer

System for manual adjustment of the

brightness of the instruments and controls in

relation to the exterior brightness.

The total and trip distances are displayed for

thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

Total distance recorder

Operation

When travelling abroad, you may

have to change the units of distance:

the display of road speed must be in

the official units (miles or km) for the

country.

The change of units is done via the

screen configuration menu, with the

vehicle stationary.

It measures the total distance travelled by the

vehicle since its first registration.

Trip distance recorder

F

Press button A to decrease the brightness

of the instruments and controls.

Press button B to increase the brightness

of the instruments and controls.

Deactivation

It measures the distance travelled since it was

reset by the driver.

Resetting the trip recorder

When the lighting is off, or in day mode on

vehicles fitted with daytime running lamps,

pressing the buttons does not have any effect.

F

With the ignition on, press the button until

zeros appear.

25

Instruments

Warning and indicator lamps

Visual indicators which inform the driver of the occurrence of a malfunction or fault (warning lamp)

or of the operation of a system (operation or deactivation indicator lamp).

Warning lamps

When the engine is running or the vehicle is

being driven, the illumination of one of the

following warning lamps indicates a malfunction

or fault which requires action on the part of

the driver.

The illumination of a warning lamp is always

accompanied by the display of an additional

message, to assist you in identifying the fault.

If you encounter any problems, contact a

CITROËN dealer or a qualified workshop.

When the ignition is switched on

Certain warning lamps come on for a few

seconds when the ignition is switched on.

When the engine is started, these warning

lamps should go off.

Associated warnings

The illumination, fixed or flashing, of certain

warning lamps may be accompanied by an

audible signal and a message in the screen.

If they remain on, before moving off, refer to the

information for the warning lamp concerned.

26

Instruments

Warning/indicator lamp

STOP

is on

Cause

Action / Observations

1

fixed, associated with

The illumination of this warning lamp

Stop as soon as it is safe to do so.

another warning lamp. is associated with a serious fault with Park, switch off the ignition and call a CITROËN

the braking system, power steering,

automatic gearbox, engine oil

pressure, engine coolant temperature

or a major electrical fault.

dealer or a qualified workshop.

Service

temporarily,

accompanied by a

message.

One or more minor faults for which

there is no specific warning lamp

have been detected.

Identify the cause of the fault using the message

displayed in the screen.

You can deal with some problems yourself, such as a

door open or the start of saturation of the particle filter

(as soon as the traffic conditions allow, regenerate

the filter by driving at a speed of at least 40 mph

(60 km/h), until the warning lamp goes off).

For any other problems, such as a fault with the tyre

under inflation detection system, contact a CITROËN

dealer or a qualified workshop.

fixed, accompanied by One or more major faults for which

Identify the cause of the fault using the message

displayed in the screen; you must then contact a

CITROËN dealer or a qualified workshop.

a message.

there is no specific warning lamp

have been detected.

fixed, associated with the The servicing interval has been

Only on BlueHDi Diesel versions.

flashing and then fixed

display of the service

indicator spanner.

exceeded.

Your vehicle must be serviced as soon as possible.

27

Instruments

Warning/indicator lamp

Braking

is on

Cause

Action / Observations

fixed, associated with

the STOP warning

lamp.

The braking system fluid level is too

low.

You must stop as soon as it is safe to do so.

Top up with brake fluid recommended by CITROËN.

If the problem persists, have the system checked by a

CITROËN dealer or a qualified workshop.

+

fixed, associated with

the STOP and ABS

warning lamps.

The electronic brake force distribution You must stop as soon as it is safe to do so.

(EBFD) system has a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

Anti-lock

Braking System

(ABS)

fixed.

The anti-lock braking system has a

fault.

The vehicle retains conventional braking.

Drive carefully at reduced speed and contact a

CITROËN dealer or a qualified workshop without

delay.

Electric parking

brake

flashing.

The electric parking brake is not

applied automatically.

The application/release is faulty.

You must stop as soon as it is safe to do so.

Park on flat level ground, engage a gear (or place the

lever in position P for an automatic gearbox), switch

off the ignition and contact a CITROËN dealer or a

qualified workshop.

Electric parking

brake fault

fixed.

The electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop

without delay.

For more information on the Electric parking brake,

refer to the corresponding section.

28

Instruments

Warning/indicator lamp

is on

Cause

Action / Observations

1

Deactivation of

the automatic

functions of the

electric parking

brake

fixed.

The "automatic application" (on

switching off the engine) and

"automatic release" functions are

deactivated or faulty.

Activate the function (depending on the country of

sale) via the vehicle parameters menu or contact a

CITROËN dealer or a qualified workshop if automatic

application / release is no longer possible.

For more information on the Electric parking brake,

refer to the corresponding section.

Dynamic

stability control

(DSC/ASR)

flashing.

fixed.

The DSC/ASR regulation is

operating.

The system optimises traction and improves the

directional stability of the vehicle in the event of loss of

grip or trajectory.

The DSC/ASR system has a fault.

Have the system checked by a CITROËN dealer or a

qualified workshop.

Brake pad wear

fixed, accompanied

by an audible signal

and a message in the

display screen.

The brake pads are at an advanced

state of wear.

Have the brake pads replaced by a CITROËN dealer

or a qualified workshop.

Under-inflation

fixed.

The pressure in one or more wheels

is too low.

Check the pressure of the tyres as soon as possible.

This check should preferably be carried out when the

tyres are cold.

+

flashing then fixed,

accompanied by the

Service warning lamp. on one of the wheels.

The tyre pressure monitoring system

has a fault or no sensor is detected

Under-inflation detection is not assured.

Have the system checked by a CITROËN dealer or a

qualified workshop.

29

Instruments

Warning/indicator lamp

is on

Cause

Action / Observations

Maximum

coolant

temperature

fixed.

The temperature of the cooling

system is too high.

Stop as soon as it is safe to do so.

Wait until the engine has cooled down before topping-

up the level, if necessary.

If the problem persists, contact a CITROËN dealer or

qualified workshop.

Battery charge*

fixed.

The battery charging circuit has a

fault (dirty or loose terminals, slack or started.

cut alternator belt, ...).

The warning lamp should go off when the engine is

If it does not go off, contact a CITROËN dealer or a

qualified workshop.

Seat belt not

fastened /

unfastened

The driver and/or the front/ rear

passenger has not fastened or has

unfastened their seat belt.

Pull the strap then insert the tongue in the buckle.

Seat belts

not fastened /

unfastened

fixed, associated

with the seat belt not

fastened / unfastened

warning lampl.

The illuminated dots represent the not fastened /

unfastened passengers.

+

They come on:

-

fixed for 30 about seconds on starting the vehicle,

fixed from 0 to 12 mph (0 to 20 km/h) when

driving,

-

flashing above 12 mph (20 km/h), accompanied by

an audible signal for about 120 seconds.

* Depending on the country of sale.

30

Instruments

Warning/indicator lamp

is on

Cause

Action / Observations

1

Low fuel

level

fixed.

When it first comes on there remains You must refuel as soon as possible to avoid running

approximately 5 litres of fuel in the out of fuel.

tank.

This warning lamp wil come on every time the ignition

is switched on, until a sufficient addition of fuel is

made.

Fuel tank capacity: 71 litres.

Never continue to drive until you run out of fuel, this

could damage the emission control and injection

systems.

Engine

autodiagnosis

system

fixed.

The emission control system has a

fault.

The warning lamp should go off when the engine is started.

If it does not go off, contact a CITROËN dealer or qualified

workshop without delay.

flashing.

The engine management system has Risk of destruction of the catalytic converter.

a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

31

Instruments

Warning/indicator lamp

AdBlue^®

is on

Cause

Action / Observations

fixed, on switching

The remaining driving range is

between 350 miles (600 km) and

1500 miles (2400 km).

Have the AdBlue^®tank topped-up as soon as

possible: go to a CITROËN dealer or a qualified

workshop, or carry out this operation yourself.

(BlueHDi Diesel) on the ignition,

accompanied by an

audible signal and a

message indicating the

remaining driving range.

flashing, accompanied The remaining driving range is

You must top-up the AdBlue^®tank to avoid a

breakdown: go to a CITROËN dealer or a qualified

workshop, or carry out this operation yourself.

by an audible signal

and a message

indicating the

remaining driving

range.

between 0 and 350 miles (600 km).

flashing, accompanied The AdBlue^®tank is empty: the

To be able to start the engine, you must top-up the

AdBlue^®tank: go to a CITROËN dealer or a qualified

workshop, or carry out this operation yourself.

It is essential to add at least 3.8 litres of AdBlue^®to

the fluid tank.

by an audible signal

and a message

starting inhibition system required

by legislation prevents starting of the

indicating that starting engine.

is prevented.

For topping-up the AdBlue^®fluid or for more information on AdBlue^®, refer to the corresponding section.

32

Instruments

Warning/indicator lamp

is on

Cause

Action / Observations

1

SCR emissions

control system

fixed, on switching

on the ignition,

A fault with the SCR emissions

control system has been detected.

This alert disappears once the exhaust emissions

return to normal levels.

+

(BlueHDi Diesel) associated with the

SERVICE and engine

diagnostic warning

lamps, accompanied

by an audible signal

and a message.

flashing, on switching

on the ignition,

After confirmation of the fault with the Contact a CITROËN dealer or a qualified workshop

emissions control system, you can

drive for up to 650 miles (1 100 km)

before the engine starting inhibition

system is triggered.

without delay, to avoid a breakdown.

associated with the

SERVICE and engine

diagnostic warning

lamps, accompanied by

an audible signal and

a message indicating

the remaining driving

range.

flashing, on switching

on the ignition,

You have exceeded the authorised

driving limit following confirmation

of a fault with the emissions control

system: the engine starting inhibition

system prevents starting of the

engine.

To be able to start the engine, you must call on a

CITROËN dealer or a qualified workshop.

associated with the

SERVICE and engine

diagnostic warning

lamps, accompanied

by an audible signal

and a message.

33

Instruments

Operation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.

It may be accompanied by an audible signal and a message in the screen.

Warning/indicator lamp

is on

Cause

Action / Observations

Left-hand

direction indicator

flashing with buzzer.

The lighting stalk has been pushed

down.

Right-hand

flashing with buzzer.

The lighting stalk has been pushed up.

direction indicator

Hazard warning

lamps

flashing with audible

signal.

The hazard warning lamps switch,

located on the dashboard, has been

operated.

The left-hand and right-hand direction indicators and

their associated indicator lamps flash simultaneously.

Sidelamps

fixed.

The lighting stalk is in the

"Sidelamps" position.

Dipped beam

headlamps

The lighting stalk is in the "Dipped

beam headlamps" position.

Main beam

headlamps

The lighting stalk has been pulled

towards you.

Pull the stalk to return to dipped beam headlamps.

Front foglamps

The front foglamps are switched on

using the ring on the lighting control

stalk.

Turn the ring on the lighting control stalk rearward

once to switch off the front foglamps.

Rear foglamps

fixed.

The rear foglamps have been

switched on using the ring on the

lighting control stalk.

Turn the ring on the lighting control stalk rearwards to

switch off the rear foglamps.

34

Instruments

Warning/indicator lamp

is on

Cause

Action / Observations

1

Diesel engine

pre-heating

fixed.

The ignition switch is at the

2nd position (ignition on).

Wait until the warning lamp has switched off before starting.

The duration for which the warning lamp is on is determined

by the climatic conditions.

Parking brake

fixed.

The parking brake is applied.

Release the parking brake to switch off the warning

lamp, keeping your foot on the brake pedal.

Observe the safety recommendations.

For further information on the Manual parking

brake or the Electric parking brake, refer to the

corresponding section.

flashing.

The parking brake is not fully applied

or is released.

Passenger's

front airbag

fixed.

The control switch, located in the

glove box, is in the "ON" position.

The passenger's front airbag is

activated.

In this case, do not install a rearward

facing child seat.

Turn the control switch to the "OFF" position to

deactivate the front passenger's airbag.

You can install a rearward facing child seat, unless

there is an airbag fault.

Stop & Start

When the vehicle stops (red lights,

The warning lamp goes off and the engine restarts

traffic jams, ...) the Stop & Start system automatically in START mode, as soon as you want to

has put the engine into STOP mode.

move off.

flashes for a few

seconds, then goes

off.

STOP mode is temporarily

unavailable,

or

For more information on Stop & Start, refer to the

corresponding section.

START mode is invoked

automatically.

35

Instruments

Deactivation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.

This is may be accompanied by an audible signal and a message in the multifunction screen.

Warning/indicator lamp

is on

Cause

Action / Observations

Passenger's

front airbag

fixed.

The control, located in the glove box, Set the control to the ON position to activate the

is set to the OFF position.

The passenger's front airbag is

deactivated.

passenger's front airbag.

In this case, do not fit a child seat in the rearward

facing position.

You can install a rearward facing

child seat, unless there is a fault with

the operation of the airbags.

36

Instruments

Monochrome screen C

1

Displays in the screen

Controls

Selection of the type of

information displayed (Mode)

Successive presses on the end of the

wiper stalk or on the MODE button of the

audio system permit selection of the type of

information presented in the multifunction

screen (date or audio system, CD, MP3).

Displays according to context:

-

time,

date,

exterior temperature with air conditioning

(the value displayed flashes if there is a

risk of ice),

-

parking sensor information,

audio functions,

alert messages.

For safety reasons, it is recommended

that the driver does not operate the

controls while the vehicle is in motion.

A. Access to the "Main Menu"

B. Cancel the operation or return to the

previous display

C. Scroll through the screen menus

Confirmation at the steering wheel

D. Confirmation at the audio system control

panel

37

Instruments

Main Menu

"Display

configuration" menu

Press on the button A to view the "Main Menu"

of the multifunction screen. This menu gives

you access to the following functions:

With this menu selected, you have access to

the following settings:

F

Press C to select the values you wish to

modify. Confirm your choice with a press

on C on the steering wheel or D on the

audio system.

-

audio functions,

display configuration,

telephone (Bluetooth^®hands-free kit).

-

brightness - video,

date and time,

choice of units.

Confirm with "OK" on the screen.

Adjusting the date and time

"Bluetooth - Telephone -

Audio" menu

"Audio functions"

menu

With the Audio system switched on, once

this menu is selected, you can configure

your Bluetooth^®hands-free kit (pairing), view

the different telephone directories (calls log,

services...) and manage your calls (start a call,

end a call, double call, secret mode...).

With the Audio system switched on, once

this menu is selected, you can activate or

deactivate functions associated with using the

radio (RDS, REG, RadioText), CD (introscan,

random play, CD repeat) or MP3 player (USB

port / auxiliary Jack socket).

F

Press on A.

Use C to select the "Date and time" menu,

then confirm your choice with a press on C

on the steering wheel or D on the audio

system.

Select the screen configuration using C.

Confirm with a press on C on the steering

wheel or D on the audio system

Select the date and the time settings,

using B. Confirm with a press on C on the

steering wheel or D on the audio system.

For more information on the Audio

system, refer to the corresponding

section.

For more information on the Audio

system (and in particular the "Audio

functions" application), refer to the

corresponding section.

F

For safety reasons, configuration of the

multifunction screen by the driver must

only be done when stationary.

38

Instruments

Touch screen tablet

1

This system gives access to:

General operation

Recommendations

It is necessary to press firmly, particularly for

"flick" gestures (scrolling through lists, moving

the map...). A light wipe is not enough.

The screen does not recognise pressing with

more than one finger.

-

menus for adjusting settings for vehicle

functions and systems,

Principles

Press the MENU button, then the virtual

buttons in the touch screen tablet.

Each menu is displayed over one or two pages

(primary page and secondary page).

-

audio and display settings menus,

audio system and telephone controls and

the display of associated information,

the display of the exterior temperature (a

blue snowflake appears if there is a risk

of ice),

-

Use this button to go to the

secondary page.

This technology allows use at all temperatures

and when wearing gloves.

the display of the trip computer.

Use this button to return to the

primary page.

And, depending on equipment, it also allows:

Do not use pointed objects on the touch

screen tablet.

Do not touch the touch screen tablet

with wet hands.

Uses a soft clean cloth to clean the

touch screen tablet.

-

the display of visual parking sensors

information,

After a few moments with no action on

the secondary page, the primary page

is displayed automatically.

-

access to the controls for the navigation

system and Internet services, and the

display of associated information.

Use this button for access to

additional information and to the

settings for certain functions.

For safety reasons, the driver must

only carry out operations that

require close attention with the

vehicle stationary.

Some functions are not accessible

when driving.

Use this button to confirm.

Use this button to quit.

39

Instruments

Menus

Press this button on the control

panel, then the menu button

concerned.

Navigation

Depending on trim level or country of

sale, navigation may be unavailable,

optional or standard.

For more information on Audio and

telematics, refer to the corresponding section.

Radio Media

For more information on Audio

and telematics, refer to the

corresponding section.

Telephone

1. Volume / mute.

For more information on Audio and

telematics, refer to the corresponding section.

Settings

Allows configuration of the display

and the system.

For more information on Audio

and telematics, refer to the

corresponding section.

Internet

Driving

The connected services are

Gives access to the trip computer.

accessible using the Bluetooth^®,

Wi-Fi or MirrorLink™ connections.

For more information on Audio and

telematics, refer to the corresponding section.

Depending on version, allows settings to be

adjusted for certain functions.

For more information on Driving, see the

corresponding section.

40

Instruments

1

"Driving" menu

The systems with settings that can be adjusted are detailed in the table below.

Button

Corresponding function

Vehicle settings

Comments

Access to other functions with settings that can be adjusted. The functions are grouped together under

three tabs:

-

"Driving assistance"

● "Parking sensors" (Audible and visual parking assistance).

For more information on the Parking sensors, refer to the corresponding section.

● "Automatic parking brake" (Automatic electric parking brake).

For more information on the Electric parking brake, refer to the corresponding section.

● "Automatic rear wiper in reverse" (Activation of rear wiper coupled to reverse gear).

For more information on the Wiper control stalk, refer to the corresponding section.

"Lighting"

● "Guide-me-home lighting" (Automatic guide-me-home lighting).

For more information on the Lighting control stalk, refer to the corresponding section.

● "Auto headlamp dip".

For more information on the Lighting control stalk, refer to the corresponding section.

● "LED daytime running lamps".

For more information on the Lighting control stalk, refer to the corresponding section.

"Vehicle access"

● "Driver plip action" (Selective unlocking of the driver's door).

For more information on the Remote control, refer to the corresponding section.

● "Driver welcome" (Welcome function).

For more information on the Front seats, refer to the corresponding section.

Select or deselect the tabs at the bottom of the screen to display the functions required.

41

Instruments

"Settings" menu

The functions accessible in this menu are given in the table below.

Button

Corresponding function

Audio settings

Comments

Adjustment of volume, balance...

Turn off screen

Time/Date

Turns off the display in the touch screen tablet (black screen).

Pressing the black screen (or the MENU button) restores the display.

Setting the date and time.

Screen settings

Calculator

Adjustment of the display settings (scrolling of text, animations...) and the screen brightness.

Display the calculator.

Display the calendar.

Calendar

42

Instruments

1

Setting the date and time

F

Select the "Settings" menu.

F

Select "Adjust time" or "Adjust date".

F

Modify the settings using the number

keypad, then confirm.

Press "Confirm" to save and quit.

In the secondary page, press on "Time/

Date".

When setting the time, you can select

"Satellite synchronisation", so that

the time is adjusted automatically by

satellite reception.

43

Instruments for Your Citroen C5 Suv Second Generation (2008-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals