Advertisement

Advertisement

Clutch, Gearbox, Transmission -> Checking the Oil Pressure in the AM6 Automatic Gearbox for Your Citroen C6 4 Door First Generation (2005-2012)

CHECKING THE OIL PRESSURE IN THE AM6 AUTOMATIC GEARBOX  
Tools.  
[1] Flexible pipe and pressure gauge  
[2] Flexible union  
: 4601- TF1 Toolkit 4601-T  
: (-).0336.X Toolkit 8010-T  
IMPERATIVE: Respect the safety and cleanliness requirements.  
B2CP45FC  
Preliminary operations.  
Remove the air filter housing.  
Move aside the pipe (1).  
Remove the screw (2).  
Screw in the tool [2] in place of the screw (2).  
B2CP45GC  
117  
CHECKING THE OIL PRESSURE IN THE AM6 AUTOMATIC GEARBOX  
WARNING: Clean the flexible pipe of the tool [1] each time before use; the different  
automatic gearbox oils cannot be intermixed.  
Fit the tool [1] on the tool [2].  
Perform the following operations:  
- Raise the vehicle, wheels hanging.  
- Apply the parking brake.  
- Start the engine.  
- Check the oil pressure.  
WARNING: Wait for the gearbox oil to reach a temperature between 58°C and 68°C.  
Check the level of oil in the gearbox (see corresponding operation).  
NOTE: Check the temperature of the oil using the diagnostic tool in parameter measures.  
Gear lever position  
Engine speed  
Principal oil pressure  
: D.  
: Idling.  
: 3.7 to 4.2 bars.  
B1BP3END  
118  
CHECKING THE OIL PRESSURE IN THE AM6 AUTOMATIC GEARBOX  
Checking the torque converter.  
WARNING: This check has to be of short duration (2 seconds), as it causes a rapid  
rise in the temperature of the oil in the automatic gearbox.  
Respect the following checking conditions:  
- Engine at operating temperature.  
- Gear lever in position D.  
- Press on the brake pedal.  
- Accelerate the engine to the maximum engine speed (see below).  
Gear lever position.  
Maximum engine speed for ES9A  
Maximum engine speed for DT17  
: D.  
: 2400 50 rpm.  
: 2600 50 rpm.  
Diagnosis:  
- If the maximum engine speed obtained is lower than the value indicated, the torque  
converter is the cause.  
- If the maximum engine speed obtained is higher than the value indicated, the automatic  
gearbox is the cause (slipping).  
Additional operations.  
Remove tools [1] and [2].  
Refit the screw (2), with a new seal.  
Reposition the pipe (1).  
Refit the air filter housing.  
B1BP3END  
119