2002-2014 Citroen C8 4 Door QUICK HELP -> Changing a Bulb User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

QUICK HELP -> Changing a Bulb for Your Citroen C8 4 Door Second Generation (2002-2014)

Changing a bulb  
1 - Dipped beam headlamps  
H7-55 W or xenon bulb.  
2 - Main beam headlamps  
H7-55 W or xenon bulb.  
3 - Fog lamps  
4 - Side lights  
W 5 W.  
CHANGING A BULB  
FRONT LIGHTS  
-
-
Turn the bulb holder a quarter of a  
turn to the left and remove it.  
Change the bulb.  
1. Dipped headlamps  
2. Main beam headlamps  
3. Fog lamps  
4. Side lights  
5. Direction indicators  
H1-55 W.  
-
Turn the protective cover  
corresponding to the faulty bulb  
a quarter of a turn to the left and  
remove it.  
WARNING: RISK OF  
ELECTROCUTION  
Xenon bulbs must be changed by a  
CITROËN dealer.  
Handle the bulbs with a dry cloth.  
-
-
Disconnect the connector.  
Press the end of the securing clip  
to free it. Change the bulb.  
Make access easier on the right-  
hand side by removing the wash-wipe  
pipe and the fuse box cover.  
High pressure washing: when using  
this type of washing on stubborn dirt,  
do not persist on the headlamps, the  
lights and their surrounds to avoid  
damaging their coating and their seal.  
When tting the new bulb, ensure that  
the direction notches are positioned  
correctly and the securing clip is xed  
properly.  
-
-
Reconnect the connector.  
Ret the protective cover, then turn  
it a quarter of a turn to the right.  
7
Changing a bulb  
5 - Direction indicators  
PY 21 W (amber).  
Direction indicator side repeaters  
WY 5 W (amber).  
Rear lights  
1. Direction indicators  
PY 21 W (amber).  
2. Side lights  
5 W.  
3. Brake/side lights  
P 21 W/5 W.  
-
-
Turn the bulb holder a quarter of a  
turn to the left and remove it.  
Change the bulb.  
-
Push the repeater rearwards and  
release it from the mirror.  
-
Hold the connector and turn the  
bulb holder a quarter of a turn to  
the left.  
The headlamps are tted with  
polycarbonate glass with a  
protective coating. Do not clean  
-
Turn the bulb a quarter of a turn to  
the left, remove it and change it.  
4. Reversing lights  
P 21 W.  
When retting, engage the repeater  
towards the rear and move it towards  
the front of the mirror.  
them with a dry or abrasive cloth, nor  
with a detergent or solvent product.  
Use a sponge and soapy water.  
In certain climatic conditions (low  
temperature, humidity), condensation  
inside the headlamp glass is normal;  
it disappears a few minutes after the  
lights are switched on.  
5. Fog lamps  
P 21 W.  
These 5 bulbs are changed from inside  
the vehicle:  
Amber coloured bulbs (direction  
indicators and side repeaters)  
must be changed for bulbs of  
identical specication and colour.  
-
-
open the tailgate,  
remove the air extraction grille on  
the side concerned,  
Changing a bulb  
NUMBER PLATE LIGHTS  
THIRD BRAKE LIGHT  
W 5 W.  
5 W 5 W bulbs.  
-
-
unscrew the two interior bolts B  
and C,  
unscrew the exterior bolt D,  
unscrew the bulb holder concerned  
a quarter of a turn to the left and  
remove it,  
-
-
Remove the lens.  
Change the faulty bulb.  
Remove the tailgate upper trim by  
unclipping it on each side.  
Squeeze the two tabs 1 to release  
-
-
-
the bulb holder.  
-
-
Change the faulty bulb.  
When retting, ensure that the  
tailgate upper trim has been put  
back in place correctly.  
-
unscrew the faulty bulb an eighth of  
a turn to the left and change it.  
When retting:  
-
take care to position the bulb  
correctly and press on it to engage it,  
When two or more bulbs are  
faulty, you must replace them  
immediately.  
-
take care to position the bulb holder  
correctly and screw it in a quarter of  
a turn to the right,  
-
take care to position and secure the  
light correctly.  
7

Related Topics

Popular Owner Manuals