Accesses
Switch on the ignition.
Press the locking padlock for at least five
seconds within the next ten seconds.
Switch off the ignition.
Wait at least one minute before using
the remote control.
The remote control is now working again.
ELECTRONIC IMMOBILISER
All of the keys contain an electronic
immobiliser device.
This device locks the engine supply system.
It is activated automatically when the key is
removed from the ignition.
There is a risk of damage if the replacement
battery does not conform.
KEY
This locks and unlocks the locks on the
vehicle and starts the engine.
Use only identical batteries or batteries of an
equivalent type to those recommended by
CITROËN dealers.
After the ignition is switched on, a dialogue
is established between the key and the
electronic immobiliser system.
REMOTE CONTROL
Changing the battery
Battery ref.: CR1620/3 volts.
Do not discard the remote control batteries,
they contain metals which are harmful to
the environment.
The metal part of the key must be unfolded
correctly for correct dialogue to take place.
Deposit them at a CITROËN dealership,
or at any other approved collection point.
The information "battery flat" is given by an
audible signal, accompanied by a message
on the display.
If you lose your keys
Programming the remote control
Visit a CITROËN dealer with the
vehicle’s V5 registration document and your
identification document.
Following changing of the remote control battery
or disconnection of the vehicle battery, the
remote control may have to be reprogrammed.
To replace the battery, unclip the casing
using a coin at the ring.
If the remote control does not work after the
battery has been changed, re-programme
the remote control.
A CITROËN dealer will be able to retrieve
the key code and the transponder code so
that a replacement key can be ordered.
Wait at least one minute before using the
remote control.
Insert the key in the ignition switch with the buttons
(padlocks) of the remote control facing you.
English 