Get In-Car Technology -> MyWay Guide for Citroen Dispatch Van Second Generation (2007-2015)

MyWay

MULTIMEDIAAUDIO EQUIPMENT/BLUETOOTH TELEPHONE

GPS EUROPE BY SD CARD

CONTENTS

ꢀ01 First steps

pg. 9.42

pg. 9.44

The MyWay is protected in such a way that it will only

operate in your vehicle. If it is to be installed in another

vehicle, contact a CITROËN dealer for conﬁguration of

the system.

ꢀ02 General operation

ꢀ03 Navigation - Guidance pg. 9.46

ꢀ04 Trafﬁc information

ꢀ05 Radio

ꢀ06 Music media players

ꢀ07 Bluetooth telephone

ꢀ08 Conﬁguration

pg. 9.53

pg. 9.54

pg. 9.55

pg. 9.58

pg. 9.60

pg. 9.61

pg. 9.63

For safety reasons, it is imperative that the driver carries

out operations which require prolonged attention while

the vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the MyWay switches off

following the activation of the Energy Economy mode.

ꢀ09 Trip computer

ꢀ10 Display ﬂow charts

ꢀ

Frequently asked questions pg. 9.82

9

01 FIRST

STEPS

MyWay CONTROL PANEL

1

11

3

4

8

5

6

2

13

16

12

7

9

10

14

15

1.

Engine not running

6.

7.

Access to the "Phone" Menu. Display the call list.

12. Selection of the previous/next radio station from the list.

Selection of the previous/next MP3 directory.

- Short press: on/off.

- Long press: CD pause, mute for the radio.

Engine running

- Short press: CD pause, mute for the radio.

- Long press: reinitialisation of the system.

Selection of the previous/next page of a list.

Access to the "MODE" Menu.

Selection of the successive display of:

Radio, Map, NAV (if navigation is in progress), Telephone (if a

conversation is in progress).

13. Selection of the previous/next radio station.

Selection of the previous/next CD or MP3 track.

Selection of the previous/next line of a list.

Long press: display of a black screen (DARK).

2.

3.

4.

Volume adjustment.

8.

9.

Access to the "Navigation" Menu. Display the last destinations.

14. Buttons 1 to 6:

Access to the "Radio" Menu. Display the list of stations.

Access to the "Music" Menu. Display the tracks.

Selection of the stored radio station.

Selection of the CD in the CD changer.

Long press: store the current radio station.

Access to the "Trafﬁc" Menu. Display the current trafﬁc alerts.

10. ESC: abandon the operation in progress.

11. CD eject.

3 - 4. Long press: access to the audio settings: front/rear and

left/right balance, bass/treble, equalizer, loudness, automatic

volume adjustment, initialise the settings.

15. SD card reader.

16. Dial for selection of the screen display and according to the

context of the menu.

Short press: conﬁrmation.

5.

Access to the "SETUP" Menu.

Long press: access to the GPS coverage and the

demonstration mode.

9.42

01

FIRST STEPS

STEERING WHEEL CONTROLS

RADIO: change to the next radio station on the list.

Long press: automatic search for a higher frequency.

CD/MP3 SD CARD/CD CHANGER: selection of the next track.

CD/MP3 SD CARD/CD CHANGER: continuous press: fast forward play.

RADIO: selection of the next stored station.

MP3/WMA SD CARD: selection of the next directory.

CD CHANGER: selection of the next CD.

Selection of the next entry in the address book.

Volume increase.

Mute: by pressing the volume

increase and decrease

buttons simultaneously.

- Change the sound source.

- Make a call from the address book.

- Pick up/Hang up the telephone.

- Press for more than 2 seconds: access to

the address book.

Restore the sound: by

pressing one of the two

volume buttons.

RADIO: selection of the previous stored station.

MP3/WMA SD CARD: selection of the previous directory.

CD CHANGER: selection of the previous CD.

Volume decrease.

Selection of the previous entry in the address book.

RADIO: change to the previous radio station on the List.

Long press: automatic search for a lower frequency.

CD/MP3 SD CARD/CD CHANGER: selection of the previous track.

CD/MP3 SD CARD/CD CHANGER: continuous press: fast backward play.

02

GENERAL OPERATION

Press the MODE button several times in succession to gain access to the following menus:

RADIO/MUSIC MEDIA PLAYERS

FULL SCREEN MAP

PHONE

(If a conversation is in progress)

NAVIGATION

(If navigation is in progress)

TRIP COMPUTER

SETUP:

system language, date and time, display,

TRAFFIC:

vehicle parameters, units and system parameters,

DEMONSTRATION MODE.

TMC information and messages

For maintenance of the display, the use of a soft, non-abrasive cloth

(spectacles cloth) is recommended, without any additional product.

For a detailed global view of the menus available, refer to section 10.

9.44

GENERAL OPERATION

02

DISPL

A

Y

A

CCORDING TO THE CONTEXT

TRIP COMPUTER:

RADIO:

A press on the OK dial to permits access

to short-cut menus according to the

display on the screen.

ALERT LOG

IN FM MODE

1

STATUS OF FUNCTIONS

TA

1

2

PHONE:

RDS

NAV:

END CALL

HOLD CALL

DIAL

RADIOTEXT

1

ABORT GUIDANCE

REPEAT ADVICE

BLOCK ROAD

ROUTE INFO

SHOW DEST.

REGIONAL PROG. (REG)

1

AM

DTMF TONES

PRIVATE MODE

MICRO OFF

IN AM MODE

1

TA

2

REFRESH AM LIST

FM

2

TRIP INFO

MUSIC MEDIA PLAYERS:

route type

TA

MAP:

ABORT/RESUME GUIDANCE

3

1

avoidance criteria

satellites

PLAY OPTIONS

NORMAL

1

SET DESTINATION

POIS NEARBY

2

ZOOM/SCROLL

VOICE ADVICE

ROUTE OPTIONS

RANDOM TRACK

REPEAT FOLDER

TRACK INTRO

SELECT MUSIC

2

POSITION INFO

MAP SETTINGS

ZOOM/SCROLL

1

03

NAVIGATION - GUIDANCE

Insert the SD card in the front panel reader and leave it there to use the Navigation functions.

The navigation SD card data must not be changed.

SELECTING A DESTINATION

The map data updates are available from CITROËN dealers.

1

4

Select the NEW DESTINATION

INPUT function and press the dial to

conﬁrm.

Press the NAV button.

NEW DESTINATION INPUT

5

Once the country has been selected,

turn the dial and select the town

function. Press the dial to conﬁrm.

The list of the last 20 destinations appears under the NAVIGATION

MENU function.

2

6

Press the NAV button again or select

the NAVIGATION MENU function and

press the dial to conﬁrm.

Select the letters of the town one by

one conﬁrming each time by pressing

the dial.

NAVIGATION MENU

3

Select the DESTINATION INPUT

A pre-set list (by entering the ﬁrst few letters) of the towns in the

country selected can be accessed via the LIST button on the virtual

keypad.

function and press the dial to conﬁrm.

DESTINATION INPUT

9.46

During guidance, pressing the end of the lights stalk repeats the last guidance instruction.

7

9

Then select START ROUTE

GUIDANCE and the press the dial to

conﬁrm.

Turn the dial and select OK.

Press the dial to conﬁrm.

START ROUTE GUIDANCE

10

Select the route type:

To speed up the process, the post code can be entered directly after

selecting the POST CODE function.

Use the virtual keypad to enter the letters and digits.

FAST ROUTE, SHORT ROUTE or

OPTIMISED ROUTE and press the

dial to conﬁrm.

8

It is also possible to select a destination FROM ADDRESS BOOK or

FROM LAST DESTINATIONS.

Repeat steps 5 to 7 for the STREET

and N° functions.

FROM ADDRESS BOOK

FROM LAST DESTINATIONS

You can zoom in/zoom out on the map using the dial.

It is possible to scroll the map or select its orientation via the short-

cut menu of the FULL SCREEN MAP. Press the dial then select

MAP SETTINGS or ZOOM/SCROLL and conﬁrm.

Select the SAVE TO ADDRESS BOOK function to record the

address entered in a directory ﬁle. Press the dial to conﬁrm the

selection.

MyWay permits the recording of up to 4 000 contact ﬁles.

03

NAVIGATION - GUIDANCE

The route selected by the MyWay audio/telephone depends directly on the route options.

Changing these options may change the route completely.

ROUTE OPTIONS

1

2

3

5

Select the "Route dynamics" function.

This function gives access to the

"Trafﬁc independent" or "Semi-

dynamic" options.

Press the NAV button.

ROUTE DYNAMICS

Press the NAV button again or select

the "Navigation" Menu function and

press the dial to conﬁrm.

6

Select the "Avoidance criteria"

function. This function provides

access to the AVOID options

(motorways, toll roads, ferries).

"NAVIGATION" MENU

Select the "Route options" function

and press the dial to conﬁrm.

AVOIDANCE CRITERIA

ROUTE OPTIONS

7

Turn the dial and select the

"Recalculate" function to take into

account the route options selected.

Press the dial to conﬁrm.

4

Select the "Route type" function and

press the dial to conﬁrm. This function

allows you to change the route type.

RECALCULATE

ROUTE TYPE

9.48

Stopovers can be added to the route once the destination has been selected.

ADDING A STOPOVER

1

5

Enter a new address, for example.

Press the NAV button.

ADDRESS INPUT

6

7

Once the new address has been

entered, select OK and press the dial

to conﬁrm.

2

3

Press the NAV button again or select

the "Navigation" Menu function and

press the dial to conﬁrm.

OK

"NAVIGATION" MENU

Select the "Stopovers" function and

press the dial to conﬁrm.

Select "Recalculate" and press the

dial to conﬁrm.

STOPOVERS

RECALCULATE

4

Select the "Add stopover" function

(5 stopovers maximum) and press the

dial to conﬁrm.

The stopover must be completed or deleted in order for the guidance

to continue to the next destination. Otherwise, the MyWay will always

return you to the previous stopover.

ADD STOPOVER

03

NAVIGATION - GUIDANCE

The points of interest (POIs) indicate all of the service locations in the vicinity (hotels, various

businesses, airports...).

SEARCHING FOR POINTS OF INTEREST

Select the "POI in city" function to

search for POIs in the city required.

1

6

Select the country then enter the

name of the city using the virtual

keypad.

Press the NAV button.

POI IN CITY

Press the NAV button again or select

the "Navigation" Menu function and

press the dial to conﬁrm.

2

A list of cities present in the country selected can be accessed via

the LIST button on the virtual keypad.

"NAVIGATION" MENU

3

4

Select the "POI search" function and

press the dial to conﬁrm.

Select the "POI in country" function

to search for POIs in the country

required.

7

8

POI SEARCH

Select the "POI nearby" function to

search for POIs around the vehicle.

POI IN COUNTRY

POI NEARBY

Select the "POI near route" function to

search for POIs near the route.

5

Select the "POI near destination"

function to search for POIs near the

point of arrival of the route.

POI NEAR ROUTE

POI NEAR DESTINATION

9.50

This icon appears when several POIs are

grouped together in the same area. Zooming in

on this icon shows details of the POIs.

03 NAVIGATION

- GUIDANCE

List of POIs

* According to availability in the country.

03

NAVIGATION - GUIDANCE

Contact a CITROËN dealer for details of the procedure for obtaining the HAZARDOUS LOCATION POIs.

Updating of the HAZARDOUS LOCATION POIs requires an SDHC (High Capacity) compatible reader.

NAVIGATION SETTINGS

1

4

Select the "Navi volume" function and

turn the dial to set the volume of each

voice synthesiser (trafﬁc information,

alert messages…).

Press the NAV button.

NAVI VOLUME

2

5

Press the NAV button again or select

Select the "POI categories on Map"

function to select the POIs to be

displayed on the map by default.

the "Navigation" Menu function and

press the dial to conﬁrm.

"NAVIGATION" MENU

POI CATEGORIES ON MAP

3

6

Select "Set parameters for risk areas"

to gain access to the "Display on

map", "Visual alert" and "Sound alert"

functions.

Select the "Settings" function and

press the dial to conﬁrm.

SETTINGS

SET PARAMETERS FOR RISK AREAS

9.52

04

TRAFFIC INFORMATION

The ﬁlters are independent and their results are cumulative.

We recommend a ﬁlter on the route and a ﬁlter around the vehicle of:

-

2 miles (3 km) or 3 miles (5 km) for a region with heavy trafﬁc,

6 miles (10 km) for a region with normal trafﬁc,

CONFIGURE THE FILTERING AND

DISPL

A

Y

O

F TMC MESSAGES

30 miles (50 km) for long journeys (motorway).

Select the ﬁlter of your choice:

MESSAGES ON ROUTE

3

1

Press the TRAFFIC button.

ONLY WARNINGS ON ROUTE

ALL WARNING MESSAGES

ALL MESSAGES

The messages appear on the map

and on the list.

To exit, press ESC.

The list of TMC messages appears under the "Trafﬁc" Menu sorted

in order of proximity.

4

5

Select the "Geo. Filter" function and

press the dial to conﬁrm.

GEO. FILTER

2

Press the TRAFFIC button again or

select the "Trafﬁc" Menu function and

press the dial to conﬁrm.

Then select the radius of the ﬁlter

(in miles (km)) required in accordance

with the route, press the dial to

conﬁrm.

"TRAFFIC" MENU

When all of the messages on the

route are selected, the addition of a

geographical ﬁlter is recommended

(within a radius of 3 miles (5 km) for

example) to reduce the number of

messages displayed on the map.

The geographical ﬁlter follows the

movement of the vehicle.

The TMC icon, at the bottom left of the screen, may

appear in 3 different forms:

- No TMC station available,

- TMC station available, no message on route,

- TMC station available and messages on route

(if guidance is active).

The external environment (hill, building, tunnel, underground car park...) may interfere with the

reception, including in RDS following mode. This phenomenon is a normal result of the way in which

radio waves are transmitted and does not in any way indicate a failure of the audio equipment.

05

RADIO

SELECTING A STATION

RDS - REGIONAL MODE - TRAFFIC INFO

1

When the current radio station is

displayed on the screen, press the

dial.

Press the RADIO button to display

the list of stations received locally

sorted in alphabetical order.

Select the station required by turning

the dial and press to conﬁrm.

The radio source short-cuts menu appears and provides access to

the following short-cuts:

2

TRAFFIC INFO (TA)

RDS

While listening to the radio, press one of the

buttons to select the previous or next station on

the list.

RADIOTEXT

REGIONAL PROG.

AM

3

Select the function required and press

the dial to conﬁrm to gain access to

the corresponding settings.

A long press of one of the buttons starts the

automatic search for a station with a lower or

higher frequency.

The RDS, if displayed, allows you to continue listening to the same

station by automatic retuning to alternative frequencies. However, in

certain conditions, coverage of an RDS station may not be assured

throughout the entire country as radio stations do not cover 100 % of

the territory. This explains the loss of reception of the station during

a journey.

Press one of the buttons on the numeric keypad for more than

2 seconds to store the current station.

Press the button on the numeric keypad to recall the stored radio

station.

9.54

06

MUSIC MEDIA PL

A

Y

ERS

CD, MP3/WMA CD

INFORMATION AND ADVICE

The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 Audio Layer 3

and the WMA format, an abbreviation of Windows Media Audio and

the property of Microsoft, are audio compression standards which

permit the recording of several tens of music ﬁles on a single disc.

The MyWay will only play audio ﬁles with the extension ".mp3" with

a speed of between 8 Kbps and 320 Kbps and the extension ".wma"

with a speed of between 5 Kbps and 384 Kbps.

It also supports the VBR (Variable Bit Rate) mode.

No other type of ﬁle (.mp4, .m3u...) can be played.

In order to be able to play a recorded CDR or CDRW, when

recording it is preferable to select the ISO 9660 level 1, 2 or Joliet

standard.

If the disc is recorded in another format it may not be played

correctly.

It is recommended that the same recording standard is always used

for an individual disc, with as low a speed as possible (4x maximum)

for optimum sound quality.

In the particular case of a multi-session CD, the Joliet standard is

recommended.

It is advisable to restrict ﬁle names to 20 characters, without using of

special characters (e.g.: " " ? ; ù) to avoid any playing and displaying

problems.

SELECTING/PL

A

Y

ING MUSIC

CD, MP3/WMA CD

1

4

5

6

Select the music source required:

CD, MP3/WMA CD. Press the dial to

conﬁrm. Play begins.

Press the MUSIC button.

Press the up or down button to select

the next/previous folder.

The list of tracks or MP3/WMA ﬁles appears under "Music" Menu.

2

Press the MUSIC button again or

select the "Music" Menu function and

press the dial to conﬁrm.

Press one of the buttons to select a

music track.

Press and hold one of the buttons for

fast forward or rewind play.

"MUSIC" MENU

3

Select the "Select music" function and

The playing and displaying of an MP3/WMA compilation may

depend on the recording programme and/or the settings used.

We recommend the ISO 9660 ﬁle standard.

press the dial to conﬁrm.

SELECT MUSIC

9.56

06

MUSIC MEDIA PL

A

Y

ERS

USING THE EXTERNAL DEVICE (AUX)

AUDIO/RCA CABLE NOT SUPPLIED

CD CHANGER

PLAYING A CD (NOT MP3/WMA COMPATIBLE)

1

2

3

Insert one or more CDs in the

changer. Press the MUSIC button.

Connect the portable equipment (MP3/WMA player…) to the audio

sockets (white and red, RCA type) in the glove box using a JACK/

RCA audio cable.

Press the MUSIC button again or

select the MUSIC MENU function and

press the dial to conﬁrm.

2

Press the MUSIC button then press

it again or select the "Music" Menu

function and press the dial to conﬁrm.

MUSIC MENU

Select the SELECT MUSIC function

and press the dial to conﬁrm.

3

4

Select the "External device" function

and press the dial to activate it.

SELECT MUSIC

EXTERNAL DEVICE

4

5

Select the CD CHANGER music

source and press the dial to conﬁrm.

Select the AUX music source and

press the dial to conﬁrm. Play begins

automatically.

CD CHANGER

Press one of the buttons on the

numeric keypad to select the

corresponding CD.

The display and management of the controls is via the portable

equipment.

07

BLUETOOTH TELEPHONE

The services available depend on the network, the SIM card and the compatibility of the Bluetooth

equipment used. Refer to your telephone’s manual and your operator to check which services you

have access to. A list of mobile telephones which offer the best range of services is available from

dealers.

CONNECTING A TELEPHONE

For safety reasons and because they require prolonged attention on

the part of the driver, the operations for pairing the Bluetooth mobile

telephone to the hands-free system of the MyWay must be carried

out with the vehicle stationary and the ignition on.

4

For a ﬁrst connection, select

SEARCH PHONE and press the dial

to conﬁrm. Then select the name of

the telephone.

SEARCH PHONE

1

Activate the telephone’s Bluetooth function.

The last telephone connected is reconnected

automatically.

5

Enter the authentication code on the

telephone. The code to be entered is

displayed on the screen.

2

3

Press the PHONE button.

Once the telephone has been connected, MyWay can synchronise

the address book and the call list. This synchronisation may take a

few minutes.

Select the TELEPHONE MENU

function and press the dial to conﬁrm.

1

To change the telephone connected,

press the PHONE button, then select

TELEPHONE MENU and press the

dial to conﬁrm.

TELEPHONE MENU

2

The list of telephones connected previously (4 maximum) appears

on the multifunction display. Select the telephone required for a new

connection.

Select CONNECT PHONE. Select the

telephone and press to conﬁrm.

CONNECT PHONE

9.58

RECEIVING A CALL

MAKING A CALL

1

Press the PHONE button.

An incoming call is announced by a ring and a superimposed display

on the multifunction screen.

The list of the last 20 calls made and received in the vehicle appears

under "Phone" Menu. You can select a number and press the dial to

make the call.

Select the "Yes" tab to accept or "No"

to refuse and conﬁrm by pressing the

dial.

2

3

2

3

Select the "Phone" Menu function and

press the dial to conﬁrm.

YES

NO

"PHONE" MENU

To hang up, press the PHONE button

or press the dial and select "End call"

then conﬁrm by pressing the dial.

Select "Dial number", then dial the

telephone number using the virtual

keypad.

END CALL

DIAL NUMBER

It is also possible to select a number from the address book. You can

select "Dial from address book". The MyWay permits the recording of

up to 4 000 entries.

Press the end of the steering wheel control to

accept the call or end the call in progress.

Press the end of the steering wheel control for more than two

seconds to gain access to the address book.

08

CONFIGURATION

This function gives access to the options: System language, Date & Time, Display (Brightness, Colour,

Map colour), Vehicle, Units, System.

SETTING THE DATE AND TIME

1

5

Select the "Date format" function and

press the dial to conﬁrm.

Press the SET UP button.

Conﬁrm the format required using

the dial.

2

3

Select the "Date & Time" function and

press the dial to conﬁrm.

6

DATE & TIME

Select the "Time format" function and

press the dial to conﬁrm.

Conﬁrm the format required using

the dial.

Select the "Set date & time" function

and press the dial to conﬁrm.

SET DATE & TIME

Pressing the SET UP button for more than 2 seconds gives

access to:

4

Set the parameters one by one using

the direction arrows and conﬁrm by

means of the dial.

DESCRIPTION OF THE UNIT

GPS COVERAGE

DEMO MODE

9.60

09

TRIP COMPUTER

VEHICLE DIAGNOSTICS

A FEW DEFINITIONS

Range: displays the distance which can travelled with the remaining

fuel detected in the tank, basd on the average consumption over the

last few miles (kilometres).

This displayed value may vary signiﬁcantly following a change in the

vehicle speed or the relief of the route.

When the range falls below 20 miles (30 km), dashes are displayed.

After ﬁlling with at least 5 litres of fuel, the range is recalculated and

is displayed when it exceeds 60 miles (100 km).

If, whilst driving, dashes are displayed continuously in place of the

digits, contact a CITROËN dealer.

- The "vehicle" tab:

The range, the current consumption

and the distance remaining.

- The "1" (route 1) tab with:

The average speed, the average

consumption and the distance

travelled calculated over route "1".

- The "2" (route 2) tab with the same

functions for a second route.

Current fuel consumption: only calculated and displayed above

20 mph (30 km/h).

Average fuel consumption: this is the average fuel consumption

since the last trip computer zero reset.

Distance travelled: calculated since the last trip computer zero

reset.

Distance remaining to the destination: calculated with reference

to the ﬁnal destination, entered by the user. If guidance is activated,

the navigation system calculates it as a current value.

Each press of the button at the end of the wipers stalk displays the

various trip computer data in succession, according to the display.

Average speed: this is the average speed calculated since the last

trip computer zero reset (ignition on).

10

SCREEN MENU MAP

MAIN FUNCTION

CHOICE A

1

2

choice A1

choice A2

CHOICE B...

3

"MUSIC" MENU

SELECT MUSIC

SOUND SETTINGS

Balance/Fader

Bass/Treble

"RADIO" MENU

WAVEBAND

FM

1

2

3

AM

3

"TRAFFIC" MENU

MESSAGES ON ROUTE

ONLY WARNINGS ON ROUTE

ALL WARNING MESSAGES

ALL MESSAGES

MANUAL TUNE

SOUND SETTINGS

Balance/Fader

Bass/Treble

Equalizer

2

1

Equalizer

2

Linear

4

3

Classic

4

Jazz

GEO. FILTER

Rock/Pop

Linear

4

Within 2 miles (3 km)

Within 3 miles (5 km)

Within 6 miles (10 km)

Within 30 miles (50 km)

Within 60 miles (100 km)

Techno

Classic

4

3

Vocal

Jazz

Loudness

Rock/Pop

3

Speed dependent volume

Reset sound settings

Techno

Vocal

3

Loudness

3

Speed dependent volume

Reset sound settings

"NAVIGATION" MENU

ABORT GUIDANCE/RESUME GUIDANCE

DESTINATION INPUT

Address input

STOPOVERS

Add stopover

Address input

ROUTE OPTIONS

Route type

1

2

3

Fast route

4

Navigate HOME

Choose from address book

Choose from last destinations

Rearrange route

Replace stopover

Delete stopover

Recalculate

Short route

3

4

Country

Optimized route

Route dynamics

Trafﬁc independent

Semi-dynamic

4

City

4

3

Street

3

4

House number

Start route guidance

Postal code

Avoidance criteria

Avoid motorways

Avoid toll roads

Avoid ferries

3

4

Save to address book

Intersection

Fast route

4

Short route

City district

Optimized route

Recalculate

3

Geo position

POI SEARCH

POI nearby

SETTINGS

2

Map

Navi volume

3

Navigate HOME

Choose from address book

Choose from last destinations

POI near destination

POI in city

POI categories on Map

3

POI in country

POI near route

TMC STATION INFORMATION

2

9.64

"PHONE" MENU

DIAL NUMBER

"SETUP" MENU

SYSTEM LANGUAGE

Deutsch

Dark blue

4

1

Map colour

3

2

DIAL FROM ADDRESS BOOK

CALL LISTS

Day mode for map

Night mode for map

Auto. Day/Night for map

4

3

English

CONNECT PHONE

Search phone

Español

Français

VEHICLE

3

2

3

Phones connected

Disconnect phone

Italiano

Vehicle information

Alert log

Nederlands

Polski

4

Rename phone

Delete pairing

Delete all pairings

Show details

Status of functions

4

Portuguese

DATE & TIME

Set date & time

Date format

Time format

DISPLAY

UNITS

2

Temperature

2

3

Celsius

3

4

SETTINGS

Fahrenheit

2

Select ring tone

Metric/Imperial

3

Phone/Ring tone volume

Enter mailbox number

Kilometres (Consumption: l/100)

Kilometres (Consumption: km/l)

Miles (Consumption: MPG)

2

4

Brightness

Colour

3

Pop titanium

SYSTEM

4

2

Toffee

Factory reset

4

3

Blue steel

Technogrey

Software version

Automatic scrolling

In-Car Technology -> MyWay for Your Citroen Dispatch Van Second Generation (2007-2015)

Related Topics

In-Car Technology

Popular Owner Manuals

Latest Owner Manuals