157
Safety
Active City Brake
Active City Brakeis a driving assistance system
that aims to avoid a frontal collision or reduce
the speed of an impact if the driver does
not take sufficient action (inadequate brake
application).
Principle
conditions for activation
Active City Brakeonly operates if the following
conditions are met:
●
●
●
ignition on,
the vehicle is in a forward gear,
speed is between about 3 and 18 mph
(5 and 30 km/h),
●
●
the braking assistance systems (ABS,
EBFD, emergency braking assistance) are
not faulty,
the trajectory control systems (ASR, DSC)
are not deactivated or faulty,
the vehicle is not in a tight corner,
the system has not been triggered during
the previous 10 seconds.
This system is designed to improve driving safety.
It remains the driver's responsibility to
continuously monitor the state of the traffic and
to assess the distances and relative speeds of
other vehicle.
●
●
Active City Brakecan in no circumstances
replace the need for vigilance on the part of
the driver.
Using a laser sensor located at the top of the
windscreen, this system detects a vehicle
running in the same direction or stationary
ahead of your vehicle.
When necessary, the vehicle's braking system
is operated automatically to avoid a collision
with the vehicle ahead.
never look at the laser sensor through
an optical instrument (magnifying glass,
microscope...) at a distance of less than
10 centimetres: risk of eye injury.
Automatic braking occurs later than if
done by the driver, so as to intervene
only when there is a high risk of
collision.
English 