Get Audio and Telematics Guide for Citroen Ds3 SUV Second Generation (2018-2025)

Audio and telematics

Emergency or assistance call

Localised Emergency Call

In an emergency, press this

button for more than 2 seconds.

Flashing of the green LED and

a voice message confirm that

the call has been made to the

"Localised Emergency Call"*

centre.

If an impact is detected by the airbag

control unit, and independently of

the deployment of any airbags, an

emergency call is made automatically.

Pressing this button again immediately cancels

the call.

The green LED goes off.

Pressing this butt on (at any time) for more than

8 seconds cancels the call.

If you benefit from the DS Connect

BOX offer with the SOS and assistance

pack included, you also have available

additional services in your MyCITROËN

personal space, via the CITROËN

Internet website in your country,

The green LED remains on (without flashing)

when communication is established.

It goes off at the end of the call.

accessible on www.citroen.com.

This call is dealt with by the "Localised

Emergency Call", which receives locating

information from the vehicle and can send a

detailed alert to the appropriate emergency

services.

In countries in which a centre is not

operational, or when the locating service

has been expressly declined, the call is dealt

with directly by the emergency services (112)

without the vehicle location.

* These services are subject to conditions and

availability.

Consult a CITROËN dealer.

267

Audio and Telematics

Localised Assistance Call

Press this button for more than

2 seconds to request assistance

if the vehicle breaks down.

A voice message confirms that

the call has been started*.

Operation of the system

When the ignition is switched

If you purchased your vehicle outside

on, the green LED comes on for

3 seconds indicating that the

system is operating correctly.

the CITROËN dealer network, we

invite you to have a dealer check the

configuration of these services and, if

desired, modified to suit your wishes.

In a multi-lingual country, configuration

is possible in the official national

language of your choice.

Pressing this button again immediately cancels

the request.

The cancellation is confirmed by a voice

message.

If the orange LED flashes: there

is a system fault.

If the orange LED is on continuously: the

backup battery must be replaced.

In either case, contact a CITROËN dealer.

For technical reasons, particularly

to improve the quality of Telematic

services to customers, the

manufacturer reserves the right to

carry out updates to the vehicle's

on-board telematic system.

* These services are subject to conditions and

availability.

Consult a CITROËN dealer.

269

Audio and Telematics

7-inch touch screen tablet

gPS satellite navigation - Multimedia audio - Bluetooth^®telephone

Contents

270

First steps

Steering mounted controls

272

Menus

273

Navigation

Navigation - Guidance

Trafﬁc

274

282

286

Radio Media

Radio

288

294

DAB (Digital Audio Broadcasting) radio

296

298

302

310

311

314

316

324

Media

Settings

Internet

Internet browser

MirrorLink^®

Telephone

Frequently asked questions

As a safety measure, the driver should only carry out operations

which require prolonged attention while the vehicle is stationary.

The display of the energy economy mode message signals

that the system is about to go into standby. Refer to the Energy

economy (mode) section.

The system is protected in such a way that it will only operate in

your vehicle.

First steps

Use the buttons arranged below the touch

screen tablet for access to the menu carousel,

then press the virtual buttons in the touch

screen tablet.

Each menu is displayed in one or two pages

(primary page and secondary page).

In very hot conditions, the system may

go into stand-by (screen and sound

completely off) for a minimum period of

5 minutes.

Primary page

Secondary page

271

Audio and Telematics

Short-cuts: using the touch buttons in the upper

band of the touch screen tablet, it is possible

to go directly to the selection of audio source,

the list of stations (or titles, depending on the

source).

The screen is of the "resistive" type, it

is necessary to press firmly, particularly

for "flick" gestures (scrolling through a

list, moving the map...). A simple wipe

will not be enough. pressing with more

than one finger is not recognised.

The screen can be used when wearing

gloves. This technology allows use at

all temperatures.

Press Menu to display the menu

carousel.

Selecting the audio source (depending on

version):

Volume adjustment (each source is

independent, including traffic announcements

(TA) and navigation instructions).

To clean the screen, use a soft

non-abrasive cloth (spectacles cloth)

without any additional product.

Do not use pointed objects on the

screen.

-

"FM" / "AM" / "DAB"* stations.

"USB" memory stick.

Jukebox*, after first copying audio files to

the internal memory of the system.

Telephone connected by Bluetooth* and

audio streaming Bluetooth* (streaming).

Media player connected to the auxiliary

socket (jack, cable not supplied).

Increase volume.

Do not touch the screen with wet

hands.

-

Reduce volume.

-

Following prolonged operation in very

high temperatures, the volume may be

limited to protect the system. The return to

normal takes place when the temperature

in the passenger compartment drops.

* Depending on equipment.

Steering mounted controls

Radio: select the previous/next

preset station.

Radio: automatic search for a lower

frequency.

Media: select a genre / artist / folder

from the list.

Select the previous/next entry in a

menu.

Media: select previous track.

Media, press and hold: fast back.

Jump in the list.

Radio: automatic search for a higher

frequency.

Media: Select next track.

Media, press and hold: fast forward.

Jump in the list.

Increase volume.

Decrease volume.

Change the audio source.

Confirm a selection.

Call/end call on the telephone.

Press for more than 2 seconds:

access to the telephone menu.

Mute: cut the sound by pressing

the volume increase and decrease

buttons simultaneously.

Restore the sound by pressing one of

the two volume buttons.

273

Audio and Telematics

Menus

navigation

Settings

Radio Media

(Depending on equipment)

Select radio, the different music sources and

view photos.

Set the sounds and brightness for the

instruments and controls.

Enter navigation settings and choose a

destination.

Internet

Telephone

driving

(Depending on equipment)

Connect a telephone by Bluetooth^®.

Access the trip computer, activate, deactivate

or enter settings for certain vehicle functions.

Connect using the "Internet browser".

Operate certain applications on your

smartphone via "MirrorLink".

Navigation

Level 1

Level 2

Level 3

navigation

Route settings

1

275

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Display recent destinations

Enter destination

Fastest

Shortest

Time/distance

Ecological

Tolls

Choose the navigation criteria.

The map displays the route chosen according to

these criteria.

Calculatory criteria

Ferries

navigation

Traffic

Settings

navigation

Strict-Close

Show route on map

Confirm

Display the map and start navigation.

Save the options.

Save current location

Stop navigation

Save the current address.

Delete the navigation information.

Choose the volume for voice and announcement

of street names.

Voice synthesis

Detour from your initial route by a determined

distance.

diversion

Display in text mode

Zoom in.

Zoom out.

navigation

Display in full screen mode.

Use the arrows to move the map.

Switch to 2D map.

Level 1

Level 2

Level 3

Address

Enter destination

1

2

3

4

5

6

7

8

9

10 11

For managing contacts and

their addresses, refer to the

"Telephone" section.

navigation

Contacts

12 13 14 15

To use the telephone functions,

refer to the "Telephone" section.

277

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Curr. location

7

8

Points of Interest

Town centre

Save

Address settings

9

Address

2

Save the current address.

Add a waypoint to the route.

Press to calculate the route.

10

11

Add waypoint

Navigate to

Addresses

View

12

13

14

15

navigation

Secondary page

Enter destination

1

Contacts

Navigate to

Search for contact

Call

Select a contact then calculate the route.

Display the map and zoom to view the roads.

3

4

From map

Itinerary

Create, add or delete a waypoint or view the

itinerary.

5

6

Stop

Delete navigation information.

Press to calculate the route.

navigate to

Level 1

Level 2

Level 3

1

navigation

Search for a point of interest

16 17 18 19

Point of interest displayed on the map

20

21

22

279

Audio and Telematics

Level 1

Level 2

All POIs

Level 3

Comments

16

17

18

19

navigation

Secondary page

Search for POI

List of categories available.

After choosing the category, select the points of

interest.

garage

dining/hotels

Personal

Search

1

Save the settings.

Select all

delete

20

21

22

navigation

Secondary page

Show POIs

Choose the display settings for POIs.

Save the options.

Import POIs

Confirm

Level 1

Level 2

Level 3

diversion

Traffic messages

1

Map settings

23 24 25 26

Map settings

navigation

27

28

29

Settings

27

28

29

Settings

30 31 32 33

Moving

between

the two

menus.

Settings

30 31 32 33

281

Audio and Telematics

Level 1

Level 2

Level 3

Comments

On the route

23

24

25

Around vehicle

navigation

Settings for the choice of messages and the

filter radius.

near destination

Secondary page

Traffic messages

1

Detour over a distance

Recalculate route

detour

26

Finish

Save your selections.

Flat view north heading

Flat view vehicle heading

Perspective view

Orientation

Maps

27

28

29

navigation

Secondary page

Map settings

Choose the display and orientation of the map.

1

"Day" map colour

"Night" map colour

Automatic day/night

Aspect

Confirm

Save the settings.

Route settings

Voice

30

31

32

33

navigation

Secondary page

Settings

Enter settings and choose the volume for the

voice and announcement of street names.

Alert!

1

Traffic options

Confirm

Save your selections.

Navigation - Guidance

Choosing a new destination

Towards a new destination

Press on navigation to display the

primary page.

Select "Save" to save the address

entered as a contact entry.

The system allows up to 200 entries.

To delete navigation information, press

"Settings".

10

Press on the secondary page.

Press "Stop navigation".

1

Select "navigate to".

Select "Enter destination".

To resume navigation press "Settings".

Press "Resume navigation".

Choose the navigation criteria:

"Fastest" or "Shortest" or "Time/

distance" or "Ecological".

Select "Address".

2

Select the "Country:" from

the list offered, then in the

same way the "City:" or its

post code, the "Road:", the

"n°:".

Choose the restriction criteria:

"Include tollroads", "Include

ferries", "Traffic", "Strict", "Close".

Select "Confirm".

Confirm each time.

Or

Press "Show route on map" to start

navigation.

283

Audio and Telematics

Towards a recent destination

Towards a contact

Press on navigation to display the

primary page.

Select a destination from

the contacts in the list

offered.

To be able to use navigation "towards

a contact in the directory", it is first

necessary to enter the address for your

contact.

Press on the secondary page.

Select "navigate to".

1

Press on navigation to display the

primary page.

Select "Enter destination".

Select the criteria then "Confirm" to

start navigation.

Press on the secondary page.

1

Select an address from

the list offered.

Select "Enter destination".

Select "navigate to".

Select "Contacts".

3

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

Towards gPS coordinates

Towards a point on the map

Towards points of interest (POI)

Press on navigation to display the

primary page.

Press on navigation to display the

primary page.

Points of Interest (POI) are listed in different

categories.

Press on the secondary page.

Press on navigation to display the

primary page.

1

Select "Enter destination".

Press on the secondary page.

1

Select "Address".

Select "From map".

Select "Search for POI".

2

4

Enter the "Longitude:"

then the "Latitude:".

Zooming in on the map shows points with

Select "All POIs "

information.

16

A long press on a point opens its content.

Or

Select "navigate to".

"garage",

17

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

Or

"dining/hotels",

18

285

Audio and Telematics

Or

An annual mapping update allows

new points of interest to be presented

to you.

You can also update the Risk areas /

Danger areas every month.

The detailed procedure is available on:

http://citroen.navigation.com.

"Personal",

19

Select a category from the

list offered.

Select "Search".

Select a point of interest

from the list offered.

Select "navigate to".

Trafﬁc

Hazard zone / danger zone

alert settings

Traffic information

display of messages

Press on navigation to display the

primary page.

This series of alerts and displays is

only available if Risk Areas have first

been downloaded and installed on the

system.

Press on the secondary page.

1

Select "Traffic messages".

Select "Settings".

Set the:

23

24

25

Select "Alarm!".

"On the route",

"Around",

32

It is then possible to activate Risk Areas alerts

then:

-

"Audible warning"

"Alert only when navigating"

"Alert only for overspeed"

"Display speed limits"

Timing: the choice of timing allows the

time before giving a Risk Area alert to be

defined.

"near destination", filters to fine-

tune the list of messages.

Press again to remove the filter.

Select "Confirm".

287

Audio and Telematics

Setting ﬁlters

Receiving TA messages

Select the message from

the list offered.

Press on navigation to display the

primary page.

Press on navigation to display the

primary page.

Press on the secondary page.

Select the magnifying glasses to

have vocal information.

1

Select "Settings".

Select "Voice".

TMC (Traffic Message Channel)

messages on GPS-Navigation contain

traffic information transmitted in real

time.

Select "Info options".

33

31

Select:

Activate / Deactivate "Traffic

(TA)".

-

"Warn of new messages",

"Speak messages".

The TA (Traffic Announcement)

function gives priority to TA alert

messages. To operate, this function

needs good reception of a radio station

transmitting this type of message.

When a traffic report is transmitted,

the current audio source is interrupted

automatically to play the TA message.

Normal playback of the audio source

resumes at the end of the transmission

of the message.

Then enter the filter radius.

Select "Confirm".

We recommend a filter radius of:

-

12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

Radio Media

Level 1

Level 2

List of FM stations

1

2

3

4

Preset

289

Audio and Telematics

Level 1

Level 2

Comments

Radio Media

List of FM stations

Press on a radio station to select it.

List

FM Radio

dAB Radio

AM Radio

Jukebox

USB

Radio Media

Source

Select change of source

3

MirrorLink

iPod

Bluetooth

AUX

Radio Media

Preset

Press an empty location to Preset it.

2

Level 1

Level 2

Level 3

List of FM stations

1

5

6

7

Media

Photos

8

9

10 11

Copy to Jukebox

Manage Jukebox

12

13

14

15 16 17 18

291

Audio and Telematics

Level 1

Level 2

Preset

Level 3

Comments

Press a radio station to select it.

Update the list of stations received.

Enter the desired radio frequency.

Save the settings.

5

6

7

Radio Media

Update list

Frequency

Confirm

Secondary page

Radio list

1

Home screen

Rotate

Display the selected photo in the home page.

Rotate the photo 90°.

8

9

Select all the photos in the list.

Press again to deselect.

Radio Media

Secondary page

Photos

Select all

10

Previous photo.

Pause / Play.

Next photo.

Display the photos in sequence, full screen.

The system supports the following image

formats: .gif, .jpg, .bmp, .png.

11 Slideshow

Full screen

Display the selected photo full-screen.

Choose a selection mode.

Sort by folder

12

Sort by album

13

Select all

14

Radio Media

Secondary page

Manage Jukebox

Copy

Copy files to the Jukebox.

Create folder

Rename

Delete

15

16

17

18

1

Choose the desired function.

Save the settings.

Magnifying glass

Select all

Confirm

Level 1

Level 2

Level 3

1

Media

Settings

19

20

21

Settings

19

20

21

20

293

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Radio Media

Secondary page

Media list

Presentation of the last media used.

1

Random (all

tracks):

Media

Random (current

album):

Choose the play settings.

19

Settings

Loop:

Aux. amplification

RDS options

Radio Media

Secondary page

Settings

DAB/FM options

Display Radio Text

Radio

Activate or deactivate the settings.

20

21

1

Settings

Digital radio slideshow

display

Traffic announcements (TA)

News - Weather

Announcements

Settings

Activate or deactivate the settings.

Save the settings.

Sport - Programm info

Flash - Unforeseen

events

Confirm

Radio

Selecting a station

Changing a radio frequency

Press on Radio Media to display the

primary page.

Press on Radio Media to display the

primary page.

Select "Preset".

2

3

Or

Select a preset radio station

in the list.

Press on Radio Media to display the

primary page.

If necessary, select change of

source.

By automatic frequency search

Press on the secondary page.

Select "FM Radio".

1

3

Press 3 or 4 to move the cursor for an

automatic search down or up for a radio

frequency.

Select "List" in the primary page.

Or

"AM Radio".

THEn

Select "Radio list" in the secondary

page.

Select change source.

Radio reception may be affected by

the use of electrical equipment not

approved by CITROËN, such as a USB

charger connected to the 12 V socket.

The exterior environment (hills,

buildings, tunnel, car park, below

ground...) may prevent reception,

even in RDS station tracking mode.

This phenomenon is normal in the

propagation of radio waves and is in no

way indicative of a fault with the audio

system.

Select a radio station from

the list offered.

3

Select "FM Radio".

Select "Update list" to refresh the

list.

Or

"AM Radio".

OR

Press Radio Media to display the

primary page.

295

Audio and Telematics

Preset a station

Activate/ deactivate RdS

OR

Select a radio station or frequency (refer to the

corresponding section).

Press on Radio Media to display the

primary page.

Press on Radio Media to display the

primary page.

Press on "Preset".

Press on the secondary page.

5

1

Press on the secondary page.

Select "Settings".

1

Select a number in the list to preset the

previously chosen radio station.

A long press on a number presets (memorises)

the station.

Press on Frequency.

Select "Radio".

7

20

Activate/deactivate "RdS

options".

Or

THEn

A press on this button presets all of

the stations one after the other.

Enter the frequency in full (e.g.:

92.10 MHz) using the keypad

then "Confirm".

4

RDS, if activated, allows you to continue

listening to the same station by automatic

retuning to alternative frequencies.

However, in certain conditions, coverage

of an RDS station may not be assured

throughout the entire country as

Recall pre-set stations

Press on Radio Media to display the

primary page.

Changing radio station

radio stations do not cover 100 % of

the territory. This explains the loss of

reception of the station during a journey.

Pressing the name of the current radio station

brings up a list.

To change radio station press the name of the

desired station.

Select "Save".

2

DAB (Digital Audio Broadcasting) radio

Short-cut: access to the choice of audio

Display of the name of the

current station.

source and the list of stations (or titles,

depending on the source).

Select the radio station.

Any thumbnail broadcast by

the station.

Manage the Jukebox.

Display current action.

Display the name and

number of the multiplex

service being used.

Display of "Radiotext" for

the current station.

Previous "Multiplex".

Previous radio station.

Next "Multiplex".

Next radio station.

Preset stations, buttons 1

to 15

Short press: select the

preset radio station.

Long press: preset a radio

station.

Select the audio source.

Display the "DAB" band.

Secondary page.

Display of options:

If the "DAB" radio station being listened to is not

available on "FM", the "DAB FM" option is greyed out.

if active but not available, the display will be greyed out,

if active and available, the display will be blank.

Journaline^®is a text-based information service designed for digital radio systems.

It provides text-based information structured around topics and sub-topics.

This service is available from the "LIST OF DAB STATIONS" page.

297

Audio and Telematics

digital radio

dAB / FM auto tracking

Digital radio provides higher quality

"DAB" does not cover 100% of the

territory.

If "DAB / FM auto tracking" is activated,

there is a difference of a few seconds

when the system switches to "FM"

analogue radio with sometimes a

variation in volume.

When the digital signal is restored,

the system automatically changes back

to "DAB".

reception and also the graphical display

of current information on the radio

station being listened to. Select "List" in

the primary page.

The range of multiplexes available is

displayed in alphabetical order.

When the digital radio signal is poor,

"DAB / FM auto tracking" allows you to

continue listening to the same station,

by automatically switching to the

corresponding "FM" analogue station

(if there is one).

Press on Radio Media to display the

primary page.

Press on Radio Media to display the

primary page.

If the "DAB" station being listened to

is not available on "FM" (" dAB/FM"

option greyed out), or "DAB / FM auto

tracking" is not activated, the sound

will cut out while the digital signal is too

weak.

Select change of source.

Select "dAB Radio".

Press on the secondary page.

3

1

Select "Settings".

Select "List" in the primary page.

Select "RAdIO".

20

or

Select "Radio list" in the secondary

page.

Select "digital/FM auto

tracking" then "Confirm".

Select the radio station from the list offered.

Media

USB player

Auxiliary socket (AUX)

Selection of source

Press on Media to display the

primary page.

Select change of source.

3

Insert the USB memory stick into the USB port

or connect the USB device to the USB port

using a suitable cable (not supplied).

Connect the portable device (MP3 player…) to

the auxiliary Jack socket using an audio cable

(not supplied).

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or connection of a USB

memory stick. The lists are memorised: if they

are not modified, the subsequent loading time

will be shorter.

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your

audio system.

Display and management of the controls are

via the portable device.

Choose the source.

The steering mounted SRC (source)

button can be used to go to the next

media source, available if the source

is active.

299

Audio and Telematics

Information and advice

The audio equipment will only play audio files

with".wma, .aac, .flac, .ogg and. mp3" file

extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 11, 22, 44

and 48 KHz.

Use only USB memory sticks formatted FAT32

(file allocation table).

The system supports USB mass

storage portable players, BlackBerry^®

devices or Apple^®players via USB

ports. The adaptor cable not supplied.

Control of the peripheral device is with

the audio system controls.

Other peripherals, not recognised on

connection, must be connected to the

auxiliary socket using a Jack cable (not

supplied).

The system does not support the simultaneous

connection of two identical devices

(two memory sticks or two Apple^®players) but

it is possible to connect one memory stick and

one Apple^®player at the same time.

It is recommended that the USB cable

for the portable device is used.

It is advisable to restrict file names to

20 characters, without using of special

characters (e.g.: " " ? ; ù) to avoid any playing

and displaying problems.

Bluetooth^®audio streaming Connecting Apple^®players

Streaming allows audio files on your telephone

to be played through the vehicle's speakers.

The classifications available are those

of the portable device connected

(artists / albums / genres / playlists /

audiobooks / podcasts).

The default classification used is by

artist. To modify the classification used,

return to the first level of the menu

then select the desired classification

(playlists for example) and confirm

to go down through the menu to the

desired track.

Connect the telephone: see the "Telephone"

section, then "Bluetooth".

Choose the "Audio" or "All" profile.

If play does not start automatically, it may be

necessary to start the audio playback from the

telephone.

Control is from the peripheral device or by

using the audio system buttons.

Control is via the audio system.

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

Once connected in streaming mode,

the telephone is considered to be a

media source.

It is recommended that you activate

"Repeat" on the Bluetooth peripheral.

301

Audio and Telematics

Managing the Jukebox

Connect the device (MP3 player...) to the USB

port or auxiliary Jack socket using a suitable

audio cable.

Select the magnifying glass to enter

the folder or album and select audio

file by audio file.

Select "Confirm" then "Copy".

When no audio file is copied to the

system, which has a capacity of 8 GB,

all of the Jukebox function symbols are

greyed and are not available.

Select "new folder" to create a

folder structure in the Jukebox.

15

Select "Media list".

Or

Select "Keep structure" to retain the structure

from the device.

Select copy "Copy Jukebox".

While copying the system returns to the

primary page; you can go back to the copy view

at any time by selecting this button.

Select "Sort by folder".

12

Or

"Sort by album".

13

Settings

Level 1

Level 2

Level 3

Audio settings

3

4

5

6

7

3

4

5

6

7

Audio settings

1

2

3

4

5

6

7

303

Audio and Telematics

Level 1

Level 2

Ambience

Level 3

Comments

Choose the sound ambience.

3

4

Balance

Sound distribution using the Arkamys^®system.

Set the volume or activate the link to vehicle

speed.

Sound effects

Ringtones

5

6

7

Settings

Audio settings

Set the telephone ringtone and volume.

Set the volume and voice for speaking street

names

Voice

Confirm

Save your settings.

Settings

Function that turns off the display.

Pressing the screen reactivates it.

2

Turn off screen

Level 1

Level 2

Units

1

Factory settings

8

9

10

Configuration

Adjust date and time

8

9

10

display screen

305

Audio and Telematics

Level 1

Level 2

Comments

Set the units used to display distance, fuel

consumption and temperature.

Units

8

9

Settings

Select the desired data in the list then press

Delete.

delete data

Factory settings

Confirm

Secondary page

System Settings

1

Return to factory settings.

Save the settings.

10

Settings

Secondary page

Time/date

Confirm

Set the date and time then confirm.

1

Activate automatic text scrolling

Activate animations

Confirm

Settings

Secondary page

Screen settings

Activate or deactivate the setting then confirm.

Level 1

Level 2

Choice of language

1

Configuration

Calculator

Calendar

307

Audio and Telematics

Level 1

Level 2

Comments

Settings

Secondary page

Languages

Confirm

Select the language then confirm.

1

Settings

Secondary page

Calculator

Select the calculator.

Settings

Secondary page

Calendar

Select the calendar.

1

Audio settings

Press Settings to display the primary

page.

On-board audio: Arkamys^©Sound

Staging optimises sound distribution in

the the passenger compartment.

The distribution (or spatialisation using

the Arkamys^®system) of sound is an

audio process that allows the audio

quality to be adapted to the number of

passengers in the vehicle.

Select "Audio settings".

Available only with the 6-speaker

configuration.

Select "Ambience"

"Balance"

3

4

5

6

The audio settings (Ambience, Bass,

Treble and Loudness) are different

and independent for each sound

source.

Or

The settings for F-R balance and L-R

balance are common to all sources.

"Sound effects"

"Ringtones"

-

"Ambience" (choice of 6 musical

ambiences)

-

"Bass"

"Treble"

"Loudness" (Activate/Deactivate)

"Balance" ("driver", "All

passengers", "Front only")

"Audible response from touch

screen"

Or

"Voice".

-

7

"Volume linked to vehicle

speed:" (Activate/Deactivate)

309

Audio and Telematics

Modifying system settings

Press on Settings to display the

Press on "Settings" to display the

primary page.

Press on the secondary page.

Press on the secondary page

1

Select "System Settings".

Select "Screen settings".

Select "Time/date" to change the

time zone, synchronisation with GPS,

the time and its format, then the date.

Select "Units" to change the units

of distance, fuel consumption and

temperature.

Activate or deactivate "Activate

automatic text scrolling" and

"Activate animations"

Select "Languages" to change

language.

8

Select "delete data" to delete the

list of recent destinations, personal

9

Select "Calculator" to display a

calculator.

points of interest, contacts in the list.

Select "Calendar" to display a

Choose the item then select "delete".

calendar.

Select "Factory settings" to return

to the original settings.

10

Internet

Level 1

Level 2

Level 3

1

311

Audio and Telematics

Internet browser

Press on Internet to display the

primary page.

Press on "Internet browser" to

displays the browser's home page;

first connect your smartphone by

Bluetooth, option "Internet", see the

"Telephone" section.

Authentication for Internet browsing via

a smartphone is done using the Dial-Up

Networking (DUN) standard.

Some smartphones of the latest

generation do not support this

standard.

Level 1

Level 2

Level 3

Bluetooth (devices)

1

2

3

4

5

Usage monitor

Internet

Wi-Fi network connection

6

7

8

9

10 11

313

Audio and Telematics

Level 1

Level 2

Search

Level 3

Comments

Start the search for a device to connect.

2

3

Start or end the Bluetooth connection to the

Internet

Connect / disconnect

selected device.

Secondary page

Import contacts from the selected telephone to

save them in the audio system.

1

Update

4

5

Bluetooth

Connection

delete

Delete the selected telephone.

Save the settings.

Confirm

Internet

Reset

Secondary page

Transfer rate

Reset the usage monitor, them confirm.

Confirm

All

Display all Wi-Fi networks.

6

7

Secure

Display secure Wi-Fi networks.

Memorise the selected Wi-Fi network(s).

Add a new Wi-Fi network.

Internet

Stored

8

Secondary page

WiFi connection

1

Add

9

Activate / deactivate

Connect

Activate or deactivate a Wi-Fi network.

10

11

Select a Wi-Fi network found by the system and

connect to it.

MirrorLink^®

315

Audio and Telematics

Press "MirrorLink^®" to start

the application in the system.

MirrorLink^®smartphone

connection

Please note:

-

if your mobile is supported, to make

it "MirrorLink^®" compatible, some

phone manufacturers nevertheless

invite you to first download a

dedicated application.

As a safety measure and because it

requires sustained attention by the

driver, using a smartphone when

driving is prohibited.

All operations must be done with the

vehicle stationary.

Start the application on the

smartphone.

-

iPhone^®is not supported yet; an

Apple^®application, "CarPlay^®", is

being developed.

During the procedure, a page

showing the conditions for use is

displayed.

Accept to start and end the

connection.

The synchronisation of a personal

smartphone allows applications on a

smartphone that are adapted to the

MirrorLink^®technology to be displayed

in the vehicle's screen.

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

The "Audio source" and "Telephone"

functions remain available in the margin of the

MirrorLink^®display.

The principles and standards are

constantly evolving; for information

on supported smartphones, go to the

CITROËN website for your country.

Select MyCITROËN if present.

Go to the home page to return to the

"MirrorLink^®" display.

When connecting a smartphone to

the system, it is recommended that

Bluetooth^®be started on the smartphone

Voice recognition

and

a USB cable is connected. The

smartphone charges when

connected by a USB cable.

Press the end of the lighting control stalk to

start voice recognition of your smartphone via

the system.

Voice recognition requires a compatible

telephone connected to the vehicle by

Bluetooth.

From the system, press "Internet" to

display the primary page.

Telephone

Level 1

Level 2

Call log

Level 3

4

5

6

7

12

13

Contacts

1

2

3

8

9

10 11

14 15 16 17 18

317

Audio and Telematics

Level 1

Level 2

All calls

Level 3

Comments

4

5

6

7

Incoming calls

Outgoing calls

Contacts

Telephone

Call log

After making choices, start the call.

2

View

12

13

Magnifying glass

Create

Call

Addresses

8

9

New

14

15

16

17

18

Modify

Delete

View

Telephone

Contacts

Delete all

Search for contact

Confirm

After making choices, start the call.

3

navigate to

Search for contact

Call

10

11

Level 1

Level 2

Level 3

Bluetooth (devices)

1

19 20 21 22

devices detected

Telephone connection

Telephone Options

23 24 25 26

319

Audio and Telematics

Level 1

Level 2

Search

Level 3

Comments

Start the search for another peripheral device to

19

20

connect.

Telephone

connection

Start or stop the Bluetooth connection to the

selected peripheral device.

Connect/disconnect

Secondary page

Import the contacts from the selected telephone

to store them in the audio system.

1

Update

21

22

Bluetooth

Connection

delete

Delete the selected telephone.

Save the settings.

Confirm

Telephone

connection

Telephone

Secondary page

devices detected

Audio streaming

Start the search for peripheral devices.

Search

for devices

Internet

Cut the microphone temporarily so that the

contact cannot hear your conversation with a

passenger.

Put on hold

23

Import the contacts from the selected telephone

to save then in the audio system.

Telephone

connection

Update

24

25

1

Ringtones

Choose the telephone ringtone and volume.

Secondary page

Contact records used and free, percentage of

storage space used by internal contacts and

Bluetooth contacts.

Telephone options

Memory info.

Confirm

26

Save the settings.

Pairing a Bluetooth^®

telephone

Procedure from the system

For reasons of safety and because they

require prolonged attention on the part

of the driver, the operations for pairing

the Bluetooth mobile telephone to the

hands-free system of the audio system

must be carried out with the vehicle

stationary.

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (telephone

configuration).

Select the name of the

desired peripheral from the

list and "Confirm".

Press on Telephone to display the

primary page.

Enter a code of at least 4 figures for

the connection then "Confirm".

Procedure (short) from the

telephone

Press on the secondary page.

Enter this same code in the telephone then

accept the connection.

1

In the Bluetooth menu of your device, select the

system name in the list of devices detected.

Select "Bluetooth connection".

Select Search.

The list of telephones detected is

displayed.

The system offers to connect the telephone:

-

in "Telephone" (hands-free kit, telephone

only),

Enter a code of at least 4 figures in the device

and confirm.

in "Audio streaming" (streaming: wireless

playing of audio files from the telephone),

in "Internet" (internet browsing, only if your

telephone is compatible with the "DUN"

Dial-Up Networking Bluetooth standard).

Enter this same code in the system,

select "OK" and confirm.

19

Select one or more profiles and confirm.

If the telephone is not detected, it is

recommended that you switch the Bluetooth

function on your telephone off and then on again.

321

Audio and Telematics

Connecting a Bluetooth^®

peripheral device

Automatic reconnection

On switching on the ignition, the telephone

connected when the ignition was last switched

off is automatically reconnected, if this

connection mode had been activated during the

pairing procedure.

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth telephone

used. Check the telephone manual and

with your network provider for details of

the services available to you.

Depending on the type of telephone,

the system will ask you to accept or not

the transfer of your contacts.

If not, select "Update".

The connection is confirmed by the display of a

message and the name of the telephone.

Manual connection

On return to the vehicle, if the last telephone

connected is present again, it is reconnected

automatically and within around 30 seconds

after switching on the ignition the pairing is

done without any action on your part, with

(Bluetooth activated).

To modify the automatic connection mode,

select the telephone in the list then select the

desired profile.

The ability of the system to connect

with only one profile depends on the

telephone. The two profiles may both

connect by default.

Press on Telephone to display the

primary page.

Press on the secondary page.

1

Visit www.citroen.co.uk for more information

(compatibility, additional help, ...).

Select "Bluetooth" to display the list

of paired peripherals.

The recognised telephone

appears in the list.

Select the peripheral to connect.

Press on "Search".

19

Depending on your telephone, you may be

asked to accept automatic connection every

time the ignition is switched on.

The connection is confirmed by the display of a

message and the name of the telephone.

Managing paired

telephones

Receiving a call

Making a call

An incoming call is announced by a ring and a

superimposed display in the screen.

Using the telephone is not

recommended while driving.

Park the vehicle.

Make the call using the steering

mounted controls.

This function allows the connection or

disconnection of a peripheral device as

well as the deletion of a pairing.

Make a short press on the steering

mounted TEL button to accept an

incoming call.

Press on Telephone to display the

primary page.

Make a long press

Calling a new number

Press on the secondary page.

Press on Telephone to display the

primary page.

1

on the steering mounted TEL button

to reject the call.

Select "Bluetooth" to display the list

of paired peripheral devices.

Enter the phone number using the

digital keypad.

Press "Call" to start the call.

Or

Select the peripheral in the list.

Select "Search for devices"

19

Select "End call".

Calling a contact

Press on Telephone to display the

primary page.

Or

"Connect / disconnect" to start or

end the Bluetooth connection with

the selected device.

20

Or make a long press

Or

on the steering mounted TEL button.

"delete" to delete the pairing.

22

323

Audio and Telematics

Managing contacts / entries

Select "Contacts".

Press on Telephone to display the

primary page.

Select "directory information" for

the number of entries used,

available, ...

3

18

Select the desired contact from the list offered.

Select "Contacts".

3

Select "Call".

Select "Add contact".

9

Calling a recently used number

Select "Create" to add a new contact.

14

Press on Telephone to display the

primary page.

Or

"Modify" to edit the selected contact.

Select "Call log".

15

2

Or

Select the desired contact from the list offered.

"delete" to delete the selected

contact.

16

It is always possible to make a call

directly from the telephone; park the

vehicle first as a safety measure.

Or

"delete all" to delete all information

for the selected contact.

17

Frequently asked questions

The table below gives answers to the most frequently asked questions on your audio system.

navigation

QUESTIOn

AnSWER

SOLUTIOn

The route calculation is

not successful.

The navigation settings may conflict with the current location

(exclusion of toll roads on a toll motorway).

Check the settings in the "Navigation" menu.

The POIs do not appear.

The POIs have not been selected.

Select the POIs in the list of POIs.

The Hazard zone audible

warning does not work.

The audible warning is not active.

Activate audible warnings in the "Navigation"

menu.

The system does not

The guidance criteria do not take account of TMC messages.

Select the "Traffic info" function in the list of

suggest a detour around

an incident on the route.

guidance criteria.

I receive a Accident-prone Other than guidance, the system announces all Hazard zone

Zoom in on the map to view the exact position of

the Accident-prone area. Select "On the route" to

no longer receive alerts other than guidance or to

reduce the time for the announcement.

area alert which is not on

positioned in a cone located in front of the vehicle. It may provide

an alert for a Hazard zone located on nearby or parallel roads.

my route.

325

Audio and Telematics

QUESTIOn

AnSWER

SOLUTIOn

Certain traffic jams along

the route are not indicated receive the traffic information.

in real time.

On starting, it is several minutes before the system begins to

Wait until the traffic information is being received

correctly (display of the traffic information icons

on the map).

The filters are too restrictive.

Modify the "Geographic filter" settings.

In certain countries, only major routes (motorways...) are listed for

the traffic information.

This phenomenon is normal. The system is

dependent on the traffic information available.

The altitude is not

On starting, the initialisation of the GPS may take up to 3 minutes to Wait until the system has completed starting

displayed.

receive more than 4 satellites correctly.

up, so that there is GPS coverage of at least

4 satellites.

Depending on the geographical environment (tunnel...) or the

weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system

is dependent on the GPS signal reception

conditions.

Radio

QUESTIOn

AnSWER

SOLUTIOn

The quality of reception of The vehicle is too far from the transmitter used by the station

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in

the geographical area.

the radio station listened

to gradually deteriorates

or the stored stations do

not function (no sound,

87.5 Mhz is displayed...).

listened to or there is no transmitter in the geographical area

through which the vehicle is travelling.

The environment (hills, buildings, tunnels, basement car parks...)

block reception, including in RDS mode.

This phenomenon is normal and does not

indicate a fault with the audio system.

The aerial is absent or has been damaged (for example when going Have the aerial checked by a CITROËN dealer.

through a car wash or into an underground car park).

I cannot find some radio

stations in the list of

stations received.

The station is not received or its name has changed in the list.

Some radio stations send other information in place of their name

(the title of the song for example).

The system interprets this information as the name of the station.

The name of the radio

station changes.

327

Audio and Telematics

Media

QUESTIOn

AnSWER

SOLUTIOn

Playback of my USB

memory stick starts only

after a very long wait

(around 2 to 3 minutes).

Some files supplied with the memory stick may greatly slow down

access to reading the memory stick (multiplication by 10 of the

catalogue time).

Delete the files supplied with the memory stick

and limit the number of sub-folders in the file

structure on the memory stick.

When I connect my iPhone When the iPhone connects automatically as a telephone, it forces

Disconnect and reconnect to the USB port (the

USB function takes priority over streaming).

as telephone and to the

USB port at the same

time, I am unable to play

the music files.

the streaming function. The streaming function takes the place

of the USB function which is then not useable, there is a period

without sound of the track being played with Apple^®players.

Some characters in the

media information are not

displayed correctly while

playing.

The audio system does not display some types of characters.

The peripheral device connected does not support automatic play.

The Bluetooth profile does not allow the transfer of this information.

Use standard characters to name tracks and

folders.

Playing of streaming files

does not start.

Start the playback from the device.

The names of tracks and

the track length are not

displayed on the screen

when streaming audio.

Settings

QUESTIOn

AnSWER

SOLUTIOn

In changing the setting

of treble and bass the

equalizer setting is

deselected.

The selection of an equalizer setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain

the desired musical ambience.

In changing the equalizer

setting, treble and bass

return to zero.

When changing the

balance settings, the

distribution setting is

deselected.

The selection of a distribution setting imposes the balance settings. Modify the balance or distribution settings to

Modifying one without the other is not possible. obtain the desired musical ambience.

When changing a sound

distribution setting,

the balance setting is

deselected.

329

Audio and Telematics

QUESTIOn

AnSWER

SOLUTIOn

There is a difference in

sound quality between the Treble, Equalizer and Loudness can be adapted to the different

different audio sources.

For optimum sound quality, the audio settings for Volume, Bass,

Check that the audio settings for (Volume, Bass,

Treble, Equalizer, Loudness) are adapted to the

sources listened to. It is advisable to set the

audio functions (Bass, Treble, Fr-Re balance,

Le-Ri balance) to the middle position, select the

"Linear", musical ambience and set the loudness

correction to the "Inactive" position in radio

mode.

sound sources, which may result in audible differences when

changing source.

With the engine off, the

When the engine is switched off, the system's operating time

Start the vehicle's engine to increase the battery

charge.

system switches off after a depends on the state of charge of the battery.

few minutes of use. The switch-off is normal: the system switches to economy mode

and switches off to prevent discharging of the vehicle's battery.

Telephone

QUESTIOn

AnSWER

SOLUTIOn

I cannot connect my

Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the

telephone may not be visible.

-

Check that your telephone's Bluetooth

function is switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with the system.

The volume depends both on the system and on the telephone.

You can check the compatibility of your

telephone at www.citroen.co.uk (services).

The volume of the

telephone connected

in Bluetooth mode is

inaudible.

Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

The ambient noise level has an influence on the quality of

telephone communication.

Reduce the ambient noise level (close the

windows, reduce the booster fan speed, slow

down, ...).

Some contacts are

duplicated in the list.

The options for synchronizing contacts are synchronizing the

contacts on the SIM card, the contacts on the telephone, or both.

When both synchronizations are selected, some contacts may be

duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

Contacts are not shown in Some telephones offer display options. Depending on the settings

Modify the display setting in the telephone

directory.

alphabetical order.

chosen, contacts can be transferred in a specific order.

The system does not

The Bluetooth mode does not permit sending SMS text messages

receive SMS text messages. to the system.

331

Audio and Telematics

Audio system

Audio system / Bluetooth^®

Contents

332

First steps

Steering mounted controls

Menus

333

334

Radio

334

Media

336

Telephone

340

Screen menu map(s)

342

Frequently asked questions

346

As a safety measure, the driver must only carry out operations

which require prolonged attention while the vehicle is stationary.

Your Audio system is coded in such a way that it will only operate

in your vehicle.

When the engine is switched off and to prevent discharging of the

battery, the audio equipment may switch off after a few minutes.

First steps

Buttons 1 to 6

Select a pre-set radio station.

Long press: pre-set a station.

Automatic frequency search down/up.

Select previous/next CD, MP3 or

USB track.

Select next frequency down/up.

Select previous/next MP3 folder.

Select previous/next folder / genre /

artist / playlist (USB).

Select the screen display mode:

Date, audio functions, trip computer,

telephone.

On / Off, volume setting.

Select source:

The DARK button changes the

screen display for improved driving

comfort at night.

Radio; USB; AUX; CD; Streaming.

Confirm.

1^stpress: upper bar only illuminated.

2^ndpress: black screen.

3^rdpress: return to standard display.

Audio settings:.

Front/rear fader, left/right balance,

bass/treble, loudness, audio

ambiences.

TA (Traffic Announcements) on/off.

Long press: PTY* (radio Programme

TYpe).

Display the list of local stations.

Long press: CD tracks or MP3 folders

(CD / USB).

Abandon the current operation.

Display main menu.

Eject CD.

Selection of AM / FM wavebands.

* Available according to version.

333

Audio and Telematics

Steering mounted controls

Radio: select the previous/next pre-

set station.

Radio: automatic search for a lower

frequency.

USB: select genre / artist / folder

from the classification list.

Select the previous/next item in a

menu.

CD / MP3 / USB: selection of the

previous track.

CD / USB: continuous press: fast

back.

Move in the list.

Radio: automatic search for a higher

frequency.

Volume increase.

CD / MP3 / USB: selection of the next

track.

CD / USB: continuous press: fast

forward.

Volume decrease.

Move in the list.

Change audio source.

Confirm a selection.

Call/end call on the telephone.

Press for more than 2 seconds:

telephone main menu.

Mute: press the volume increase and

decrease buttons simultaneously.

The sound is restored by pressing

one of the two volume buttons.

Menus

Screen C

Radio

Selecting a station

Screen A

Press the SOURCE button several

times in succession and select the

radio.

Press the BAnd AST button to

select a waveband.

Audio functions

Radio; CD; USB; AUX.

For an overview of the menus available,

refer to the "Screen menu map"

section.

Briefly press one of the buttons to

carry out an automatic search of the

radio stations.

Trip computer

Enter distances; Alerts: Status of

functions.

Press one of the buttons to carry out

a manual search up / down for radio

frequencies.

Bluetooth^®: Telephone - Audio

Pairing; Hands-free kit; Streaming.

Personalisation-configuration

Vehicle parameters; Display;

Languages.

Press the LIST REFRESH button to

display the list of stations received

locally (30 stations maximum).

To update this list, press for more

than two seconds.

335

Audio and Telematics

RdS

Receiving TA messages

Select "Activate RdS".

The TA (Traffic Announcement)

The external environment (hills,

function gives priority to TA alert

messages. To operate, this function

needs good reception of a radio station

transmitting this type of message.

When a traffic report is transmitted, the

current audio source (Radio, CD, ...)

is interrupted automatically to play the

TA message. Normal playback of the

audio source resumes at the end of the

transmission of the message.

buildings, tunnels, basement car

parks, ...) may block reception,

including in RDS mode. This is a

normal effect of the way in which radio

waves are transmitted and does not

indicate any failure of the audio system.

Press OK, RDS is displayed in the

screen.

Press the MEnU button.

In "Radio" mode, press OK directly to activate /

deactivate RDS mode.

Select "Audio functions".

Press OK.

RDS, if displayed, enables you to continue

listening to the same station by automatic

retuning to alternative frequencies.

However, in certain conditions, coverage

of an RDS station may not be assured

throughout the country as radio stations

do not cover 100 % of the territory. This

explains the loss of reception of a station

that can occur during a journey.

Press the TA button to activate or

deactivate traffic messages.

Select the "FM waveband

preferences" function.

Press OK.

Media

USB player

This unit consists of a USB port

and an auxiliary Jack socket,

depending on model.

Press REFRESH LIST briefly to

display the previously selected

classification.

Navigate through the list using the

left/right and up/down buttons.

Insert a USB memory stick into the USB port

or connect a USB peripheral device to the USB

port using a suitable cable (not supplied).

Confirm the selection by pressing

OK.

The system creates playlists

(temporary memory), which can take

from a few seconds to several minutes

on the first connection.

Press one of these buttons to gain

access to the previous / next track in

the list.

Press and hold one of the buttons for

fast forward or back.

Press and hold REFRESH LIST to

display the different classifications.

Reducing the number of non-music

files and the number of folders reduces

this waiting time. Playlists are updated

every time the ignition is switched off or

a USB memory stick is connected.

The lists are memorised: if the lists are

not changed, the subsequent loading

time is reduced.

Select by "Folder" / "Artist" /

"genre" / "Playlist".

Press one of these buttons to

gain access to the previous / next

"Folder" / "Artist" / "genre" /

"Playlist" in the list

Press OK to select the classification

required, then press OK again to

confirm.

337

Audio and Telematics

Auxiliary socket (AUX)

Cd player

Insert circular compact discs only.

Some anti-pirating systems, on original discs

or CDs copied using a personal recorder, may

cause faults which are no reflection on the

quality of the vehicle's player.

To play a disc which has already

been inserted, press the SOURCE

button several times in succession

and select Cd.

Insert a CD in the player, play begins

automatically.

Press one of the buttons to select a

track on the CD.

Connect the portable device (MP3 player, …) to

the auxiliary Jack socket using an audio cable

(not supplied).

Press the LIST REFRESH button to

display the list of tracks on the CD.

Press the SOURCE button several

times in succession and select AUX.

Press and hold one of the buttons for

fast forward or fast back.

First adjust the volume on your portable device

(to a high level). Then adjust the volume on

your audio system. Operation of controls is via

the portable device.

Do not connect a device to both the

Jack auxiliary socket and the USB port

at the same time.

Playing an MP3 Cd

compilation

Information and advice

Insert an MP3 CD compilation in the player.

The audio equipment searches for all of the

music tracks, which may take anything between

a few seconds and several tens of seconds,

before play begins.

To play a disc which has already

been inserted, press the SOURCE

button several times in succession

and select Cd.

The audio system will only play files with

the extension ".mp3" with a sampling rate of

22.05 KHz or 44.1 KHz. No other type of file

(.wma, .mp4, .m3u...) can be played.

Press one of the buttons to select a

It is advisable to restrict file names to

20 characters without using special characters

(e.g. " ? ; ù) to avoid any playing or displaying

problems.

folder on the CD.

On a single disc, the CD player can

read up to 255 MP3 files spread over

8 folder levels. However, it is advisable

to keep to a limit of two levels to reduce

the access time before the CD is

played.

While the CD is being played, the folder

structure is not followed.

All of the files are displayed on a single

level.

Press one of the buttons to select a

track on the CD.

In order to be able to play a recorded CDR or

CDRW, when recording, the ISO 9660 level 1.

2 or Joliet file format is recommended.

If the disc is recorded in another format, it may

not be played correctly.

It is recommended that the same recording

format is always used for an individual disc,

with as low a speed as possible (4x maximum)

for optimum sound quality.

Press the LIST REFRESH button to

display the list of directories of the

MP3 compilation.

Press and hold one of the buttons for

fast forward or backward play.

In the particular case of a multi-session CD, the

Joliet format is recommended.

339

Audio and Telematics

Bluetooth^®audio streaming Connecting Apple^®players

Use only USB memory sticks formatted FAT32

(File Allocation Table).

Streaming allows music files on the telephone

to be played via the audio system.

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

Connect the telephone: see the "Telephone"

Control is via the audio system.

section.

It is recommended that you use

genuine Apple^®USB cables for correct

operation.

Select in the "Bluetooth: Telephone - Audio"

menu the telephone to be connected.

The audio system connects to a newly paired

telephone automatically.

The classifications available are those of the

portable device connected (artists / albums /

genres / playlists / audiobooks / podcasts).

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

Activate the streaming source by

pressing the SOURCE button*.

Control of tracks to be played is via the buttons

on the audio system control panel and the

steering mounted controls**. The contextual

information can be displayed in the screen.

* In certain cases, play of the audio files must

be initiated from the keypad.

** If the telephone supports the function.

Telephone

Pairing a Bluetooth^®telephone

Screen C

(Available according to model and version)

In the menu, select:

Select the telephone to be connected from the

list. Only one telephone can be connected at

a time.

As a safety measure and because they

require prolonged attention on the part

of the driver, the operations for pairing

of the Bluetooth mobile telephone with

the Bluetooth hands-free system of

your audio equipment must be carried

out with the vehicle stationary and the

-

"Bluetooth: Telephone - Audio"

"Bluetooth configuration"

"Perform a Bluetooth search"

A virtual keypad is displayed in the screen:

enter a code with at least 4 digits.

A window is displayed with a message that a

search is in progress.

ignition on.

Confirm by pressing OK.

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth device

used.

Consult your telephone's manual and

your operator to find out which services

are available to you.

Go to www.citroen.co.uk for more information

(compatibility, more help, ...).

A message in the screen indicates the telephone

chosen. To accept the pairing, enter the same

code on the telephone, then confirm with OK.

If pairing fails, the number of attempts is not

limited.

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (telephone

configuration).

A message that the pairing has been

successful appears in the screen.

Press the MEnU button.

The first 4 telephones recognised are displayed

in this window.

The automatic connection authorised is only

active after the telephone has been configured.

The directory and the call list can be accessed

after the necessary synchronisation period.

The "Telephone" menu permits access to the

following functions in particular: "directory"*,

"Calls list", "Consult the paired equipment".

* If your telephone is fully compatible.

341

Audio and Telematics

Receiving a call

Making a call

Ending a call

An incoming call is announced by a ring and a

From the "Bluetooth: Telephone - Audio"

During a call, press this button for

superimposed display in the screen.

menu.

more than 2 seconds.

Select "Manage the telephone call".

Select the YES tab on the display

using the buttons.

Confirm with OK to end the call.

Select "Call".

Or

Select "Calls list".

Confirm by pressing OK.

Or

Select "directory".

The system accesses the telephone's

contacts directory, depending on its

compatibility, and while it is connected

by Bluetooth.

Press this button for more than

two seconds for access to your

directory, then navigate using the

thumb wheel.

Press this button at the steering

mounted controls to accept the call.

Or

To dial a number, use your telephone's keypad,

with the vehicle stationary.

With certain telephones connected by

Bluetooth you can send a contact to the

directory of the audio system.

Contacts imported in this way are

saved in a permanent directory

visible to all, whatever the telephone

connected.

The menu for the directory is not

accessible if it is empty.

Screen menu map(s)

Screen A

Radio-Cd

Units

Language

1

RdS options

Temperature: °Celsius / °Fahrenheit

Français

2

REg mode

Fuel consumption: KM/L - L/100 - MPg

Italiano

2

Cd repeat

nederlands

Portuguès

Português do Brasil

deutsch

2

Shuffle play

2

Vehicle conﬁg*

display adjust

1

R wiper in rev

Year

2

English

guide lighting

Month

2

Español

day

Čeština

Options

1

Hour

Hrvatski

diagnostic

2

Minutes

12 H/24 H mode

Magyar

View

3

Abandon

3

* The settings vary according to the trim level of

the vehicle.

343

Audio and Telematics

Screen C

Press the OK dial for access to

short-cut menus according to the

display on the screen.

Cd / MP3 Cd

USB

Radio

activate / deactivate Intro

activate / deactivate track repeat (of the

current folder / artist / genre / playlist)

activate / deactivate RdS

1

activate / deactivate track repeat (the

entire current CD for CD, the entire current

folder for MP3 CD)

activate / deactivate REg mode

activate / deactivate radiotext

1

activate / deactivate random play (of the

current folder / artist / genre / playlist)

activate / deactivate random play (the

1

entire current CD for CD, the entire current

folder for MP3 CD)

1

Screen C

Pressing the MEnU button displays:

Trip computer

Enter distance to destination

1

Audio functions

distance: x miles

2

Play modes

2

1

Warning log

Album repeat (RPT)

3

FM preferences

2

Vehicle diagnosis

Activate / deactivate

4

Alternative frequencies (RDS)

3

State of systems

Track random play (RDM)

3

Activate / deactivate

4

Activate / deactivate

Systems activated or deactivated

4

Regional mode (REG)

Activate / deactivate

4

Radio-text information (RDTXT)

Activate / deactivate

4

345

Audio and Telematics

Personalisation-

conﬁguration

Bluetooth: Telephone -

Audio

Deﬁne the vehicle parameters*

Bluetooth conﬁguration

Manage the telephone call

1

Display conﬁguration

Connect/disconnect an equipment

Telephone function

Terminate the current call

Activate secret mode

2

Brightness-video adjustment

Normal video

2

Audio Streaming function

Consult the paired equipment

Delete a paired equipment

Perform a Bluetooth search

3

Inverse video

3

Brightness (- +) adjustment

date and time adjustment

Setting the day/month/year

Setting the hour/minute

Choice of 12 h / 24 h mode

Choice of units

3

Call

1

Calls list

2

Audio and Telematics for Your Citroen Ds3 SUV Second Generation (2018-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals