Advertisement

Advertisement

DS 3 Cabrio -> Soft top for Your Citroen Ds3 SUV Second Generation (2018-2025)

Access  
Soft top  
Your vehicle is fitted with an electric soft top roof.  
Electric opening  
and closing  
The roof is opened and closed by pressing  
the control at the interior lamp, in the opening  
direction 1 and in the closing direction 2  
3
Access  
Operating zones  
Roof positions  
Operation of the roof is possible:  
-
-
engine running, or  
ignition on.  
In order to maintain the state of charge  
of the battery, it is recommended that the  
roof be operated with the engine running  
There are two operating zones:  
Zone A: horizontal operating zone, in manual  
or automatic mode.  
Zone B: vertical operating zone, in automatic  
mode only.  
Position 0: Roof completely closed.  
Position 1: Stop position for automatic roof  
closing.  
Position 2: Roof open horizontally.  
Position 3: Roof completely open.  
During operation of the roof with just  
the ignition on, starting the engine may  
cause the roof to stop, depending on  
the state of charge of the battery. To  
have the roof continue the operation,  
operate the control again after the  
engine has started.  
Before operating the roof, ensure that no occupant of the vehicle or person outside the  
vehicle could be subject to any risk related to the movement of the roof or the rear screen  
and that no object could interfere with the operation.  
4
Access  
Opening  
Manual mode  
Automatic mode  
In zone A, press and hold the control  
without passing the point of resistance to  
open the roof.  
The roof stops as soon as you release the  
control.  
In zone A, press the control beyond the  
point of resistance to begin opening the  
roof.  
During automatic operation of the roof  
in zone A, pressing the control stops  
the roof.  
Opening of the roof in zone B can only be done in automatic mode.  
5
Access  
Closing  
Manual mode  
Release the control: opening of the roof  
continues up to the maximum horizontal  
position (position 2).  
In zone B, a press on the control opens the  
roof completely (position 3).  
In zone A, press and hold the control  
without passing the point of resistance to  
close the roof.  
During complete opening of the roof,  
the rear screen comes down onto the  
rear shelf. Ensure that no object is left  
on the shelf which might damage the  
rear screen or the roof.  
During an operation in zone B, an  
instruction to stop the roof is not  
possible.  
Pressing the control reverses the  
direction of movement of the roof,  
whichever direction the control is  
pressed.  
Automatic opening of the roof in zone B  
is not possible if the boot is open.  
In the event of a problem, check that  
the boot is fully closed.  
This "anti-panic" function allows a quick  
change in direction of movement of the  
roof if suddenly required.  
6
Access  
Automatic mode  
The roof stops as soon as you release the  
control.  
To close the roof completely, press and  
hold the control until the the roof is heard  
to lock.  
In position 3, press the control to begin  
closing the roof.  
Release the control: closing of the roof  
continues up to position 2  
When the roof is completely open,  
the rear screen rests on the rear  
shelf.  
Do not place any object on the rear  
screen.  
Complete closing of the roof in zone A  
can only be done in manual mode.  
Press and hold the control until the roof  
is heard to lock.  
If the roof does not lock correctly,  
operate the control again with the  
engine running.  
If the problem persists, contact  
a CITROËN dealer or a qualified  
workshop.  
If the roof does not lock correctly, operate  
the control again with the engine running.  
If the problem persists, contact  
a CITROËN dealer or a qualified  
workshop.  
During an operation in zone B, an  
instruction to stop the roof is not  
possible.  
Pressing the control reverses the  
direction of movement of the roof,  
whichever direction the control is  
pressed.  
This "anti-panic" function allows a quick  
change in direction of movement of the  
roof in the event if suddenly required.  
Closing the roof in zone B can only be  
done in automatic mode.  
Access  
Aero-acoustic deflector  
An aero-acoustic deflector is available to  
improve the acoustic comfort of occupants of  
the vehicle in certain driving conditions (high  
speed), by reducing the turbulence in the  
passenger compartment resulting from the  
displacement of air.  
On opening the roof, the aero-acoustic  
deflector may be deployed if it is not secured.  
On closing the roof, the deflector folds away  
automatically.  
With the roof open, this deflector can be  
Between positions 2 and 1, pressing the  
control beyond the point of resistance  
allows automatic closing of the roof to  
position 1  
Between positions 1 and 0, press and hold  
the control until the roof closes fully.  
folded away manually and secured at its  
centre: press vertically down on the cross  
member near the paddle at the top of the  
deflector and clip this paddle in the cut-out.  
To release and deploy the deflector  
manually, press vertically down on the  
cross member near the paddle to unclip  
it from the cut-out and pull it gently  
towards you.  
During automatic closing of the roof  
in zone A (position 2 to position 1),  
pressing the control stops the roof.  
8
Access  
Operating the roof when  
driving  
Downgraded operation  
-
-
an opening operation in progress in zone B  
is continued through to completion,  
a closing operation in progress in zone B is  
stopped and complete opening of the roof  
to position 3 is carried out automatically,  
an opening or closing operation in zone B  
following an "anti-panic" function is  
-
continued through to completion.  
If the roof stops in zone B, a message in the  
screen will ask you to stop the operation of the  
roof immediately.  
The roof opening and closing control  
operates up to about 70 mph (120 km/h).  
Above this speed, a message in the  
screen informs you that operation of the  
roof is not possible (speed too high).  
A new operation of the roof will be  
possible as soon as the vehicle's speed  
drops below about 70 mph (120 km/h).  
Press and hold the control:  
-
in the opening direction to reach  
position 3  
-
in the closing direction to reach  
position 2  
If a roof operation is started while the vehicle's  
speed is below about 70 mph (120 km/h),  
exceeding this speed limitation leads to the  
following situations, depending on the type of  
roof operation in progress:  
You must not drive when the roof is  
stopped in zone B  
-
an operation in progress in zone A is  
stopped,  
9
Access  
Reinitialisation  
Precautions for use  
If the automatic roof operation mode is lost, the  
system must be reinitialised.  
Never place objects on the roof, whether open or closed.  
To avoid damaging the roof, do not open it under snowy or frosty conditions.  
Never use sharp tools to remove ice or accumulations of snow on the roof.  
Never use scrapers or aerosol products to remove ice that may have formed on the rear  
With the engine running, press and hold  
the control for closing the roof.  
After about 5 seconds, the roof closes  
completely to position 0  
screen.  
Avoid operating the heated rear screen when the roof is completely open (risk of  
overheating).  
The roof is then reinitialised.  
To limit the creation of folds in the roof fabric, it is recommended that the roof not be left  
open for long periods.  
Operation of the vehicle's air conditioning system is not recommended while the roof is  
open.  
Never place objects on the transverse roof support when the roof  
is open.  
Do not release the control during the  
reinitialisation procedure.  
In the event of prolonged storage of the vehicle outside, it is recommended that the roof be  
protected with a cover.  
It is recommended that the roof be closed when the vehicle is left parked.  
Even if the roof is closed, it is prudent not to leave any valuable objects inside  
the vehicle.  
When you leave the vehicle, remove the ignition key to avoid any unwanted operation  
of the roof.  
Operating  
fault  
In the event of an electrical fault,  
contact a CITROËN dealer or a  
qualified workshop.  
If your vehicle has a voice command system, this may not work as well when driving with  
the roof open.  
Protection of the roof opening and closing electric motors: during repeated opening and  
closing of the roof, the electric motors may become too hot and then no longer allow the  
roof to be opened or closed. Allow the motors to cool down by not operating the roof for  
ten minutes.