241
Checks
Checking levels
Check all of these levels regularly, in line with the maintenance and warranty guide. Top them up if necessary, unless otherwise indicated.
If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop.
Brake fluid level
Take care when working under the
bonnet, as certain areas of the engine
may be extremely hot (risk of burns)
and the cooling fan could start at any
time (even with the ignition off).
It is normal to top up the oil level
between two services (or oil changes).
CITROËN recommends that you check
the level, and top up if necessary, every
3 000 miles (5 000 kms).
The brake fluid level should be close
to the "MAX" mark. If it is not, check
the brake pad wear.
After topping up the oil, the check when
switching on the ignition with the oil
level indicator in the instrument panel
is not valid during the 30 minutes after
topping up.
Changing the fluid
Refer to the maintenance and warranty guide
for details of the interval for this operation.
Engine oil change
Oil level
The check is carried out either when
the ignition is switched on using the
oil level indicator in the instrument
panel, or using the dipstick.
Refer to the maintenance and warranty guide
for details of the interval for this operation.
In order to maintain the reliability of the engine
and emission control system, the use of
additives in the engine oil is prohibited.
Fluid specification
The brake fluid must conform to the
manufacturer's recommendations.
It will only be correct if the vehicle is on level
ground and the engine has been off for more
than 30 minutes.
Oil specification
The oil must be the correct grade for your
engine and conform to the manufacturer's
recommendations.
English 
